[tag:debian] is a popular Linux distribution. Squeeze is also known as version 6.0.

learn more… | top users | synonyms (2)

0
votes
0answers
22 views

Why might debian become unresponsive with virtually 0% CPU usage?

We have a problem with one of our (virtual) Debian servers failing in a strange way. The server will stop responding to to the network (no SSH, no Ping response, no app response). The only way we ...
0
votes
1answer
26 views

flushed IPs by mistake on UNIX how to recover from rescue

I got a problem. OS: Linux Debian 6.0 64-Bit I used this command on my root-server: ip addr flush dev eth0 I added some month agp multiply IP's and that in a false format. The problem is since i ...
1
vote
1answer
56 views

Debian mirror is out of control

I've inherited a system (Debian Squeeze) that has a Debian mirror set up within it, which is something I have basically no experience with. The problem with it is, it has completely filled up it's ...
1
vote
2answers
46 views

PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525/apc.so'

I have updated my php from 5.3.3 to 5.4.31. I have a Debian 6 Squeeze. PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525/apc.so' - /usr/lib/php5/20100525/apc.so: ...
0
votes
0answers
19 views

Squid limit all user to 128kbit/s

I have a very odd behaviour with my squid server. It limits every client to a bitrate of exactly 3,2 Mbit/s... To troubleshoot it, I've tried to set the bitrate limit to unlimited and to 128kbit/s ...
0
votes
1answer
29 views

how to restrict access to all .txt file in apache except robots.txt?

I am configuring apache2 on debian and would like to allow only robots.txt to be accessed for searching engines, while other .txt files are restricted, I tried to add the followings to .htaccess but ...
0
votes
0answers
13 views

dnsmasq fails a few seconds, then get back to normal (debian)

I am running a box with debian 6.0.8, and DNSMasq 2.55 (from Debian repository). I use it to resolve some local hostnames, and it mostly works fine. but some times, it will fail to answer requests ...
1
vote
0answers
34 views

Keepalived configurations

I installed keepalived on two firewalls to provide fail over. I'm not sure if the following configurations are correct (see configurations below). Sometimes I have problems to reach the websites ...
3
votes
0answers
37 views

Cannot set ACL on ACL-enabled EXT4 partition

I am trying to enable xattrs and acls on a Debian machine. I've (re)mounted the partition in question with user_xattr and acl. (/dev/md3 is the partition in question) root@fs01:/# mount | grep ...
0
votes
0answers
28 views

Debian 6: apt-get gets packages from stable?

I recently started working on a website project for a company that has their own server setup. It's a Debian system, and after a while I noticed ntp wasn't installed and the server was losing time. ...
1
vote
1answer
159 views

mongod service not starting

I've installed mongodb in Debian Squeeze using this guide (guide here) Installed successfully. It was running well until I restarted the machine (using command "reboot"); After restart, mongodb is ...
0
votes
0answers
48 views

Embedding a browser in a 32bit Java/SWT/GTK application on 64bit linux

I have created a Java Application that uses SWT 3.6 and now I want to use the browser widget on a 64bit Debian 6.0 system while using a 32bit Java JRE and the 32 bit SWT/GTK libraries. I didn't feel ...
0
votes
1answer
94 views

phpmyadmin have unmet dependencies

I use debian 6.0.6, before I install phpmyadmin, I install this: apt-get update && apt-get -y install apache2 apache2-doc autoconf automake \ bison ca-certificates ethtool flex g++ gcc ...
0
votes
0answers
41 views

Process specific ulimit still low after changes to soft and hard ulimits

I'm having trouble with increasing the open-files ulimit (ulimit -n) for a particular process on a Debian 6 server. AFAIK I've done everything to change the servers hard and soft limits in this case, ...
0
votes
1answer
106 views

Segmentation fault using group add

Today I tried to install a tftp server to setup a PXE server on a virtual machine (powered by VMware ESX 4) for our network to ease server installation. The base installation (Debian 7.5.0 x64) worked ...
1
vote
1answer
53 views

MongoDB Mergelist error in Debian 6.0.9

We installed Ubiquiti UniFi 2.4.6 which installs Mongodb 10gen on Debian Squeeze 6.0.9. This was a clean install, with no other packages installed from the base install (other than SSH). I was able ...
0
votes
1answer
35 views

Finding the origin of a package not from an official repository?

I have couchdb 1.1.0-1 install on Debian Squeeze. According to debian this is not one of their official versions. So I tried: apt-cache policy couchdb couchdb: Installed: 1.1.0-1 Candidate: ...
0
votes
0answers
91 views

Cant set permission on NFS files through Windows client and Samba4 AD

Hello: First Excuse, my language is not English. Maybe they can help me with this problem. I have an old infrastructure with Samba2 Domain server. And another nfs server disk, connected and ...
1
vote
0answers
19 views

How can I get AWstats to segregate data for two different VirtualHosts/domains?

I want stats for two sites to be displayed separately in their AWstats page on a Debian squeeze VPS. Right now the two sites have their own *.conf files with separate VirtualHosts, and their ...
0
votes
1answer
143 views

dget complains that public key not found

I'm trying to backport a package, but dget (dscverify) says that it can't check the signature because of public key not being found: [root ~/build/openssl] dget -x ...
0
votes
2answers
57 views

Linux server updating requirements [duplicate]

I am new in my company and since a week I discovered that the company linux server contains a virus..tying to figure out what is the cause of the virus infection I noticed that the server is not up to ...
0
votes
0answers
156 views

Squid 3 - NetFilterInterception in cache.log

EDIT: after a day or so, it started happening again and I had to disable iptables for now cause everyone in the family was having no internet. I route all web traffic from my router (10.0.0.1) to my ...
0
votes
2answers
82 views

associating HP MSA2000 G3 to a virtual machine on windows server 2012 DC

Basically i wanted to have a Debian Squeeze associated to the SAN HP MSA200 G3 but due to lack of support i have now planned to deploy Windows Server 2012 Data-center on 2xHP Proliant DL380p G7 ...
0
votes
0answers
23 views

How to configure HP MSA20000 G3 on a HP Proliant DL380p G7 Server on debian squeeze

I have configured a HP MSA2000 G3 attached over fiber channel to HP DL380 G7 servers and have configured it initially over Microsoft Server 2012 Standard edition and have set the identifiers and ...
0
votes
1answer
116 views

L2TP VPN Connection on Debian Squeeze

I need to make an L2TP VPN connection from a Debian Squeeze server. What I have is: The server IP address Shared Key My username and password Just using these 3 parameteres I can establish the ...
0
votes
1answer
254 views

Apache2 + mod_fcgid + php stopped working after upgrade from Debian squeeze to wheezy

I've updated my server from Debian squeeze to Debian wheezy. On this server are several apache2 vhost which running php via mod_fcgid (I'm also using mod_suexec but this shouldn't be the problem). ...
0
votes
1answer
45 views

IPTables cannot resolve dns [closed]

I'm running Debian 6 32Bit I finally just setup my iptables, but I cannot seem to connect to any external server from my box -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m tcp --dport 443 -j ACCEPT -A ...
0
votes
2answers
177 views

Connection timeouts when connecting to localhost / 127.0.0.1

I have a Debian Squeeze dedicated server which hosts 4 front-end websites, and several back-office tools and APIs (which feed into the main websites). This has all been up and running since 2008 ...
0
votes
1answer
64 views

Error at partitioning disk

I am struggling to install debian squeeze (64 bit) OS in the system which is having RAID 1. While partitioning the drive, It says an error Operation not permitted during write on /dev/md126 . I am ...
0
votes
1answer
28 views

I need to set up mail forwarding on debian server

I have a new Debian squeeze VPS with which I'm using to serve a couple of web sites. I have an email address me@mydomain.com that I would like to redirect to me@gmail.com. Can I install some script ...
1
vote
1answer
90 views

Hard disk is detecting as read only

I am installing Debian Squeeze 2.6.32 64 bit OS in IBM System x3250 M4. This system is already having built in RAID. After enable the RAID, I have started to install the Debian Squeeze 2.6.32 64 bit ...
0
votes
1answer
71 views

Wake up a remote computer connected behind a router [closed]

I want to switch on a remote computer running debian linux connected behind a wireless router through LAN with my laptop which is connected to the router over a wireless connection. I have wakeonlan ...
0
votes
0answers
1k views

Upgrading Apache2 to 2.4

I m upgrading apache from 2.2 to 2.4 and I tried the following. nano /etc/apt/sources.list deb http://ftp.debian.org/debian/ experimental main (added to sources list) apt-get update apt-get -t ...
0
votes
1answer
96 views

ext4 production ready on kernel 2.6.32 (debian6)?

I've to maintain a production system on debian6 (kernel version 2.6.32). I'd like to use ext4 on a ssd disk (and generally hope to improve performance upgrading from ext3). I can't find any reference ...
0
votes
1answer
433 views

Update Apache2 to 2.4 on Debian 6

I just updated my PHP to latest version using dotdeb deb http://packages.dotdeb.org squeeze all deb-src http://packages.dotdeb.org squeeze all Is there anything like dotdeb repositories for apache2 ...
0
votes
0answers
92 views

How to get IPv6 working on a Debian 6 server

I m getting two IPv6 from my vps provider but they are not working at all. I can ping ping6 ipv6.google.com My interface looks like this: ifconfig eth0 eth0 Link encap:Ethernet HWaddr ...
0
votes
1answer
109 views

Can't open /usr/share/debconf/confmodule - When install using apt-get

I tried installing valgrind using, apt-get install valgrind After downloading the packages, am getting the following error, Setting up tzdata (2013d-0squeeze1) ... .: 9: Can't open ...
1
vote
2answers
151 views

Nested RAID (RAID0 in RAID1) fails on bootup [closed]

I built a RAID setup with three drives, two 1.5 TB (sdb and sdd) and one 3TB (sdc). My approach is to combine the two 1.5 TB drives into a RAID0 drive (md3), and create a RAID1 mirror (md2) with the ...
0
votes
2answers
172 views

bash script to create user then create ssh keys

Please note I am a total linux newbie, please bare that in mind when answering this question as I have very limited knowledge of linux. OS: Debian Squeeze I am using ZSH and have created a function ...
2
votes
0answers
203 views

mdadm error: found two disks with the number 0

Im running a server deep in the forest , and after a hard disco failure i got this error. error: found two disks with the number 0. It a server with 2, 1 TB disc in raid 1 with mdadm 0.9 SDA failed ...
0
votes
1answer
396 views

OpenLdap: Why slapd tell me there's no DB_CONFIG when there is one

When I run slapcat or restart slapd on Debian 6, OpenLdap 2.4.23-7.32.4.23-7.3, I see this warning: hdb_db_open: warning - no DB_CONFIG file found in directory /var/lib/ldap: (14). Expect poor ...
2
votes
1answer
26 views

Squeeze/Lenny compilation : Library Link error [closed]

I've got a problem here : I have a C++ Library ("DataTsBroad") and a C++ Test app ("DataTsBroadTest"), to test it. Actually, the Lib and the Test app are both compiled an a Debian Lenny. Now, i ...
0
votes
0answers
142 views

Recompile PHP5.3 with mysqlnd on Debian Squeeze?

My current PHP5.3 installation was compiled with libmysql by default. To run certain mysqli functions, I need the mysqlnd library, but I can't seem to find a step by step guide giving proper ...
0
votes
1answer
1k views

ifdown interface not configured (Debian 6) [duplicate]

My server is dedicated (non-virtual). I want to have 3+1 static IPs. I used aliases (eth0:0, eth0:1) previously, but read that this method is deprecated. So I added another IP and reconfigured my ...
1
vote
1answer
296 views

How to see the olddir after mount --bind olddir newdir?

In my debian 7: $ pwd /home/freestyler $ mkdir old new # mount --bind old new then $ mount /dev/cciss/c0d0p9 on /home/freestyler/new type ...
1
vote
1answer
319 views

Can not install postfix on Debian squeeze

I have this weird issue: apt-get or aptitude are not able to install postfix. each time I get this error: # apt-get install postfix Reading package lists... Done Building dependency tree ...
0
votes
0answers
85 views

executing scripts DPkg::Pre-Invoke 'mount -o remount,exec /tmp'

Im getting this error below when I try to run apt-get install php-pear in a VPS. E: Problem executing scripts DPkg::Pre-Invoke 'mount -o remount,exec /tmp' E: Sub-process returned an error code Any ...
0
votes
1answer
107 views

XEN configuration on dedicated server at 1&1

I am just trying to install first time VPS on my dedicated server from 1&1 (12HT CPU, 30 GB RAM). The dom0 is using DHCP to get it's network configuration with ip 87.106.73.113 on eth0. I have ...
0
votes
2answers
165 views

How to downgrade nginx on Debian?

Since file upload module exited in nginx 1.2.1 but omitted since 1.3.x, I'd like to downgrade current nginx 1.4.2 on Debian squeeze to 1.2.1, so that I can easily have the module. I am wondering what ...
0
votes
1answer
329 views

Slow http responses

I am running an apache web server on debian 6.0 with kernel 2.6.32-5-amd64. In certain times of the day, usually when more people are online, the server have very slow responses. I am sure, that is ...