0
votes
0answers
7 views

Ping (DUP) with Linux bridges and tap devices

http://imgur.com/qPoy2QJ I have two Linux (Ubuntu 12.04) VM (running on KVM) that networked together using two Linux bridges as shown above. The network interfaces are Linux TAP devices. The problem ...
0
votes
1answer
25 views

Force all traffic from servers on the same bridge to pass through router interface

I have a bridge with all hosts from the 192.168.5.0/24 network connected to it.They all connect to this bridge via a secondary interface eth1. I have a router which connects this bridge to others on ...
0
votes
1answer
43 views

Linux Bridges - Tags on interface vs. on bridge

What is the difference between tagging on the bridge vs a physical interface then adding that tagged interface onto the bridge? I'm assuming if I want two total VLANs segmenting network traffic to ...
0
votes
1answer
36 views

If one subnet can see another does that mean that there is a bridge between two interfaces?

This might seem like kind of a dumb question, but...say for example... I have a router running OpenWRT or some Linux distro and that router or box has two interfaces (lets say for sake of example a ...
1
vote
0answers
41 views

Bridging Adapter in Ubuntu 12.04 LTS for KVM

Fresh install of Ubuntu 12.04 LTS with libvert/KVM installed. I have 2 virtual machines that I need need to be on the same LAN as the host. The host has two physical interfaces eth0 and eth1. eth1 is ...
-1
votes
1answer
98 views

Ethernet Bridging With USB-to-Ethernet Adapter

I have a USB-to-ETHERNET adapter (CP-USB-RJ45M) with which I am trying to create an ethernet bridge in CentOS Linux for ip-forwarding within a private LAN test network. I modified my /etc/rc.local ...
2
votes
1answer
191 views

How to configure the bridge over bonding in RHEL 6.4 Server?

Has installed a system (rhel-server-6.4-x86_64-dvd.iso). KVM over which set. The host machine and the guest-machine assigned its own IP-address, configured for this bridge br0. Everything works. Now ...
1
vote
1answer
308 views

ARP response is not present on the other port of linux bridge based on ubuntu 13.10

I recently build linux based bridge for packet monitoring purpose, but there is BIG problem. the environment is, overall env. target of monitoring is VMs on vSphere. two vSwitches are configured ...
0
votes
0answers
153 views

access tap interface in network namespace across machines

I want to be able to access services running on a TAP interface within a namespace from outside the machine where it is running. I have setup that looks like this - VM1/Machine1 +eth0 : Public ...
0
votes
1answer
182 views

LXC container can only access host via bridge

I have an LXC container with i686 Ubuntu 12.04 running on a x86_64 Ubuntu 12.04 host. I've set up a bridge using instructions here. However the ping from the container only goes through to the host ...
0
votes
1answer
292 views

How to setup IP alias on bridged interface in Ubuntu

How do I setup an IP alias on a bridge (br0) device on Ubuntu ? If I wait for br0 to come up and then do /sbin/ifconfig br0:0 192.168.10.1 netmask 255.255.255.0 then it works fine. If however ...
0
votes
0answers
48 views

openvpn bridged mode: interface config with loopback

I'm currently running an openvpn server using routed mode (ubuntu 12.04) Because I have written a network application that uses broadcast, I think I have no choice but to go to bridged mode. However, ...
1
vote
1answer
636 views

Multiple, different VLAN trunks to KVM guests (Linux)

I've hit a roadblock of sorts with an architectural challenge. I've got a server running KVM - which will feature a number of guests, some running virtualised firewalls and others, just plain web ...
0
votes
1answer
240 views

tap interfaces always disabled in linux bridge

I have a physical interface eth0, and I want to create two virtual interfaces and bridge them with eth0. For this purpose I do: #Create the virtual interfaces tunctl -t tap0 tunctl -t tap1 ifconfig ...
2
votes
1answer
101 views

Filter broadcast traffic in a bridge port

I have a linux bridge with three interfaces, e.g. tap0, tap1 and tap2. What I would like to do is to modify the standard bridge behavior in the following way: If a L2 broadcast is originated from ...
0
votes
0answers
56 views

Linux networking: issues with connection loss using xen virtualised xen guests (?)

I am encountering strange issue. I've several xen virtual machines deployed at HP Proliant Servers (120,360,380 gen5,6,7 - different). Some of them are PVM XEN running linux guest, some of them ...
0
votes
1answer
66 views

libvirtd - Getting vps to use existing bridge

I've been working on getting KVM running on CentOS 6.4 and ran into a snag. After pouring through several online docs about setting up a bridge for the vps to connect to, and manually attempting to ...
0
votes
1answer
298 views

Xen dom0 not forwarding to domU over bridge

My setup is about as basic as you can get. I have 2 interfaces on dom0 (Debian Squeeze), eth0 and eth1. I created a bridge for eth1 to forward packets to domU that has a public IP address. I can ...
4
votes
1answer
202 views

New KVM guests cannot access outside LAN

I have a KVM host (at 192.168.0.10) that currently has one working KVM guest (at 192.168.0.12). On attempting to install a new KVM guest today, I reached a problem where the network on the new guest ...
0
votes
0answers
55 views

linux bridge multiple interfaces

I have Ubuntu box with bridge setup to forward traffic to vlan 10 interface and it works fine. My current setup eth0 | +-----------------+ | | | br0 | | ...
0
votes
0answers
169 views

Bridging two wireless interfaces with brctl?

I have this topology: [internet] ^ L-------[wlan0]-[host]-[wlan1]-----[client-1] I tried to bridge wlan0 wlan1 but it wont work with brctl; but magically when I issue this command #iw ...
0
votes
1answer
587 views

linux container bridge filters ARP reply

I am using kernel 3.0, and I have configured a linux container that is bridged to a tap interface in my host computer. This is the bridge configuration: :~$ brctl show bridge-1 bridge name ...
0
votes
0answers
155 views

After adding interface to a bridge, internet connection is down

I want to create a bridge on my Ubuntu machine, to build virtual OSs. I did: sudo brctl addbr br0 sudo brctl addif br0 eth0 sudo brctl stp br0 on sudo ifconfig br0 up dhclient br0 After sudo ...
2
votes
2answers
245 views

Packets only get forwarded when tcpdump running on bridge

I ran into the oddest thing when trying to debug a networking issue with OpenStack. I was doing a ping test between virtual machines. The ICMP request packets only made it to the destination host if I ...
0
votes
0answers
128 views

interface bridge under linux does not forward packets

I brought up a bridge between interfaces eth0 and eth3. Both of them are not addressed. I addressed bridge1 with 192.168.1.1. iptables FORWARD and OUTPUT chains are set to accept all. ...
0
votes
0answers
58 views

Filtering Broadcasted UDP Packets on a Specific Bridged Interface

My Linux PC has two network interfaces (eth0 & usb0) that are bridged. There is a service on my PC that broadcasts UDP packets on a specific port (7000). I would like to prevent these UDP packets ...
2
votes
1answer
168 views

Linux bridge static IP using only one NIC

It seems like I have a generic problem, but can't find any solution - every solution that I found so far on internets doesn't work for me. Let me first try to explain what I am trying to do - I have a ...
6
votes
0answers
77 views

Why do I need to assign static ip address to the bridge and not to the physical interface? [duplicate]

I have bond0 with two physical interfaces in it. Normally I used to assign static IP address to this bond0 to set up internet connectivity on the server. Now, because of LXC virtual guests, I had to ...
-2
votes
2answers
175 views

Linux Bridge allowing TCP but not UDP

I am using a linux bridge for monitoring some traffic on two vlans. I created two bridges br30 et br40 for each. My problem is that the TCP traffic make it through but not the UDP one. I thought of ...
2
votes
2answers
102 views

Disable IP on bridge

OK, I'm running libvirt on my server, I've only one interface, in order to use public IP in my VM I need to setup a bridge, everything OK so far.. But I don't want to setup a IP address at bridge ...
-1
votes
1answer
130 views

Debian bridged wifi connection doesn't start with system [closed]

I have t debian pc which is used as router. I'm using hostapd for creating wireless acess point, and i've bridged ethernet and wifi using brige-utils. My /etc/network/interfaces auto lo iface lo ...
0
votes
0answers
351 views

Routed libvirt/KVM network: response packets never reach guest

I'm desperately trying to get a routed networking up and running, but having extreme trouble with the setup. My Dedicated Server has 2 public IP addresses in the same subnet. I want to use 1 IP for ...
0
votes
0answers
71 views

Route traffic through internal (VDE) bridge

I have two NICs configured, let's say eth0 with IP 10.0.0.1/24 and eth1 with IP 192.168.1.1/24. IP forwarding is enabled, rp_filter is disabled. I've created 2 tap interfaces and bridged them with: ...
1
vote
0answers
344 views

arp reply is not processed

My eth0 interface does not process a legitimate arp reply. When I try to ping a host, I see arp request and reply with tcpdump from the host I try to ping from, but ip neigh says that there is a ...
0
votes
1answer
123 views

KVM guest can't find gateway

I try to setup a KVM server with bridged networking. I followed the docs, but still can't get it working. The guest system can ping the host system and the host the guest system, so the connection ...
0
votes
1answer
485 views

VirtualBox Bridged Network to Debian Fails to connect [closed]

I am running Oracle VM VirtualBox Manager v4.2.0 r80737 on Microsoft Windows 7 and aiming to set up a bridged network to my Debian Linux 6.0 Virtual Machine to be able to connect to it via Local ...
1
vote
1answer
462 views

Static route without knowing the nexthop (linux)

I have an eth3 interface in a linux router, with an adsl modem. This adsl modem is in bridged mode, so the public IP is assigned to eth3 (say 11.22.33.44), and the modem is just not seen by my server. ...
8
votes
2answers
1k views

Jumbo frames between KVM guest and host?

I am trying to implement a 9000 byte MTU for storage communication between KVM guests and the host system. The host has a bridge (br1) with a 9000 byte MTU: host# ip link show br1 8: br1: ...
1
vote
1answer
976 views

KVM is NOT seeing multiple bridges (only macvtap devices)

I am in the process of doing some thesis research about using ebtables and iptables on a KVM host to perform on-the-fly firewall restrictions to KVM guest VM's. Here is the problem: I have a bridge ...
0
votes
1answer
277 views

Xen: can't get Dom0 and the DomUs to ping eachother

We have installed a Xen (4.1) configuration and can't get Dom0 and the DomUs to communicate (ping eachother). The DomUs are able to ping eachother but not Dom0, and Dom0 cannot ping the DomUs. We ...
0
votes
1answer
2k views

Use one NIC to create multiple interfaces for Linux KVM

I am working on a thesis research project, and I am having some difficulty figuring out how to make one NIC spawn several "bridge" interfaces such that each KVM VM can be seen on the local network. I ...
3
votes
1answer
444 views

Network Bridge in dom0 can not ping domU's

I am using Debian wheezy with XEN 4.1. I have two network bridges xenbr0 and xenbr1. xenbr0 is linked to the real-eth0-nic so the domU's can talk to the outside world, which worked fine. xenbr1 was ...
0
votes
2answers
106 views

Linux: how to verify my network configuration before doing a restart

I am trying to build a network bridge for my VMs on a server. So I added a new file and changed another in the /etc/sysconfig/network-scripts directory. Then I did a network reboot with the ...
2
votes
1answer
139 views

Access to WAN from one VLAN

i want to create a VLAN for 3 guest VMs. I already have it and every VM can ping each other, but the problem is that any guest CAN NOT have access to Internet Network configuration in Host machine # ...
2
votes
1answer
288 views

Virtual bridged networking with VLAN, could not ping

I require a virtual network with VLAN be build between two virtual hosts - which can be (lxc/ vbox -ubuntu or win xp). I tried with lxc and vbox with Ubuntu and was finding difficult to make it work ...
4
votes
1answer
2k views

Stop duplicate icmp echo replies when bridging to a dummy interface?

I recently configured a bridge br0 with members as eth0 (real if) and dummy0 (dummy.ko if). When I ping this machine, I receive duplicate replies as: # ping SERVERA PING SERVERA.domain.local ...
2
votes
1answer
527 views

Possible for linux bridge to intercept traffic?

I have a linux machine setup as a bridge between a client and a server; brctl addbr0 brctl addif br0 eth1 brctl addif br0 eth2 ifconfig eth1 0.0.0.0 ifconfig eth2 0.0.0.0 ip link set br0 up I also ...
1
vote
1answer
665 views

How do I keep a bridge enabled on a bonded interface?

I'm working on setting up a pair of CentOS 6.3 servers that will run a couple of KVM vms and have come across a problem setting up a bridge on a bond. I am using Mode 4 (802.3ad) bonding on a pair ...
2
votes
2answers
2k views

KVM/Libvirt bridged/routed networking not working on newer guest kernels

I have a dedicated server running Debian 6, with Libvirt (0.9.11.3) and Qemu-KVM (qemu-kvm-1.0+dfsg-11, Debian). I am having a problem getting bridged/routed networking to work in KVM guests with ...
1
vote
1answer
1k views

Routing Traffic on Ubuntu to give Raspberry PI Internet Access [closed]

I'm hoping someone can point me in the right direction for setting up my Linux (Ubuntu 12.04) box to route traffic from eth0 to wlan0. I'll try and explain the problem I am trying to solve: I ...