I had a mirrored array with 2 * 1TB drives. I have replaced both drives (one at a time and allowed it to rebuid) with 2 * 2TB drive. So I now have a capacity of 2TB rather than 1TB. However, the array ...
My ProLiant ML350 G3 Tower server's system board has gone bad after it had an inch of its lower edge in rain water. I have a SCSI controller Smart Array 532 with six (36GBx3 and 146GBx3) under RAID5 ...
Have just had a new HP DL380 G6 server set up. This has a SmartArray P410i controller and seven 2.5" 146Gb SAS 10k RPM disks, configured as three RAID1 arrays and a floating hot spare. Problem: I ...