The Cisco PIX line of products were devices that provided firewall and VPN functionality.

learn more… | top users | synonyms (1)

0
votes
1answer
835 views

Juniper SRX1400 VPN

I have been trying to set up a client VPN on a Juniper SRX1400 without much success. All documentation I found from Juniper and elsewhere does a lot of other (difficult and wonderful) things other ...
0
votes
2answers
677 views

Cannot reach LAN clients on pix 501 when VPN is connected

This is becoming rather frustrating. I'm trying to set up a VPN on a pix 501 using Cisco client v5. The connection is established fine but I cannot see the clients on the inside interface of the pix ...
3
votes
2answers
197 views

Programmer configuring a new network [closed]

I'm in the process of expanding my home network from a couple of laptops on a wireless Verizon FiOS router to include: Linksys 24-port switch Cisco Pix 515 Cisco 3640 router One new development ...
0
votes
0answers
24 views

2 Vlans on a Cisco PIX 515 with DMZ

I have to install an application server on a networks dmz. The application will sit on a network but has no interaction with the other devices on that network. I was thinking that the firewall(Cisco ...
0
votes
1answer
1k views

VPN and overlapping subnets

I have a number of Cisco site-to-site VPNs between using ASA and Pix devices established for my clients. This is a hosted application and I need for the entire address range on the client's network to ...
0
votes
5answers
271 views

Are PIX firewalls still supported by Cisco?

I was told by a salesman at a hosting company to be wary of anyone trying to use a PIX firewall in my hosting solution because Cisco doesn't support them anymore or offer security updates. Is that ...
0
votes
1answer
222 views

Older PIX 515e running 8.0(4)28: Can't get internet access to work with DHCP on outside interface

Ok.. I admit it. I am probably missing something simple. A little help? I have an older PIX 515e that I am trying to get running. The outside interface is connected to a cable modem and configured ...
1
vote
1answer
39 views

How can I remove the ACL of PIX firewall?

I'm just trying to how PIX works. Anyway how can I remove the ACL from my GNS3's PIX? PIX-SECU(config)# show access-list access-list cached ACL log flows: total 0, denied 0 (deny-flow-max 4096) ...
3
votes
2answers
110 views

New IP addressing from ISP

We just got a new Internet fiber service. Our ISP gave us a /30 for WAN and /29 for LAN? I have never seen this when setting up a new ISP service. I was always given a block of ip addresses (if ...
0
votes
2answers
284 views

Cisco ASA/PIX Can't Access Internal Resources Behind NAT [duplicate]

My servers are natted 1:1 as follows, i.i.i.i maps to x.x.x.x where i is an internal IP, and x is the external IP. From an i.i.i.i machine, I cannot access x.x.x.x resources... What special ...
0
votes
1answer
159 views

Route being ignored on core Cisco 6500 switch?

This is less likely a bug, and more likely a lack of my own understanding on routing. I am having an asymmetric routing issue where return traffic is going out the wrong firewall. I have an explicit ...
0
votes
1answer
147 views

How do you configure a Lan to Lan VPN on an ASA without using your outside interface IP address?

I have two /28 subnets A & B. My PIX and ASA's outside interface addresses are both in subnet A. I am in the middle of a migration from the PIX to the ASA and need to use the PIX outside ...
0
votes
1answer
180 views

How Do I Access A PIX External Port-Forward From The Inside Network?

I have a PIX running 8.0(3). I've got a port-forward to permit external users to hit a server on my inside network set up as so: static (inside,outside) tcp interface 8080 192.168.168.100 8080 ...
0
votes
2answers
132 views

Cisco PIX 515 ipv6

I know cisco pix 515 is an old and EOL device, but does anyone know if it suppors IPv6 or is that completely out of the question?
1
vote
2answers
138 views

Cisco and HP backups to Spiceworks TFTP occasionally creating .tmp files

We are backing up our ASAs and switches using some scripting. It works very well. I have noticed though, occasionally, the backups to the TFTP will come out not as plain "files" with no extension, ...
-4
votes
2answers
679 views

Hack Cisco Pix 501 to Run Linux [closed]

Can a Cisco Pix 501 be hacked to run Linux with a similar feature set? Is this possible? Has it ever been done? The pix seems like reliable solid-state hardware and it would be cool if I could run ...
1
vote
1answer
46 views

set Cisco Pix back to default settings

Trying to wipe my Cisco pix back to factory default. i login to the pix as an admin then type "configure factory-default" this doesn't work though
3
votes
1answer
1k views

PIX 506E, MTU, VPN Packet Fragmentation and Shoretel IP telephone system

We have two sites, a large Southern site and a small Northern site, that have a VPN between them defined on two Cisco PIX Firewalls. Over this VPN Shoretel IP phone traffic travels as well as all ...
0
votes
2answers
116 views

Working with PIX firewalls [closed]

I have acquired a used Pix firewall. A PIX 506 to use as a firewall for my small home office, the netgear wi-fi was really not cutting it. I'd like to get a pointer on where to start with it, like ...
1
vote
2answers
804 views

Cisco PIX 8.0.4, static address mapping not working?

upgrading a working Pix running 5.3.1 to 8.0.4. The memory/IOS upgrade went fine, but the 8.0.4 configuration is not quite working 100%. The 5.3.1 config on which it was based is working fine. ...
0
votes
0answers
94 views

Cisco Pix does not let traffic pass from outside to inside even though ACL permits

I have tried to make my pix 515 allow traffic from outisde interface to inside, but despite permitting ACL's, it doesn't seem to let traffic through. (It is letting traffic out as it should though) I ...
1
vote
1answer
279 views

Configure Cisco Pix 515 with DMZ and no NAT

I hope that someone could shed some light over my situation, as I am fairly new to PIX configurations. I will be getting a new net for my department, which I am going to configure. At my hands, I ...
1
vote
0answers
84 views

Datacenter redundant hosting setup advice

We are moving our servers to a new DC and I am looking for a bit of advice with our new COLO setup. I have some knowledge of networking but I am an enthusiast more than anything so it gets a bit ...
0
votes
3answers
370 views

Any advice on repairing a faulty power jack on a Cisco PIX 501?

One of my PIX 501 units has a power jack that is fairly sensitive to any movement of the chassis. If I so much as nudge the PIX, the power flow is interrupted and the PIX reboots. I remember reading ...
3
votes
6answers
11k views

Cisco PIX to Juniper Netscreen Policy-based VPN fails Phase 2 Proposal

I've followed the instructions to configure a VPN between a netscreen device and a Cisco PIX as directed by Cisco's [netscreen to PIX ...
1
vote
1answer
618 views

Cisco VPN endpoints disconnecting from a VLAN

I have a number of Cisco ASA 5505 and PIX 506e around the world acting as VPN endpoints. They connect to a Cisco VPN Concentrator 3000 at HQ. I am using Easy VPN to set up the VPN (i.e. most of the ...
1
vote
1answer
252 views

Configuring a PIX to allow SMTP between DMZ and internal network

I have a Web Server (193.170.4.2) in my DMZ that needs to communicate with the our Exchange Server (10.77.51.87) internally via SMTP. I used access-list acl-dmz permit tcp host 193.170.4.2 host ...
2
votes
1answer
315 views

PIX Firewall Causing Packet Loss

I am currently in the process of modifying how internet reaches my front end servers and I am having a strange issue with one of the existing stacks. There is one physical firewall which is above the ...
1
vote
0answers
66 views

Is there a way to have VPNC failover automatically to a second Cisco firewall?

I'm currently using VPNC on my Ubuntu machine to VPN to a remote Cisco firelwall. It's critical for this VPN connection to be up at all time. Is there a way to have VPNC failover automatically to a ...
0
votes
2answers
63 views

Loss of inbound emails from external domains after replacing firewall with new ASA5510

To start, I'd just like to admit my lack of knowledge in setting up/maintaining critical hardware like firewalls and exchange servers. I am the Technology Coordinator for a small charter school and ...
1
vote
1answer
2k views

Can the ASA 5505 use pptp as the VPN type? If so does anyone have a link to a config example?

I'm migrating from a PIX to a ASA and the PIX has the remote users PPTP to it. This is not pass though but the VPN type of the PIX. Does the ASA even support this? I have been trying to search around ...
1
vote
1answer
540 views

Configuring PIX 506 with NAT for multiple public addresses

We are setting up a streaming service to an external client and they need access to an internal workstation along with certain ports open on our firewall. I need to configure two public IP addresses ...
0
votes
1answer
158 views

HTTP traffic through PIX VPN from outside site

I have a remote site with a website that only allows access from the outside IP assigned to our local PIX. I have users connecting to the local networking using a VPN that need to be able to view this ...
0
votes
2answers
327 views

Set up a GRE tunnel with Cisco PIX-506 v6.3

I'm trying to establish one half of a GRE tunnel, the other being configured by my service provider. I have a Cisco PIX-506-E running Firewall version 6.3(5). Provider Router Public IP: 8.8.8.8 My ...
0
votes
0answers
108 views

CISCO - Configuring Application Inspection (Fixup) How to do it for SMTP?

We are getting error in EHLO Command from outside the Router and We are getting 220 ******* kind of message instead of welcome message which is configured in the Mail Server. many suggesting its a ...
0
votes
3answers
576 views

What are tha main causes of slowness on Cisco PIX 515?

A couple of Cisco PIX 515 work in standby mode. But the active PIX (or the otherone) never uses more then 40% of the available bandwidth on the outbound LAN interface (10Mbps).
1
vote
2answers
3k views

Cisco VPN Client dropping connection

Using Windows XP and Cisco VPN client version 5.0.4.xxx to connect to a remote customer site. We are able to establish the connection and start an RDP session, but within 1-2 minutes the connection ...
3
votes
3answers
3k views

What might prevent IKE handshake success in building an IPSEC tunnel?

We use Cisco ASA for our IPSEC VPNs, using the EZVPN method. From time to time we encounter problems where an ISP has made a change to their network and our VPN stops working. Nine times out of ten ...
0
votes
1answer
563 views

Disable VPN on Cisco PIX 506e (v6.3) and configure VPN pass through to a Windows 2003 DC/RRAS

The company I work for has a client that has a Cisco PIX 506e firewall running v6.3. The PIX is currently set up to manage PPTP VPN connections using the local Windows domain controller as a RADIUS ...
0
votes
1answer
273 views

Cisco pix 501 setup with Mcafee

I am way out of my leauge on this but if someone could take the time to help me I would appreciate it. We renewed our Mcafee Saas Protection and I am trying to set up their required ip addresses in ...
0
votes
1answer
227 views

PIX 506E with multiple external /24 subnets

I've got two internet accessible /24 subnets, lets say 11.22.33.0/24 and 44.55.66.0/24 which I want to pass to servers using a private 10.0.0.0/24 subnet behind a PIX 506E e.g. requests to ...
0
votes
2answers
5k views

What does fixup protocol http actually do on a Cisco PIX firewall?

I have a PIX 515E, running PIXOS 6.3, which has fixup protocol http 80 in the configuration. Can anyone point me to documentation that describes exactly what this does to web traffic. Cisco's own ...
1
vote
1answer
226 views

Utilizing two outside internet subnets - routing or physical connection ideas?

I am looking for some ideas on how I might utilize a second 5 internet ip address subnet I have available from my isp. Currently I have the isp cable modem which has 5 ethernet ports on it. It is ...
0
votes
1answer
234 views

Can a CISCO PIX tunnel SCTP traffic over an IPSEC tunnel

Can a cisco PIX 515e tunnel SCTP traffic over an IPSEC tunnel ? I Know that the PIX doesn't support SCTP connection's but SCTP is still IP so i'm hoping the PIX has the capability to route SCTP over ...
2
votes
3answers
206 views

Cisco ASA 5505 to replace a Cisco PIX

Is a Cisco ASA 5505 powerful / capable enough to replace a Cisco PIX 503 ? The PIX runs about 10 site to site VPN's and 40+ individual users on vpn.
1
vote
1answer
2k views

Cisco Pix how to add an additional block of static ip addresses for nat?

I have a pix 501 with 5 static ip addresses. My isp just gave me 5 more. I am trying to figure out how to add the new block and then how to nat/open at least one of them to an inside machine. So ...
0
votes
1answer
398 views

Cisco PIX 515 doesn't seem to be passing traffic through according to static route

Ok, so I am having a spot of bother with a Cisco PIX515, I have posted the current running config below, now I am no cisco expert by any means although I can do basic stuff with them, now I am having ...
0
votes
1answer
69 views

IE halts loading HTML page abruptly, possible network issue

Understanding that my problem could have a very vast scope of possibilities, I'll accept the answer that points me to something that I might have missed. My software's client is facing this issue of ...
-1
votes
1answer
397 views

how to Mitigate UDP flood with PIX

G'day, can any one tell me how to Mitigate UDP flood with PIX cheers
2
votes
1answer
854 views

Convert Site-to-Site VPN from PIX to ASA 8.2

I have been working on converting a config over from a PIX to a ASA 8.2 but I am running into some trouble with the site to site vpn part of it. The PIX has both a client VPN and site to site. Since ...