The tag has no usage guidance.

learn more… | top users | synonyms

2
votes
1answer
126 views

ASA Site-to-Site VPN Failure

We have a series of remote sites connecting to our main site using site-to-site VPN over Cisco 5505s. Every remote site works fine, except one. What is unique about the failing one is that its IP ...
1
vote
1answer
351 views

Routing Help Needed - Site to Site VPN

I have successfully established an IPsec Site-to-Site VPN tunnel between our On-Prem network (Gateway, Cisco RV220W) and Azure. However I am hitting a knowledge gap with regards to setting up the ...
1
vote
1answer
109 views

vpn connection is OK but can't route some IPs

Our Network is laid out as in the diagram below PC1 can successfully connect to server 2 (with 10.120.20.x/24), and PC4 can successfully connect to server 1 (with 10.120.30.x/24). Our problem is ...
1
vote
1answer
309 views

VPN Tunnel set up Issues - Cisco WRVS 4400N to Server 2008 R2behind ASA5505

I was wondering if someone could help with a scenario i have that i am not sure how to set up regarding a VPN tunnel set up. I have a Cisco WRVS4400N business router , and on this device , i need to ...
1
vote
1answer
145 views

ICS with Cisco AnyConnect - cisco-anyconnect-win-3.0.4235-pre-deploy-k9.msi

I've installed cisco anyconnect VPN (cisco-anyconnect-win-3.0.4235-pre-deploy-k9.msi) on a 64 bit Windows 8 machine. FYI, I do have internet access, while I'm connected to the VPN. I want to share ...
1
vote
1answer
392 views

Connect ADSL modem SMC7904WBRA-N to CISCO RV082

I have a SMC7904WBRA-N ADSL modem/router that connects to the internet with a static IP given by the provider. I've received a RV082 to create a VPN connection which is having problems to connect to ...
1
vote
1answer
2k views

Route IP from one vlan to another vlan in the same vrf of the same router

Can you route a IP (/32) from one vlan to another vlan in the same vrf of the same router ? Exemple: example_router#show version Cisco IOS Software, c7600s72033_rp Software ...
1
vote
1answer
791 views

Replace a Cisco VPN IPSec concentrator with an Ubuntu-box

Is it possible to replace a Cisco VPN IPSec concentrator with Ubuntu and for instance Strongswan? 1) Do Strongswan implement the same protocolls that Cisco uses? 2) Can we retrieve keys from the ...
1
vote
1answer
2k views

Cannot connect with Cisco VPN but can connect with ShrewSoft VPN

EDIT: We connected an air card to the computer to use a different Internet connection and using the Cisco software, we were able to successfully connect to our VPN server. I just don't understand why ...
0
votes
1answer
25 views

Debian as VPN Server for Cisco ASR

I've to set up a Debian Server who should connected by a Cisco ASR via Side2Side VPN with a preshared key. Tried Open-VPN, but found out that both sides need Open-VPN. So the Cisco ASR is the VPN ...
0
votes
1answer
33 views

Routing with Cisco CSR 1000v to Peered VPC

We're attempting to connect our AWS instances with Verizon Wireless via a VPN. Verizon requires the use of a CSR 1000v (versus an AWS-managed VPN connection). I currently have two separate VPCs setup: ...
0
votes
1answer
110 views

Cisco ASDM issue “cannot open device”

I've just gotten my ASA 5510 set up to run AnyConnect VPN (w/ client). Unfortunately, it appears that I broke whatever allows the ASDM to connect in somewhere during that process. I get a "cannot open ...
0
votes
1answer
968 views

How Do I Troubleshoot Azure VPN Without Access to Peer's VPN Device?

I have a rather (relatively) tricky situation: I have to get a VPN tunnel up, between my virtual machines on an Azure subnet and servers behind a telco's VPN gateway. I chose to use the in-built VPN ...
0
votes
1answer
65 views

PPTP + LAN = Maybe?

This has been someone answered in another question but the question was never answered. I've successfully set up a PPTP server at my work, and while I understand the whole point of PPTP is ...
0
votes
1answer
30 views

CISCO anyconnect issue with WLAN

When I am connected to internet using WLAN, I am successfully able to connect to VPN using CISCO anyconnect secure mobility client but no traffic passes...please suggest
0
votes
1answer
280 views

SQL Server 2005 Linked Server using SSMS from laptop vs RDP

I connect to work network via Cisco VPN from my work laptop, which is on AD. Edit I am using SQL authentication to connect from Server A to B; in scenario #1 I can connect. I can even connect from ...
0
votes
1answer
385 views

WIndows 8.1 VPn stops working

I am having a problem that every day i have to re-install my cisco VPN client because it will not work. I can connect and the routes get published to by computer, but i can not ping anything on the ...
0
votes
1answer
516 views

Cisco ASA 5510 : VPN split tunnel Strange behaviour

I work with a Cisco ASA 5510. I have enabled remote VPN connection with radius Authentication to two different internals networks: 10.1.0.0/16 10.10.0.0/16 from mobile VPN pool 192.168.111.0/24. ...
0
votes
1answer
235 views

Cisco pix 515e vpn logs

How do i find list of users that logged into the cisco VPN during particular duration from the cli. i am looking for vpn logs for particular duration because my log server was crashed.
0
votes
1answer
456 views

share one vpn connection through windows rras with other clients

I'm having a Cisco VPN connection to access our branch office. Since several people using the VPN I'm planing to install the VPN client on one of our server and share it through RRAS to save the ...
3
votes
0answers
131 views

Stream IPTV through SSL VPN

I have a question about streaming IPTV through Cisco ASA5510 ssl vpn. My current setup at the moment is: Public - firewall (asa5510) - L3 switch - L2 switch But my iptv source feed is coming to L3 ...
2
votes
0answers
132 views

Running Cisco VPN Client after Windows 10 November Update

I had installed Cisco VPN Client so that I could connect to my client's VPN, and this was working great on Windows 10 (after many hacks) until the Windows 10 November update, which automatically ...
1
vote
0answers
52 views

Cannot Route RDP Traffic Through AWS Site-to-Site VPN

Hi I have establish VPN connection to the AWS VPC, but still there are some routing issues that make RDP connections fail to initiate, because the router WAN IP is differs from the Public IP, lets ...
1
vote
0answers
50 views

Cisco ASA l2l tunnel established, can receive pings but cannot reply

I'm a bit new to managing a Cisco ASA appliance and I'm doing my best to learn, however I got a problem here. Long story short, we are trying to connect a hospital's ADT HL7 feed to our remote ...
1
vote
0answers
20 views

Using a Cisco WebVPN with a CDN

We have a set of users who access some of our web applications through WebVPN, however where an application uses resources on a CDN e.g. CSS/JS, the url for the resources is being rewritten by WebVPN ...
1
vote
0answers
47 views

Amazon EC losing SSH after establishing VPN connection

I have an Amazon EC2 instance with Ubuntu 14.04, where I have a Cisco VPN client installed. I am using Cisco AnyConnect Secure Mobility Client (version 3.1.04072). When I run the VPN client, I can ...
1
vote
0answers
431 views

DNS Failure From Cisco AnyConnect SSL VPN Subnet

We have three Windows Domain Controllers (2012 R2 and 2008 R2 mix), all DNS servers. Split-zone DNS scenario. DNS resolution is working for all internal subnets except over User VPN. All network ...
1
vote
0answers
121 views

vpnc through openvpn failed

I should connect to a Cisco VPN server for example 95.94.66.6, it configured to accepts specified IPs so I launched a server with a registered IP on Cisco which runs an openvpn server. The scenario ...
1
vote
0answers
530 views

Cisco RV042 can ping gateway only

I have Cisco RV042 which the problem is can ping gateway only. here my setup : LAN Setting Device, IP address : 172.31.13.254 Netmask : 255.255.255.248 Dual Wan Setting WAN 1 Static IP: IP ...
1
vote
0answers
330 views

Setting up an IPSec VPN with Cisco ASDM

I am trying to set up a VPN remote access with a Cisco ASDM 6.4 for ASA 5505 Version 8.2(5). In order to set up the VPN I followed this steps. After this steps my info look like this: VPN Tunnel ...
1
vote
0answers
95 views

Adding a Cisco RV084 appliance for site-to-site services in a local area network that I can't change

I have a need to establish a site-to-site vpn connection to a remote office using a Cisco RV084 appliance. We currently are in a shared office environment where our property manager has provided us ...
1
vote
0answers
1k views

ASA 5505 unable to get Lan2Lan and L2TP VPN's working together

I am connecting a remote ASA to a central site with the following settings: Phase 1 IKE: Encryption: DES Authentication: MD5 DH: DH2 Phase 2: Encryption: DES Authentication: MD5 I was getting the ...
1
vote
0answers
77 views

Is there a way to have VPNC failover automatically to a second Cisco firewall?

I'm currently using VPNC on my Ubuntu machine to VPN to a remote Cisco firelwall. It's critical for this VPN connection to be up at all time. Is there a way to have VPNC failover automatically to a ...
1
vote
0answers
710 views

Connecting to a Cisco ASA 5510 with Win 7 VPN client

Is it possible to configure a Cisco ASA 5510 to accept a connection from Windows 7 with the built in VPN client software in Win7 ? I know this question has sorta-been asked before on SF but I'm ...
1
vote
0answers
733 views

MAC OS X VPN client / Certificates / Cisco ASA series

I spent a lot of time surfing the web for the solution, but alas, so I finally concluded that this might be an interesting topic to discover. Here's the task: 1. I need to establish VPN connection ...
0
votes
0answers
23 views

Can't connect Cisco 2621 to AWS EC2 Openswan site to site vpn

I am configuring Site-to-Site vpn between my home Cisco 2621 router and Amazon EC2 instance running openswan. I keep on getting the following message on the openswan server: " NO_PROPOSAL_CHOSEN " My ...
0
votes
0answers
33 views

how to assign static ip address with mac binding in cisco easy vpn?

I have cisco 1941 router with easy vpn configured, Below is the configuration crypto isakmp client configuration group blabla key ********* dns 192.168.0.76 domain example.com ...
0
votes
0answers
84 views

Cannot connect to a Client VPN from a MacOs Mavericks workstation

I have set a Client to Gateway VPN on a Cisco RV325 router. I can connect with Windows 7 integrated client but can't get it work on my Mac. I've tried all the options available to connect a VPN and ...
0
votes
0answers
18 views

Can't change Cisco ASA Easy VPN Server Address - no changes were made

I am trying to update an Easy VPN Server address (it is changing) via ASDM, however when I enter the new address and click Apply it says No changes were made. Any ideas how I can change this please? ...
0
votes
0answers
17 views

IP Routing for VPN Failover on ASA - Did I miss anything? Is there another method?

To handle the 4x VPNs I plan to use the following scenario for Routing: Prefered Order for VPN connection: ISP1<-->ISP3 ISP1<-->ISP4 ISP2<-->ISP3 ISP2<-->ISP4 Example Site ...
0
votes
0answers
122 views

Pinging across VPN tunnel

I have built a VPN tunnel between an Azure virtual network and Cisco 881 router. I have a virtual machine sitting on the Azure virtual network, but the router isn't able to ping the virtual machine. ...
0
votes
0answers
116 views

VPN cisco any connect on linux

I installed on my Linux red-hat machine the VPN any connect version 3.1.03103 when I am trying to connect the customer IP - 192.7.8.67 VIA port 8080 I get the following error: what is actually I ...
0
votes
0answers
60 views

The proper way to create a VPN tunnel with one static host and one dynamic host

Note: I have never attempted this before trying today but I knew it was possible due to research online. So I gave it a try and got it to work... I have one static host (let's call it HOST_S) which ...
0
votes
0answers
78 views

Cisco Split Tunnel AND Full Tunnel VPN configuration

I have split tunneling configured on my Cisco ASA 5505 security plus licensed firewall, and I want to know if I can have a split tunnel group and a separate group for full tunnel traffic? Can both be ...
0
votes
0answers
116 views

Cisco Anyconnect + iptables - force all traffic over VPN (and drop all traffic when no VPN connection)

I'm trying to force all traffic over a VPN, and drop every other traffic, just like it was asked and done in this question: iptables - force all traffic over VPN (and drop all traffic when no VPN ...
0
votes
0answers
129 views

Cisco ASA 5505 Split Tunnel Multiple Networks Not Working

I have an ASA 5505 and cannot get Internet access for VPN users. Config Layout is specified below. ASA (10.15.0.1)-->(10.15.0.2) Core Switch (10.5.1.0) Below is my config. ...
0
votes
0answers
109 views

Unable to ping or RDP to servers via remote access VPN after DNS server change Cisco ASA

We have a setup here were users can remote into our network via VPN and then remote to their desktops. This was all working fine. The other day, we moved DNS from one server to another. I changed ...
0
votes
0answers
49 views

How to build a Layer 2 VPN across an uncontrolled network using cisco router?

We have two cisco 871 routers, one is in the datacenter with a fixed ip address, the other is at our office with a changing ip address(dsl with pppoe). How to build a L2 VPN for this scenario? I ...
0
votes
0answers
371 views

IpSec/Racoon: Packets go to wrong tunnel

I use Debian and Racoon to connect to a Cisco VPN Gateway. We have got two tunnels between the same endpoints. Somehow and sometimes, packets go to the wrong tunnel. This is the log message from the ...
0
votes
0answers
5k views

Tunnel is up but cannot ping directly connected network

We configured a site-to-site VPN and here is the topology. I control the network on the left but not the one on the right. All devices in our network has public IPs. ...