Tagged Questions

0
votes
0answers
28 views

Certain sites and services not working whilst connected to VPN [closed]

I'm connected to my works (Cisco) VPN. It's mostly working, but i've noticed a number of things don't work whils connected to the VPN. eg. evernote does not sync gtalk does not work (cant sign in) ...
0
votes
1answer
103 views

Cisco ASA 5505 in small office configuration

I have a small office network that currently consists of about 10 machines, a gigabit switch, and a router/firewall, in a fairly obvious configuration. I need to add a Cisco ASA 5505 to support a VPN ...
3
votes
1answer
298 views

Nmap ping scan over a VPN tunnel return all hosts alive?

I'm curious as to why running an nmap -sP (ping scan) on a remote subnet linked via a Cisco site-to-site IPSec tunnel returns "host up" status for every IP in the range. [root@xt ~]# nmap -sP ...
0
votes
2answers
327 views

Exposing the AnyConnect HTTPS service to outside network

We have a Cisco ASA 5505 with firmware ASA9.0(1) and ASDM 7.0(2). It is configured with a public ip address, and when trying to reach it from the outside by HTTPS for AnyConnect VPN, we get the ...
0
votes
1answer
43 views

Can iOS and Cisco ASA be configured to access nodes (via remote VPN) without a DNS server?

Consider the following configuration where an iPad is used to tunnel into a factory to access a temperature sensor: T <iPad> U | (3G or WIFI) N <internet> N ...
0
votes
1answer
921 views

Setting up QuickVPN clients with a Cisco small office router and getting a message indicating I must change the router's internal addressing scheme

I have a Cisco RV110W small office router (this configuration process is common to many Linksys/Cisco routers) and I am trying to define QuickVPN clients. When add a client of type "QuickVPN" the ...
0
votes
0answers
458 views

Unable to connect to Cisco VPN on wifi, but works on ethernet

I've got a Dell E6400 which can connect to a VPN over both wifi and ethernet, so the VPN itself is fine. When I use a different machine (Dell Latitude E6320), I can connect over ethernet, but it fails ...
0
votes
0answers
70 views

Cisco SA540 only allows 1 user to connect via RADIUS

Running latest firmware (2.1.71). A remote user is connected now, but no further users can connect. I've reset and resynched tokens and PINS and confirmed the users were set up properly in the ...
1
vote
0answers
277 views

Connecting to a Cisco ASA 5510 with Win 7 VPN client

Is it possible to configure a Cisco ASA 5510 to accept a connection from Windows 7 with the built in VPN client software in Win7 ? I know this question has sorta-been asked before on SF but I'm ...
1
vote
0answers
409 views

MAC OS X VPN client / Certificates / Cisco ASA series

I spent a lot of time surfing the web for the solution, but alas, so I finally concluded that this might be an interesting topic to discover. Here's the task: 1. I need to establish VPN connection ...
0
votes
1answer
170 views

share one vpn connection through windows rras with other clients

I'm having a Cisco VPN connection to access our branch office. Since several people using the VPN I'm planing to install the VPN client on one of our server and share it through RRAS to save the ...
1
vote
1answer
89 views

Multi domain wildcard cert on IIS only works when I'm connected via VPN

I have an IIS 7.5 server which, in order to access via Remote Desktop, I have to connect to Cisco VPN It has several with several sites on it e.g. site1 bindings: www.domain1.com, domain1.com ...
0
votes
1answer
484 views

Cisco Anyconnect via OpenVPN tunnel on Windows

I'm trying to connect to a Cisco VPN using an USB-tethered connection using OpenVPN. The moment I enable Cisco AnyConnect, traffic stops on OpenVPN interface, resulting in disconnection. OS is ...
1
vote
1answer
3k views

network is not available even when cisco vpn client is connected. wrong route?

I'm using Vodafone 3G modem. I've disabled other network devices in the system (ethernet, wifi, wimax) turned off firewall and antivirus. cisco vpn client connects successfully but I still can not ...
0
votes
1answer
533 views

How can I stop openconnect from changing /etc/resolv.conf?

When I run openconnect (with the default vpnc script) it changes /etc/resolv.conf and it really shouldn't do that. I am just using the VPN for a few specific host not for a full Internet connection.
0
votes
2answers
177 views

ASA5505 vs server 2008 R2

We have an asa5505 and I am trying to create an IPsec VPN connection so that our users are able to connect to network when they are out of the office. They will be connecting with the vpn connection ...
0
votes
1answer
241 views

Cisco AnyConnect VPN Client drops

I have the Cisco AnyConnect VPN client on a Server2003 std edition. The client will periodically drop and I have to go in and manually reconnect it. Is there a way with to restart the client and ...
0
votes
2answers
789 views

AES Encryption License for ASA series?

I'm trying to set up a VPN and am struggling a little. I've googled some of the lines in the log and someone suggested that to use AES encryption I have to purchase a license from Cisco. Can anyone ...
4
votes
3answers
2k views

Does Windows 7 VPN work with a Cisco ASA 5510

We have a Cisco ASA 5510 router and are trying to get a couple users setup for VPN access. They are running Windows 7 x64 at home and cannot install the VPN client we have for our router (it only ...
2
votes
3answers
2k views

Cisco VPN Client Behind ASA 5505

I'm trying to get connected to another ASA via Cisco VPN Client. I am behind an ASA 5505 myself and I am tryihng to VPN to a 5510. I get the message: Secure VPN Connection terminated locally by the ...
1
vote
2answers
4k views

How to configure Cisco VPNUI shortcut to open a specific host?

How do I configure the Cisco VPNUI client as a shortcut to open a specific host? As far as I can tell, the program doesn't take an command line arguments, or does it? The problem is that the ...
0
votes
2answers
3k views

How do I troubleshoot Mac OS X Cisco IPSec VPN not working over a Samsung Verizon 4G LTE WiFi hotspot?

I have Cisco IPSec VPN (to my employer) configured on my MacBook Air. It works perfectly when I'm at home connected through WiFi to my cable modem (through an Airport Extreme). But when I try to ...
0
votes
1answer
219 views

Cisco 800 Series Routers and dedicated point-to-point VPN

My company is looking for a solution where two branches can be connected securely. The goal is to have the two branches establish a vpn conection (at the router levels) so anything connected beyond ...
0
votes
2answers
3k views

RV082 Gateway-Gateway VPN Won't Connect

I have two RV082's (firmware 2.0.0.7) both with public static IPs. I'm attempting to setup a gateway-gateway vpn between them. My configuration: Router A: Local Security Gateway Type: IP Only IP ...
1
vote
4answers
4k views

Phase 2 Mismatch when connecting Windows 7 to ASA5505 VPN

I'm trying to stand up a new ASA5505 on our network (previously we used IPCop), and I'm having a bit of an issue getting the VPN to work. I ran through the IPSec VPN wizard in ASDM (6.3) on the ASA ...
0
votes
1answer
255 views

Configure Cisco 871W to connect to VyperVPN

How can I configure my Cisco router to router certain traffic (IP or domain-based) through a VyperVPN connection? VyperVPN uses IPSec: http://www.giganews.com/vyprvpn/setup/mac/l2tp.html Sample ...
0
votes
3answers
811 views

Access VirtualBox client (WinXP) from host (Linux) when client is connected to VPN

I have a host (Ubuntu Linux) with VirtualBox on which is installed client (Windows XP). I set bridge connection for them. Host has IP 192.168.0.102 and client 192.168.0.103. On client I've installed ...
0
votes
2answers
408 views

Enable RDP while connected via Cisco VPN

I have a remote win xp machine to which I connect via RDP. When I open a Cisco VPN connection (4.8 client) on that machine, the RDP connection drops because all traffic is routed over the VPN ...
0
votes
2answers
2k views

Giving VPN connections access to all locations?

I have asked a similiar question, but didn't get any answers so i am going to try and rephrase. i have 4 locations corporate and 3 remotes when you are at the corporate location, you have full ...
0
votes
2answers
156 views

is VPN client working one way?

I have centos server and installed the VPN client(cisco-vpnclient) and able to connect to the server on the other side using private address and the server on the other side pingable using the private ...
1
vote
1answer
50 views

How can I associate a specific subnet with a specific certificate with openvpn?

I have a firewall linux box with 4 interfaces: eth0 147.87.107.4 (to the internet) eth1 192.168.11.2 (Employee subnet) eth2 192.168.22.2 (Guest subnet) eth3 192.168.33.2 (Management subnet) And I am ...
1
vote
2answers
504 views

Is it possible to route only part of the traffic through Cisco VPN client?

I have windows Cisco VPN client v5. When I connect, it is cutting my machine from all the network, and I'm virtually in my employers network. Is it possible to send part of the traffic not through the ...
0
votes
1answer
399 views

If I VPN into a network on a VirtualBox guest, is the network traffic of the host also funneled to the VPN network?

I have a machine at my house that runs linux. I use VirtualBox to run an XP host so I can VPN to my workplace. Im curious if the network traffic from the linux host also goes to the VPN network that ...
2
votes
1answer
527 views

Setup Cisco ASAs WebVPN on a different IP Address than the Outside IP

Out customer has a SSL VPN solution called "SSL Explorer", it's a server based application which runs on a DMZ Hosts. Because the Software has been announced to be end-of-life, we want to migrate to ...
0
votes
4answers
301 views

VPN systems for 20 users?

Sorry if this is all rather vague. It feels like any time I try to get anywhere with this, I start to hit brick walls consisting largely of things I don't understand. I'm trying to set up a VPN for ...
1
vote
2answers
5k views

iPad connections to Cisco VPN error — “Enter your user authentication”

Is anyone else having problems with the iPad IPSec (Cisco) VPN configuration? I've configured a Cisco VPN connection to a PIX 501 firewall on a 32GB Wifi Apple iPad. This is done in Settings -> ...
2
votes
1answer
908 views

Cisco ASA - VPN and Hairpinning

We have 2 sites that will be linked by a IPSEC VPN between 2 Cisco ASAs: Site 1 8Mb ADSL Connection Cisco ASA 505 Site 2 2Mb SDSL Connection Cisco ASA 505 Basically, both sites need access to a ...
4
votes
2answers
5k views

How to make iPhone Cisco VPN client work with ASA with certificate authentication

I have an ASA that's providing IPsec VPN services using certificate authentication (no xauth, just the certs). It works perfectly with the Cisco IPsec VPN Client. Now I'm trying to let iPhones ...
5
votes
3answers
7k views

Cisco 877 as a VPN server?

I have a Cisco 877 router which connects my network to the Internet using an ADSL line, a single public IP address and NAT; the IOS version is 15. Everything is working ok, but I'd like to configure ...
1
vote
2answers
763 views

Router for creating site to site VPN to server provider using Cisco ASA 5540

We have dedicated servers hosted for us by a third party, we connect to these over a VPN. My server provider uses Cisco ASA 5540 as VPN devices. Currently we're using software clients on individual ...
1
vote
1answer
3k views

Cisco VPN Connection - No internet no nothing

Sorry if this has been posted, I tried searching but I am not exactly sure what I am looking for, I am a developer not a networking guy. We have a client whom we need to use Cisco VPN client to ...
0
votes
2answers
542 views

How to get a Cisco VPN 3000 config as text?

We would like to get a Cisco VPN device 3000 series configuration as a text file to look at the actual configuration, but apparently the interface is not a CLI but a graphical interface or menu ...
3
votes
1answer
4k views

Multiple Set Peer for VPN Failover

I will have two Cisco routers at Location A serving the same internal networks, and one router in location B. Currently, I have one router in each location with a IPSec site-to-site tunnel connecting ...
0
votes
1answer
1k views

Cannot connect with Cisco VPN but can connect with ShrewSoft VPN

EDIT: We connected an air card to the computer to use a different Internet connection and using the Cisco software, we were able to successfully connect to our VPN server. I just don't understand why ...
1
vote
1answer
842 views

Route traffic on vpn to another interface on an ASA 5510

I have a ASA 5510 that has about 60-70 vpn tunnels. I have four interfaces on the device: 1)External, 2)192.168.1.0, 3)192.168.2.0, 4) 192.168.3.0 A VPN tunnel is configured from the remote site ...
0
votes
3answers
2k views

How to debug Ubuntu/Cisco VPN issues

I'm trying to connect an Ubuntu laptop (9.10) with some kind of Cisco VPN device; I don't know what's on the other end, and I'm not likely to find out exactly what. I know my company allows VPN from ...
1
vote
5answers
3k views

As soon as I connect via VPN I lose internet access

I am currently running Windows 7 32bit. I have both the Cisco VPN client and the Shrew Soft VPN client, both work as expected. The only problem is that I lose connection with the internet so I ...
1
vote
3answers
340 views

cisco vpn client for mac

What Mac application should I use to allow me to connect to Cisco VPN?
1
vote
3answers
607 views

Cisco VPN reset my connection after establishment

I work for a company spited over two sites. Both sites are connected together via a vpn connection with two cisco 850 box. The problem we are facing frequently (often during the morning, just after a ...
1
vote
3answers
1k views

Problem with installing Cisco VPN Client on Windows 7

When attempting to install Cisco VPN version 4.9.01, I am getting the following error: The driver is blocked due to compatibility issues Driver: Deterministic Networks Publisher: Deterministic ...

1 2