CentOS is a free (as in beer and speech) GNU/Linux distribution that is community driven and based on source code released from RHEL.

learn more… | top users | synonyms

1
vote
1answer
12 views

Is “QUEUE=” in /etc/sysconfig/sendmail the same as the “-q” switch in sendmail?

CentOS 5.x, SendMail 8.14.4 My Sendmail server is currently configured to retry deferred messages every hour. In /etc/sysconfig/sendmail I have the following: DAEMON=yes QUEUE=1h I don't see ...
-1
votes
0answers
21 views

chroot unable to write in home directory

I had a requirement on Centos5 to jail sftp users only to see their home directory during the sftp operations, so I performed the steps narrated in Enabled chroot as follows: section, which eventually ...
1
vote
0answers
55 views

CentOS 5.11: yum installs, but packages remain missing

I'm trying to figure out a very strange problem with yum on a fairly old CentOS 5.11 VPS using DirectAdmin. Executing the following command suggests the telnet package is installed: # yum install ...
0
votes
1answer
48 views

How to alias name for IP Address

I have a website which is hosted in local Server (CentOS 5.x) (Hostname: xxx.yyy.local, IP : 192.168.5.25). I can browse the site typing server ip in the browser from my Local Network. How can I get ...
3
votes
1answer
2k views

sendmail rejecting some connections with handshake failure: SSL alert number 40

My sendmail server on CentOS 5 started to reject some connections with the following message logged: error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure:s3_pkt.c:1092:SSL alert ...
0
votes
0answers
15 views

Centos 5.8 - firewall blocking Virtualizor staff

I run private KVM/OpenVZ hosting and im currently having issues with it. So I opened a ticket with virtualizor and they say they cant access the VNC connections, but I can. I figured the only thing ...
1
vote
2answers
97 views

CentOS 5.5 32 bit “service ntpd restart” issue or not?

I have CentOS 5.5 32 bit. I have a service provider that enables NTP on their routers. They have checked and doubled check their access list and I can ping the time servers but I'm getting a strange ...
0
votes
0answers
66 views

Popped in replacement harddrive in RAID 1 configuration; Seeing I/O but the drive is not recognized by OS or RAID controller

CentOS 5.11; Dell PowerEdge R410; Dell SAS 6/iR Integrated Blades RAID Controller. Have two drives, both in a RAID 1 array. First drive failed. Pulled it out and popped in a new drive (same brand ...
0
votes
0answers
61 views

auditd process stops logging after logrotate script runs

I am trying to use logrotate to keep audit logs for a set period of time rather than using auditd's special rotation (from /etc/audit/auditd.conf). I have changed the max_log_file_action to IGNORE in ...
0
votes
1answer
32 views

yum should error when a package is not available

I recently ran into a bug in a script where I tried to do the following: yum -y install another_package.x86_64 some_package.x86_64 && run_my_script The script ran well on a newer CentOS, ...
0
votes
0answers
28 views

CentOs 5.11 mod_dav_svn update

I've Centos 5.11 with wasn't maintained by anyone. cat /etc/*-release CentOS release 5.11 (Final) And I tried to update svn from 1.4.6 to 1.6.11 using yum. sudo yum update subversion Loaded ...
0
votes
1answer
73 views

Can't connect to MySQL server on '198.211.37.xx'

For last couple of days I have tried many things to solve Can't connect to MySQL server. I would like to describe everything that I did so far. Create a mysql user and GRANT ALL Privileges. Bind ...
0
votes
1answer
42 views

Wrong date/time in dmesg

we have this strange issue. We use perl script for human-readable time-stamp in dmesg (taken from http://linuxaria.com/article/how-to-make-dmesg-timestamp-human-readable) and I also tried this one ( ...
0
votes
1answer
38 views

Can I install subversion client in Centos 5 for offline installation?

My Centos Version is : LSB Version: :core-4.0-ia32:core-4.0-noarch:graphics-4.0-ia32:graphics-4.0-noarch:printing-4.0-ia32:printing-4.0-noarch Distributor ID: CentOS Description: CentOS release ...
3
votes
1answer
277 views

How can I confirm if my vmxnet driver is installed on my CentOS server?

I have an appliance running CentOS 5.x on VMWare ESX. Quite recently I upgraded it to a newer version of CentOS (still in 5.x) and I noticed that the network card wouldn't initialize. If I run ...
0
votes
1answer
39 views

How to tell what is blocking internet (download) on cloud server

Background: My employer is using a cloud-based database server through a service called Rackspace. This server is accessed by our other servers via ssh. Our network admins are unreachable for the next ...
2
votes
1answer
53 views

How would I be able to take a snapshot of a CentOS 5 server and compare it later on?

I have a consultant that was hired to install some custom software to a CentOS 5 server. After she's done, I'd like to review her changes to possibly automate or optimize them. I was thinking of: ...
4
votes
0answers
59 views

date command displays different time

I have one centos 5.8 Linux server. I am experiencing a bit strange issue and figured out it is something with system time. When I check date command, outputs are really strange. Here is example: ...
0
votes
2answers
43 views

Replicating My Production Environment

I have a CentOS production server that I am currently doing my development on (I know this is awful) I'm bringing on some new developers and I want to set up appropriate development, staging and ...
2
votes
2answers
176 views

What would cause ifconfig NIC frame drop counts to increase SLOWLY (90-100 frames per day)?

I have a web appliance running CentOS 5.11. It sees a fair amount of traffic (apologies, I don't have specific numbers but I know it's in use). For some reason, I'm seeing ifconfig error counts ...
1
vote
0answers
40 views

Rollout approach for centOS/RHEL linux servers to achieve centralised authentication through AD

We have 3 environments testing develop and production each having more than 40 Linux servers. Need to establish centralized authentication through AD for all these environment. Which is the best ...
0
votes
1answer
105 views

nfs mount passwordless login

Setup: OS : CentOS5 node 1 : 172.16.1.1 sandbox1.local node 2 : 172.16.1.2 sandbox2.local The nodes have the hostnames in the hots file. Pinging to each other works fine. Problem: My home is ...
0
votes
1answer
107 views

init: Id “2” respawning too fast

I've just updated a CentOS 5.10 box to 5.11 with all the latest patches and rebooted. Following the reboot I'm now getting the below error message every few minutes: init: Id "2" respawning too ...
1
vote
0answers
174 views

200 OK blank page setting up Wordpress on restore test VM

I'm testing a partial backup of a frankly rather outdated (legacy, what can you do?) CentOS/Apache/MySQL/PHP/Wordpress server by restoring to a VM with a fresh copy of the relevant packages. After ...
0
votes
0answers
194 views

vsFTPd - not all connection succed - timeout (Centos)

I'm using Notepad++ ftp plugin to modify files on my server. Every x uploads (like 10 or 20 - its random) my upload starts and does not finish. My FTP server says Timeout. I changed vsFTPd logging ...
0
votes
0answers
168 views

Installing PostgreSQL on Centos 5

I'm following the instructions from here. I try and run yum localinstall http://yum.postgresql.org/9.4/redhat/rhel-5-i386/pgdg-centos94-9.4-1.noarch.rpm which returns the fault cannot open file... ...
0
votes
1answer
80 views

Linux CentOS: A server throws weird error messages, can you speculate why?

There's a server in my company which is part of the production environment. On the server there's an ActiveMQ server running. I logged into the Active-MQ UI and tried to create a new queue. When I ...
0
votes
0answers
120 views

pam_tally is not supporting user locking after failed attempts on CentOS

After adding the below configurations in /etc/pam.d/system-auth. The user account is not getting locked after multiple failed attempts. As per the below configuration the account should be locked ...
0
votes
0answers
114 views

DL160 G5 fails to boot CentOS 5.11

I'm trying to install CentOS 5.11 on DL160 G5, with 4 bays holding 3TB sized drives. The installation with default partition layout completes successfully, however on boot I get to a blinking cursor ...
3
votes
1answer
57 views

Renaming files recursively and moving them inside one single directory

I have a project with 500k users in CentOS. The picture file/directory structure was setup like this (yeah... i know): user/0070/ this is the user ID / 1000, so that all users in the range of ...
0
votes
0answers
111 views

Installing Wireshark 1.6 on CentOS 5.7

I want to install wireshark version which is higher than 1.2 since I need to analyse the iec104 packets (only version higher than 1.2 supports this). I am using CentOS 5.7 version and it only supports ...
0
votes
1answer
65 views

How to config awstats to analyse .php traffics?

By default, awstats group .php traffics into a single Dynamic PHP Script file number. However, the site's pattern lies in route=??? after an index.php?, e.g.: GET ...
-2
votes
1answer
431 views

The requested URL /sot was not found on this server

I have a VPS (Centos 5) and want to use a file in address like this: www.domain.ir/socket.php but after entering the address I see this error: Not Found The requested URL /socket.php was not found ...
0
votes
1answer
393 views

Can RHEL5/CentOS5 be run on Intel Haswell-EP (E5-26XX V3) CPUs?

We need to upgrade the hardware on some of our CentOS 5.11 servers. From Redhat's Intel CPUs and Supported RHEL Versions page, I see that the E5-26XX V2 CPUs are supported. However, the E5-26XX V3 ...
0
votes
1answer
36 views

Linux Centos5 lockup - possibly a memory issue?

Here is an OCR of a screenshot of a VPS hosted Centos5 64 bit Linux server that has just frozen up on me. I have now rebooted this VPS guest but would appreciate it if anyone who understands the ...
1
vote
1answer
193 views

Could not load file or assembly fastcgi-mono-server4

I am trying to host an ASP.NET Web Forms application using Mono. I have installed Mono 3.0.7 and XSP 2.10.2 from source into the /usr/bin directory. I then started the mono server with the following ...
2
votes
2answers
232 views

Intermittent full system hang on VM server running CentOS 5.10

CentOS 5.10 / VMWare ESX 5.1 I've got an older email server running CentOS 5.10 (with SendMail) and it's experiencing intermittent hangs wherein the system becomes completely unresponsive. During ...
2
votes
2answers
2k views

Logstash Forwarder doesn't start up with chkconfig in CentOS 5

I have set up logstash-forwarder on a CentOS 5 machine installing it from this RPM: http://download.elasticsearch.org/logstash-forwarder/packages/logstash-forwarder-0.3.1-1.x86_64.rpm When I went ...
1
vote
1answer
164 views

yum install proftpd error

I used proftpd for years on this year. but I got an error when I update proftpd today. I am using CentOS 5.11. [root@server11 yum.repos.d]# yum install proftpd Dependencies Resolved ...
1
vote
0answers
98 views

Enabling APC cache takes down website

I have a VPS running on centos 5 with 2 GB ram. I run a IP.Board forum on that server. Recently my server was hacked and I had to format the disk and start again. I was using APC cache before and it ...
1
vote
1answer
233 views

HTTP Ports are Filtered on New Virtual IPs in LVS (Linux Virtual Server) Load Balancer

I inherited a Linux Virutal Server (LVS) load balancer on CentOS 5.10. Its been running with no issues for quite some time with no worries. Now when I add a new virutal IP (VIP), all HTTP traffic ...
0
votes
2answers
1k views

Upgrade to latest current installed version of PHP [duplicate]

I've just purchased a new VPS and they've, for some unknown reason, installed PHP version 5.3.3. I'm fine with being on version 5.3.X, but I believe the latest version is 5.3.29. I did some Googling ...
0
votes
2answers
52 views

File permission recursively for all new folders and files that gets created [closed]

I want a folder to have 777 permission and every time a new file or folder gets created inside that should have the same user and group with 777 permission. I tried the following but it does not get ...
3
votes
1answer
2k views

SHA-2 signed SSL certificate crashes apache on startup on CentOS 5.X

In preparation of the warnings that are going to start showing up in browsers when visiting SSL sites with SHA1 signed certificates, I wanted to get all of the certs that I have upgraded. Some of ...
1
vote
1answer
2k views

ShellShock - Unable to update CentOS 5.7

[user@server1 ~]$ wget http://mirror.centos.org/centos-5/5/updates/x86_64/RPMS/bash-3.2-33.el5.1.x86_64.rpm [user@server1 ~]$ sudo rpm -Uvh bash-3.2-33.el5.1.x86_64.rpm warning: ...
3
votes
2answers
7k views

Yum reports updated bash but binary still reports old version

I'm trying to update a CentOS 5 system in order to patch the bash vulnerability described in CVE-2014-6271 / RHSA-2014:1293-1, but am running into an issue. After seemingly-successfully updating bash ...
0
votes
1answer
161 views

Freshly installed CentOS does not boot from Dell's Perc H700 RAID

Installed a fresh CentOS 5.10 installation on RAID5 provided by Perc H700 Integrated RAID, however the system fails to boot. Checked the system via recovery CD, and noticed that CentOS 5.10 now uses ...
1
vote
1answer
877 views

High CPU usage by whois | CentOs 6

I am not a server guy and currently maintaining a small server for my own needs (Development and testing). I got a notification that my Server CPU usuage is around 99% from last 3+ hours.I know that ...
-1
votes
1answer
239 views

Build gcc 4.1.2 from src RPM on a CentOS 5.10 [closed]

I need an advice on how to compile gcc 4.1.2 on a CentOS 5.10. The long story: I've a got a Citrix XenServer Creedence beta 1 up and running OK. It has actually CentOS 5.10 as the dom0. This can be ...
0
votes
0answers
63 views

Filtered port 22 with no firewall settings

I'm trying to connect to an sftp server from a CentOS 5.5 server. The connection is never established. When I run the command: nmap -p 22 -P0 <sftp server address> PORT STATE SERVICE ...