0
votes
0answers
17 views

Bridging multiple VLANs in linux

I'd like to clarify some issues I have with bridging tagged traffic on Linux machine. I have a 2.6.20 (802.1q, bridging, ebtables are enabled) kernel and a device with two net interfaces (eth0 and ...
0
votes
1answer
171 views

Linux Bridges - Tags on interface vs. on bridge

What is the difference between tagging on the bridge vs a physical interface then adding that tagged interface onto the bridge? I'm assuming if I want two total VLANs segmenting network traffic to ...
1
vote
1answer
314 views

Scanning tagged traffic over bridge through iptables

I am working on bridge on linux box using brctl. Now I have to scan and monitor bridge traffic through iptables. So for the same I changed: net.bridge.bridge-nf-call-iptables = 0 to ...
2
votes
1answer
176 views

Questions about bridging VLANs

If, across the same building, I have two physically separate networks to connect devices together via simple switches, my understanding is that I could save myself some hardware-complexity if I were ...
1
vote
1answer
385 views

Cross-VLAN sharing and auto-discovery of selective resources

I have a network with several VLANs that each contain resources or clients with different access rights. For simplicity, let's say I have 3 VLANs: ID 10: Contains privileged clients and private ...
1
vote
1answer
228 views

bridge, vlan and internet access. How?

I'm trying to setup a working connection between my local network and the internet. First I setup a bridge (br0, has an IP address where the other interfaces don't) between eth0 (LAN) and eth1 ...
3
votes
0answers
76 views

Configuring Container with bridges and vlans (server only?)

I have two groups of lxc contianers on a server and want to isolate their network traffic for security reasons. I will be using port forwarding so the containers much each have separate IP's. I know I ...
-1
votes
1answer
76 views

Transfer VLAN tagged packets over WLAN? [closed]

I have the following composition of devices: [selfmade router] - ethernet - [WLAN router 1] ----- wlan ------ [WLAN router 2] WLAN router 2 has 5 ethernet ports, each as an own VLAN, so 5 VLANs. I ...
2
votes
1answer
2k views

Multiple, different VLAN trunks to KVM guests (Linux)

I've hit a roadblock of sorts with an architectural challenge. I've got a server running KVM - which will feature a number of guests, some running virtualised firewalls and others, just plain web ...
-2
votes
2answers
249 views

Linux Bridge allowing TCP but not UDP

I am using a linux bridge for monitoring some traffic on two vlans. I created two bridges br30 et br40 for each. My problem is that the TCP traffic make it through but not the UDP one. I thought of ...
1
vote
0answers
503 views

debian KVM - network bonding fails with vlan and bridge

i have a Debian 6 system configured with 2 NICs these NICs are used on a bond (bond0) which is used by bridge that require to use VLAN. i can get connection between guests running on VLAN10 but it ...
2
votes
1answer
166 views

Access to WAN from one VLAN

i want to create a VLAN for 3 guest VMs. I already have it and every VM can ping each other, but the problem is that any guest CAN NOT have access to Internet Network configuration in Host machine # ...
1
vote
1answer
505 views

Openstack - Connectivity between instances on 2 separate nodes

I have the following setup: 1 x Management Node (node A) 2 x Compute Nodes (node B & C) 1 x Volume Node (node D) Relevant configurations: VlanManager multi_host=true Node ...
3
votes
2answers
3k views

Debian: Should I add vlan interface into bridge for KVM?

I am setting up a Debian Squeeze box as a KVM host. I want to add multiple interfaces to each KVM guest so I want them to be on different VLANs. After reading about this, I believe the best method is ...
2
votes
1answer
343 views

Virtual bridged networking with VLAN, could not ping

I require a virtual network with VLAN be build between two virtual hosts - which can be (lxc/ vbox -ubuntu or win xp). I tried with lxc and vbox with Ubuntu and was finding difficult to make it work ...
2
votes
1answer
3k views

Assistance with bonding vlans and bridges on Ubuntu 12.04

We're trying to set up four nics in bond0 with 3 tagged vlan's and three bridges for KVM VM's on Ubuntu 12.04. Using the interfaces file below I can manually start and stop networking and get the ...
0
votes
0answers
2k views

ddwrt - multiple wlan each on own vlan - confused

I have a WRT610n running DDWRT v24-sp2. My goal is to setup: Single connection from switch to WRT610n, and switch passes tagged VLAN 50/40 and 1 (untagged) On WRT610n the 3 LAN ports (eth1/2/3) and ...
2
votes
0answers
125 views

dsl router for bridging two lans

I have two office locations that each have DSL service. I have the routers set up so that the two subnets, 10.0.1.x and 10.0.2.x, correctly keep data on each subnet and or pass across to the other ...
1
vote
3answers
357 views

bridge between vlans

We have a somewhat exotic setup. Some devices connected to a cisco switch must be administered by a third party and we don't want to give this third party full access to our network. There devices do ...
1
vote
2answers
929 views

Xen domU needs to be on different network (vlan) than dom0

We have multiple VLANs setup between different sites, and are using them to connect our dev. network, 192.168.3.x, and a management network, 172.16.20.x. I have a Xen dom0 on 192.168.3.x; one of it's ...
2
votes
2answers
1k views

snmpd configuration to enable BRIDGE-MIB or Q-BRIDGE-MIB

All the Ethernet switches and access points on my network provide snmp access to the bridge learn table except for my linux-based bridge. Does net-snmp support exporting the bridge forwarding ...
0
votes
1answer
598 views

Losing unicast traffic with “Input DA reject”

I have a rather complicated issue with an old Cisco 5509 Switch and a few kvm/qemu based virtual machines. First, the setup of the system looks like this: ...
0
votes
1answer
846 views

Linux vlan bridge not working

I try to made vlan-bridge on ubuntu 10.4, because I like to run ebtables on every vlan ports. I create a script to make this job easier: $DEV ="lan.180" # vlan $VDEV ="brlan180" # ...
4
votes
1answer
1k views

Is there a better way to do bonded vlan tagged interfaces with XEN

We have a number of XEN servers all running CentOS or RHEL. The VM's that they run are all required to be on their own VLAN for no other reason than the customer expects them to be. Long story short ...
1
vote
1answer
860 views

Enterprise Linux: VLAN bridges

How do you properly configure vlan bridges on RHEL5 or OEL5? I've tried the following network-scripts, but no packets are recieved on the bridge. If I add an ip address to vlan60 I'm unable to reach ...