Tagged Questions

1
vote
3answers
281 views

Bridging eth0 to wlan0

I'm trying to create the followig setup: +----------+ | Wi-Fi | +----------+ ...
-1
votes
1answer
70 views

Convert wifi to wired using wireless router [closed]

I have a TP-Link WR740N, a Raspberry Pi (With only an ethernet port for Network), and a Wifi connection. Is it possible to use the wireless router to bridge the Pi with the Wifi connection?
1
vote
1answer
67 views

Bridging Networks Between Buildings

I'm trying to set up a WiFi link between two buildings. On one side I've got a regular SoHo (network A) router (Linksys EA4500) and on the other side I've got an Alfa AWUS036H (network B) connected ...
5
votes
3answers
188 views

Creating a network link between 2 very close buildings

I have a charity who have two adjacent medium sized modern detached houses (in the UK): the buildings stand next to each other and are less than 5 metres apart. They have DSL connected to a single ...
2
votes
1answer
127 views

bridging real and virtual wireless network interfaces

I have 2 wireless interfaces, one real (eth1) and one virtual (vt0), running on top of the same physical wireless adapter. Both have separate IP address spaces. eth1 is connected to a laptop, and vt0 ...
2
votes
2answers
694 views

Cannot access LAN Printer

Environment: I have a Brother 7360N Network Printer connected to a TPLINK Router over an Ethernet cable. My desktop, running Windows 8 is connected to the TPLINK Router over an Ethernet cable. A ...
0
votes
2answers
132 views

Wireless bridge settings

Using two TP-Link WA-5210G, I am trying to create a network bridge between two networks, netA and netB. I want to share my internet connection from netA to netB, using the AP from netB. netA :: ...
2
votes
1answer
88 views

Accessing WRT54G admin through WET610N bridge

I am using a WRT54G router to host a few computers and servers. I have another computer that is wired to a wireless bridge, which is a WET610N. How do I access the admin page of my WRT54G through my ...
1
vote
2answers
115 views

Point to Point wireless network

I have to link two offices 0.62 miles apart with a wireless link. So far my setup is as follows : 2 24db directional parabolic wifi antenna 1 watt wifi amplifiers on each antenna Access point on ...
0
votes
3answers
101 views

How is this wireless mode called?

I have the following situation and I don't know how to ask google. I have a cabled LAN segment, lets say 192.168.1.X. One of the nodes there is a wifi router 192.168.1.3 that creates wireless ...
0
votes
1answer
186 views

KVM wireless bridged networking mode not operational

Why does KVM not support wireless bridge networking mode, whereas VirtualBox and do it very well? parprouted doesn't help. I want to allow KVM guests to act as if they have a bridged network ...
2
votes
1answer
711 views

router advertisements do not go through wired/wireless bridge

The full setup: A Netgear CVBG834G cable modem+router (4*Ethernet+WiFi) configured in bridge mode (and WiFi shut down) whose sole role is to serve a public IPv4 address on its LAN port to... an ...
4
votes
3answers
216 views

How strict is line of sight?

The college where I work is wanting to expand our network connection out to the field house building, located about 1/2 to 3/4 mile away from the rest of campus. I'm looking at one of these as a ...
0
votes
1answer
247 views

Cisco 1242 WAP Bridging

I'm looking to connect two facilities with a a pair of Cisco 1242 access points and am looking for advice on configuration. We have multiple VLANs running that will need to be passed through the ...
1
vote
2answers
908 views

Linux: Bridge doesn't forward if interface is WiFi?

I have an Edimax EW-7318USg which comes with an Ralink rt73 and its USB. When trying to bridge (to share internet for example) it doesn't work. But today I tried to do the same with a wired ...
1
vote
1answer
662 views

Best dual band A/B/G/N wireless router/ap for Linux [closed]

I am looking for the best A/B/G/N dual band (simultaneous) router or access point that can be flashed with community firmware like dd-wrt or openwrt. In the past I have used the WRT54G series from ...
0
votes
2answers
441 views

wireless ethernet adapter with EAP-PEAP?

We have a wireless network set up to support WPA or WPA2 with AES or TKIP encryption and EAP-PEAP authentication. Users are wanting to connect devices that don't have the ability to do EAP-PEAP but ...
1
vote
2answers
109 views

Best Zero-Config Powerline or 802.11 Bridge

Need to ship a device to a remote non-technical user for connecting a device that only supports an ethernet cable, and no physical port in the same room. Some of the Linksys devices (Powerline ...
5
votes
6answers
7k views

Networking problems in VMWare with wireless bridge

Barebone data: virtualization: VMWare Workstation 6.5 (latest) Host: Windows Server 2008 x64 Guest: Windows Server 2008 x86 Host network adapter: Ethernet (see comment) Host network adapter: ...