The tag has no usage guidance.

learn more… | top users | synonyms

2
votes
1answer
47 views

ASA Site-to-Site VPN Failure

We have a series of remote sites connecting to our main site using site-to-site VPN over Cisco 5505s. Every remote site works fine, except one. What is unique about the failing one is that its IP ...
1
vote
0answers
11 views

Cisco ASA l2l tunnel established, can receive pings but cannot reply

I'm a bit new to managing a Cisco ASA appliance and I'm doing my best to learn, however I got a problem here. Long story short, we are trying to connect a hospital's ADT HL7 feed to our remote ...
0
votes
1answer
28 views

Cisco ASDM issue “cannot open device”

I've just gotten my ASA 5510 set up to run AnyConnect VPN (w/ client). Unfortunately, it appears that I broke whatever allows the ASDM to connect in somewhere during that process. I get a "cannot open ...
0
votes
0answers
9 views

Cisco Split Tunnel AND Full Tunnel VPN configuration

I have split tunneling configured on my Cisco ASA 5505 security plus licensed firewall, and I want to know if I can have a split tunnel group and a separate group for full tunnel traffic? Can both be ...
0
votes
0answers
16 views

Cisco Anyconnect + iptables - force all traffic over VPN (and drop all traffic when no VPN connection)

I'm trying to force all traffic over a VPN, and drop every other traffic, just like it was asked and done in this question: iptables - force all traffic over VPN (and drop all traffic when no VPN ...
1
vote
0answers
17 views

Using a Cisco WebVPN with a CDN

We have a set of users who access some of our web applications through WebVPN, however where an application uses resources on a CDN e.g. CSS/JS, the url for the resources is being rewritten by WebVPN ...
0
votes
0answers
33 views

Cisco ASA 5505 Split Tunnel Multiple Networks Not Working

I have an ASA 5505 and cannot get Internet access for VPN users. Config Layout is specified below. ASA (10.15.0.1)-->(10.15.0.2) Core Switch (10.5.1.0) Below is my config. ...
0
votes
0answers
29 views

Unable to ping or RDP to servers via remote access VPN after DNS server change Cisco ASA

We have a setup here were users can remote into our network via VPN and then remote to their desktops. This was all working fine. The other day, we moved DNS from one server to another. I changed ...
0
votes
1answer
22 views

What is the breakdown of all the default IPsec and IKE parameters for the Azure VPN endpoint?

I've asked before concerning how one might troubleshoot a Site-to-Site VPN connection between Azure and a Cisco device (that I don't control), and didn't get useful answers. Now, I'm asking a ...
0
votes
1answer
44 views

How Do I Troubleshoot Azure VPN Without Access to Peer's VPN Device?

I have a rather (relatively) tricky situation: I have to get a VPN tunnel up, between my virtual machines on an Azure subnet and servers behind a telco's VPN gateway. I chose to use the in-built VPN ...
0
votes
1answer
28 views

PPTP + LAN = Maybe?

This has been someone answered in another question but the question was never answered. I've successfully set up a PPTP server at my work, and while I understand the whole point of PPTP is ...
0
votes
0answers
25 views

Amazon EC losing SSH after establishing VPN connection

I have an Amazon EC2 instance with Ubuntu 14.04, where I have a Cisco VPN client installed. I am using Cisco AnyConnect Secure Mobility Client (version 3.1.04072). When I run the VPN client, I can ...
3
votes
0answers
62 views

Stream IPTV through SSL VPN

I have a question about streaming IPTV through Cisco ASA5510 ssl vpn. My current setup at the moment is: Public - firewall (asa5510) - L3 switch - L2 switch But my iptv source feed is coming to L3 ...
1
vote
1answer
34 views

VPN Tunnel Migration

I need to do a VPN tunnel migration from 1 Cisco Asa to another one on 20 remote routers. I wrote a little script that can automaticaly migrate the routers to the new ASA. However, when I run this ...
0
votes
0answers
100 views

DNS Failure From Cisco AnyConnect SSL VPN Subnet

We have three Windows Domain Controllers (2012 R2 and 2008 R2 mix), all DNS servers. Split-zone DNS scenario. DNS resolution is working for all internal subnets except over User VPN. All network ...
0
votes
1answer
21 views

CISCO anyconnect issue with WLAN

When I am connected to internet using WLAN, I am successfully able to connect to VPN using CISCO anyconnect secure mobility client but no traffic passes...please suggest
0
votes
1answer
1k views

Trouble Connecting with Cisco VPN client reason 412

I'm using Windows 8.1 trying to connect to an Office using Cisco VPN. I try to connect and after a few seconds I get this: The Secure VPN connection terminated locally by the client reason 412: ...
1
vote
0answers
23 views

Tethered VPN on Macbook fails to connect, but standard VPN over WiFi works [closed]

I have a MacBook using the Cisco client and it works fine except when I use the special Mac/iPad ability to tether over the iPad data connection. For those that are unfamiliar with this, the Mac and ...
0
votes
0answers
35 views

Use VPNC only for NFS mount

I have a configured and working vpnc connection. I have a configured and working NFS mount. My local computer is the client. The NFS server is remote (in the same rack as the other end of the VPN ...
2
votes
1answer
97 views

What method can I use to manage hundreds of VPNs/Remote Connections to servers outside my network?

Problem We support hundreds of clients and have access to many of their servers via VPN/RDP (SSL VPN, Cisco VPN, MS VPN, etc.). The other kicker to this is we have to be able to let support employees ...
-3
votes
1answer
28 views

Simple to use VPN Firewall [closed]

In my company we use a Cisco ASA 5505 Router with the VPN, Firewall setup, and we route IP and VOIP traffic through it. I can only log into the router from a single computer due to the quirkiness of ...
4
votes
1answer
332 views

Possible to have DHCP hand out different DNS server address when using different tunnel?

We have several ASA 5505 deployed. Currently, we have a setup where the local ASA is answering DHCP queries and is configuring clients with two DNS servers: our DR site DNS server (we use AD) and a ...
0
votes
0answers
123 views

IPSec tunnel between Cisco and openswan

We need to setup a site to site vpn connection and Our provider use Cisco system and we are planing to use openswan on centos (hosted on digitalocean). Our provider asking us following information. ...
1
vote
1answer
252 views

Routing Help Needed - Site to Site VPN

I have successfully established an IPsec Site-to-Site VPN tunnel between our On-Prem network (Gateway, Cisco RV220W) and Azure. However I am hitting a knowledge gap with regards to setting up the ...
1
vote
1answer
92 views

vpn connection is OK but can't route some IPs

Our Network is laid out as in the diagram below PC1 can successfully connect to server 2 (with 10.120.20.x/24), and PC4 can successfully connect to server 1 (with 10.120.30.x/24). Our problem is ...
1
vote
1answer
18 views

Uniting 3 Locations Through VPN

Hello and thanks in advance, My issue is that, at the moment, my company has two locations. We'll call them "A" and "B". I already have them synced using a VPN. We just purchased another building ...
-2
votes
1answer
125 views

Number of simultaneous VPN connections from office limited?

In our office we are several users (ca. 5) that regularly connect to a remote network via VPN. Usually this works fine and has worked fine for years, but recently we have had trouble when more than ...
1
vote
0answers
99 views

vpnc through openvpn failed

I should connect to a Cisco VPN server for example 95.94.66.6, it configured to accepts specified IPs so I launched a server with a registered IP on Cisco which runs an openvpn server. The scenario ...
0
votes
0answers
47 views

How to build a Layer 2 VPN across an uncontrolled network using cisco router?

We have two cisco 871 routers, one is in the datacenter with a fixed ip address, the other is at our office with a changing ip address(dsl with pppoe). How to build a L2 VPN for this scenario? I ...
1
vote
1answer
925 views

Cisco 2901 - IPSec VPN Maxing CPU

We have a Cisco 2901 on the edge of a 100Mbps/100Mbps WAN link which is providing an endpoint for an IPSec VPN to a Juniper SSG 550M. The problem is that we are seeing a max of 'only' 40Mbps over the ...
0
votes
0answers
90 views

Asterisk SIP calls between remote L2L VPN sites

I am running into an issue trying to set up another remote L2L VPN site with VoIP running SIP and Asterisk. Each remote Site (site 1 and site 2) Can talk to the Asterisk server and any phones on the ...
0
votes
0answers
289 views

VPN users stuck on welcome screen then error (RDS)

I run a SBS environment with 2 RDP servers, over the past few months (unable to pinpoint the date/time) my remote (vpn) users are unable to connect to my Remote desktop servers. they get stuck on the ...
0
votes
0answers
242 views

Cisco 887 router as an IKEv2 VPN server?

A follow up to this question. The scenario is exactly the same, but I replaced my 877 router with a 887VA running IOS 15.4. The VPN server configuration works exactly like before, and I can ...
0
votes
1answer
897 views

How to use a VPN Client inside Azure VM and Keep Remote Desktop Connection available?

I have a virtual network in Azure using point-to-site connection. I connect to it using Azure VPN normally and access my VMs through remote desktop normally as well. The problem is, I want to run a ...
0
votes
0answers
276 views

IpSec/Racoon: Packets go to wrong tunnel

I use Debian and Racoon to connect to a Cisco VPN Gateway. We have got two tunnels between the same endpoints. Somehow and sometimes, packets go to the wrong tunnel. This is the log message from the ...
1
vote
0answers
396 views

Cisco RV042 can ping gateway only

I have Cisco RV042 which the problem is can ping gateway only. here my setup : LAN Setting Device, IP address : 172.31.13.254 Netmask : 255.255.255.248 Dual Wan Setting WAN 1 Static IP: IP ...
1
vote
1answer
209 views

VPN Tunnel set up Issues - Cisco WRVS 4400N to Server 2008 R2behind ASA5505

I was wondering if someone could help with a scenario i have that i am not sure how to set up regarding a VPN tunnel set up. I have a Cisco WRVS4400N business router , and on this device , i need to ...
0
votes
1answer
244 views

SQL Server 2005 Linked Server using SSMS from laptop vs RDP

I connect to work network via Cisco VPN from my work laptop, which is on AD. Edit I am using SQL authentication to connect from Server A to B; in scenario #1 I can connect. I can even connect from ...
1
vote
1answer
340 views

How to configure remote IP address audit logging for VPN clients on a Cisco 2801

We have a Cisco 2801 that also acts as a VPN Server for Cisco VPN Client. We would like to configure IP address logging so that each time a user connects using VPN we would like to log his IP Address. ...
3
votes
3answers
13k views

How to troubleshoot Cisco VPN Client Authentication Error 413?

I'm a software developer contractor, and I've been given Cisco VPN access to a customer's network. It's a typical set up, using an RSA SecureID soft token, and I'm successfully able to connect ...
1
vote
2answers
956 views

Sharing Cisco VPN connection with network peers

We have a Windows Seven host with Cisco VPN Client access configured. We want to share this connection with some linux machines. We tried sharing the Lan connection (GUI option), then adding the ...
0
votes
1answer
358 views

WIndows 8.1 VPn stops working

I am having a problem that every day i have to re-install my cisco VPN client because it will not work. I can connect and the routes get published to by computer, but i can not ping anything on the ...
2
votes
1answer
1k views

Cisco QuickVPN Can't view local computers

I am connected to my QuickVPN connection to my RV180 VPN Router and I can access the router via IP but I can't find or see any of the computers. How can I fix that? Do I need to do some more advanced ...
0
votes
0answers
4k views

Tunnel is up but cannot ping directly connected network

We configured a site-to-site VPN and here is the topology. I control the network on the left but not the one on the right. All devices in our network has public IPs. ...
0
votes
1answer
391 views

Cisco ASA 5510 : VPN split tunnel Strange behaviour

I work with a Cisco ASA 5510. I have enabled remote VPN connection with radius Authentication to two different internals networks: 10.1.0.0/16 10.10.0.0/16 from mobile VPN pool 192.168.111.0/24. ...
1
vote
0answers
272 views

Setting up an IPSec VPN with Cisco ASDM

I am trying to set up a VPN remote access with a Cisco ASDM 6.4 for ASA 5505 Version 8.2(5). In order to set up the VPN I followed this steps. After this steps my info look like this: VPN Tunnel ...
0
votes
1answer
233 views

Corrupt file copy Windows 2012 -> VPN -> Windows 2012

I've getting problems copying files from one Windows 2012 server to another via Cisco ASA5505 VPN. I've had a similar setup with Win2008 servers & never saw the problem (same ASA5505 this end) ...
0
votes
0answers
22 views

Making Cisco IPSEC IKE KEY public

I have some OSX users that connect to our Cisco ASA VPN using the built in OSX VPN client. To configure this client I have to provide the Cisco IKE key. I am wanting to know if this key is something I ...
2
votes
2answers
2k views

Cisco VPN client - how to automate vpn process

I use Cisco vpn client to connect some customer Vpnclient.exe required answer about the question “Do you wish to continue” (yes / no ) Is it possible to run the vpnclient.exe without question ? ...
1
vote
1answer
1k views

Cisco VPN and .pcf file

I have few of profiles .pcf files , and I used them in order to automate the vpmclient connection VIA CLI command I have WIN XP server for example vpmclient connect "customor_alpha" ...