Questions tagged [debian-wheezy]

Debian is a popular Linux distribution. The codename Wheezy stands for version 7.0 which is now EOL. It was released on 2013-05-04.

Filter by
Sorted by
Tagged with
2 votes
2 answers
2k views

DNSSEC key-file not found

This is actually a follow-up on my previous question (my problem was solved) it can be found here: DNSSEC sign-zone results in fatal failure However, I still want to use dnssec-signzone when creating ...
2 votes
1 answer
5k views

"RTNETLINK answers: File exists" after upgrading to Debian 7

I upgraded my system from Debian 6 to Debian 7.3 yesterday. After rebooting, I chose the new kernel linux-image-3.2.0-4-amd64 and the network became unavailable. I tried sudo service networking ...
1 vote
1 answer
5k views

putty openssh rsa key signature invalid

I'm running a server with Debian Linux 3.2.46-1+deb7u1 with OpenSSH Server 6.0 and secured the login with a 2048 bit RSA key. Although connecting with OpenSSH Client from another machine succeeds, ...
3 votes
1 answer
970 views

Resume from suspend/hibernation on LAN activity

I have Debian Wheezy 7.2 running on a HP Thin Client. This little box acts as a file server and is only used from time to time, so I don't want it to run 24/7 but it has to be available when it's ...
2 votes
2 answers
12k views

Postfix cannot authenticate against SASL

My system is Debian 7 aka Wheezy with postfix, courier, and mysql installed. Courier works well and if I issue testsaslauthd -u user@domain -p password -f /var/spool/postfix/var/run/saslauthd/mux -s ...
5 votes
2 answers
17k views

How to install Arial font or any true type font in Debian Wheezy?

I have a web page deployed in server linux (Wheezy server version) and this web page generate a PDF file using a Arial font. I've looked at: /usr/share/fonts/truetype/ and there is no Arial font ...
1 vote
1 answer
2k views

How to update the GPG keyring on a Debian Wheezy server

I am trying to setup a Dockerized Wheezy for some development which production servers are still on this old unmaintained Debian version. The main problem I get is with checking the GPG signatures of ...
1 vote
1 answer
8k views

ISC DHCP Server listening on virtual interface

I've got an ISC DHCP server 4.2.2 (Debian Wheezy) working. I need to add a second scope for unknown clients that gives them a bogus address (mostly for troubleshooting purposes). However, nothing I ...
21 votes
3 answers
15k views

Adding a whole IPv6 /64 block to an network interface on debian

I tried adding a whole IPv6 (/64) block to an interface using ip route add local 2001:41d0:2:ad64::/64 dev lo like described here on my Debian server, but I seem to be missing something. If I ping ...
6 votes
3 answers
17k views

500 OOPS: SSL: cannot load RSA private key vsftpd

I'm configuring vsfptd on debian 7.3, I'm trying to use ssl. I generate the certficates using this command: openssl req -x509 -nodes -days 1925 -newkey rsa:2048 -keyout /etc/vsftpd/private/vsftpd2....
4 votes
5 answers
57k views

Make PHP-FPM Listen at 'IPAddress:Port' Instead of '/var/run/php5-fpm.sock;'

As I was load testing my site today (using blitz.io); despite lots of RAM (more than 50%) and CPU power (over 70%) available, results showed that my site started timing out at a certain number of ...
2 votes
1 answer
2k views

grub on debian wheezy doesn't recognise mdraid

We're having a really strange problem when trying to boot from an mdraid on Debian Wheezy. All references online that I can find tell me that grub 1.99 (which is part of Debian Wheezy) should have no ...
0 votes
2 answers
2k views

Debian Wheezy No longer booting. Freezes after setting kernel variables

My Debian (Wheezy) server has been running smoothly for a very long time with no indications of any problems. I had it running 24/7 so it was always on. The other day my power went out and when I ...
1 vote
1 answer
2k views

SSH key login not working

i am having some problems logging in to one server to SSH via a key this is the client output: ssh '[email protected]' -p 2201 -v OpenSSH_6.0p1 Debian-4, OpenSSL 1.0.1e 11 Feb 2013 debug1: Reading ...
5 votes
4 answers
11k views

PostgreSQL failed to start. unable to load private key file << server.key >> : key values mismatch

I am trying to install PostgreSQL on my Linux Debian 7.2 server but it fails. this is what I did : user ~ $ sudo apt-get install postgresql Lecture des listes de paquets... Fait Construction de l'...
20 votes
3 answers
49k views

wheezy-updates on archive.debian.org returns 404 Not Found

I have an old test machine on Debian Wheezy that I can't really update right now. Debian Wheezy repositories were archived in February. So I want ahead, and updated my /etc/apt/sources.list from deb ...
5 votes
1 answer
8k views

How to install Oracle Java on Debian Wheezy with make-jpkg and fakeroot without errors?

How to install Oracle Java on Debian Wheezy with make-jpkg and fakeroot? the manual for installing oracle java on debian wheezy is quite clear and understandable: http://wiki.debian.org/JavaPackage ...
0 votes
1 answer
3k views

Install a pecl package (gmagick) without PHPize

I am running Debian Wheezy with PHP5.5 (not the default PHP version of Wheezy). I want to install gmagick (already installed graphicsmagick from aptitude). So I did this command line : pecl install ...
0 votes
1 answer
2k views

PowerDNS not listening

I just migrated from Bind9 to PowerDNS on my Debian 7 x86_64, and now DNS requests are not going through. I am not familiar with PowerDNS config files, but I did go into pdns.local and specified local-...
0 votes
1 answer
3k views

squid block domain transparent

How to block domain with transparent on Debian Squid? http_port 3128 transparent but I still have to set the manual proxy on the browser. NB: I'm using Debian Wheezy with squid 2.7
0 votes
2 answers
2k views

Empty /var/log/btmp file - Doesn't fill when a bad login occurs

I'm on a VPS which runs Debian 7.0 64bits. And my problem is that all the SSH attempts of connection which failed doesn't appear on my /var/log/btmp file. So when I do : sudo lastb It (only) prints ...
0 votes
1 answer
1k views

Configuring Exim to relay messages to an Office 365 server in Debian

Our company recently migrated from an on-site exchange server to Office 365. As a result of this, I need to update our proxy server to relay emails generated by our applications to Office 365. We are ...
1 vote
1 answer
1k views

Apache2 / debian wheezy serving only default virtual host

I have seen all other questions around this topic, but none of the answers have worked. Situation: VPS on 1 IP, debian wheezy 7 running with apache2. Even simple virtualhost will not work, as named ...
6 votes
3 answers
22k views

fusermount: fuse device not found, try 'modprobe fuse' first

I am running an instance on gcloud compute engine. I need to mount a Google storage bucket (which belongs to a different project) to my instance. The instance runs on Debian Wheezy. I have installed ...
0 votes
1 answer
2k views

Nginx failed to start on boot: "Cannot assign requested address"

When I reboot my server (not nginx, the whole server), Nginx fails to start automatically. After I logged into the server, I can start nginx manually (service nginx start). It works. But if I restart ...
12 votes
7 answers
116k views

Connection refused HTTPS on Apache

I'm currently trying out HTTPS on one of my sites, and I got a trial certificate from a trusted CA. I've gone through the following checklist: Copied all the cert files according to the CA's ...
0 votes
1 answer
70 views

Debian web access apache2 for mail server

i am responsible for my mail server i am new to Debian and mail server aswell i am facing issue after install the ssl certificate the page still shows http:// not https:// i use to see this command ...
3 votes
1 answer
18k views

E: Package 'libapache2-mod-fastcgi' has no installation candidate --- Debian Server

apt-get install libapache2-mod-fastcgi Reading package lists... Done Building dependency tree Reading state information... Done Package libapache2-mod-fastcgi is not available, but is referred to by ...
4 votes
2 answers
2k views

Install package from oldstable (wheezy) to stable (jessie)

I want to install the package which is missing in jessie from wheezy. It is like backport the other way. I need gcc-4.7, but jessie provides only gcc-4.9. Unstable provides gcc-4.7 only for arm ...
1 vote
2 answers
5k views

RKHunter reported processes that are using deleted files or are listening on the network

I ran Rootkit Hunter 1.4.0 on a Debian Wheezy server and I am confused by the output. I enabled every tests using the following piece of configuration: ENABLE_TESTS="all" DISABLE_TESTS="none" The ...
4 votes
1 answer
2k views

Download speed low over http but Iperf is showing a high bandwidth

I was trying to download some files off of a server that I recently started renting. It is a dedicated server located in Paris-FR. I believe the box is in online.net's datacenter. I am renting it from ...
0 votes
1 answer
71 views

Conflict with Debian version

On a server I set up a few years ago, typing cat /etc/lsb-release gives me the following result: DISTRIB_RELEASE=7 DISTRIB_CODENAME= DISTRIB_DESCRIPTION= And lsb_release -a displays: Distributor ID: ...
2 votes
1 answer
643 views

mysqladmin not waiting for full shutdown (or debian init.d script broken?)

I'm running Percona MySQL server 5.6 (from packages) on debian wheezy (same behavior on jessie). Unfortunately I always get this: # service mysql stop [FAIL] Stopping MySQL (Percona Server): mysqld ...
0 votes
1 answer
1k views

SSLv2_server_method apache php5 error

I tried to load the php module in my apache server and this error came up httpd: Syntax error on line 152 of /usr/local/apache/conf/httpd.conf: Cannot load modules/libphp5.so into server: /usr/local/...
1 vote
1 answer
2k views

Exim4 panic log: "Failed to get user name for uid 1001"

I have a router which delivers mail to certain domains into a MailDir for the domain, and uses a domain:user map to give file ownership to the right user. The problem is that since updating the uid ...
12 votes
3 answers
69k views

apache2ctl: 87: ulimit: error setting limit (Operation not permitted)

The server is running fine -- or at least it seems to -- but there's always the following error: apache2/usr/sbin/apache2ctl: 87: ulimit: error setting limit (Operation not permitted) It happens ...
0 votes
1 answer
2k views

rsyslog, is there a way to see the facility codes of messages recieved?

I have a cisco ftd sending logs tagged with local3(19) however I am still seeing some messages ending up in my users.log instead of where i have them configured to be sent. Is that where they would ...
1 vote
2 answers
14k views

SSH using publickey not working on debian (Permission denied (publickey,password).) with clean /var/log/auth.log

For some reason, ssh over publickey isn't working as expected. I've set this up before, and it's worked before on other machines. No idea what I'm doing wrong here... very verbose output of ssh ...
8 votes
3 answers
25k views

"500 OOPS: vsftpd: refusing to run with writable root inside chroot()" - login failed on Debian

I installed vsFTPd for running an FTP server on Debian 7.3 (Wheezy). I checked the vsFTPd version was 2.3.5, and I configured it like so: listen=YES local_enable=YES write_enable=YES ...
2 votes
1 answer
2k views

OpenVPN and heartbeat

I have several servers connected to OpenVPN and I want to make a simple IP failover with a heartbeat, but I can't figure out how to assign a virtual OpenVPN IP. Here is my config ha.cf on server1: ...
2 votes
2 answers
12k views

Adding Virtio block devices at runtime in Libvirt KVM

I'm running Debian Wheezy Beta 4 with KVM based guest systems which run the same operating system. I'm using LibVirt to manage the virtualisation. What I would like to do is to attach an LVM based ...
0 votes
1 answer
509 views

How do I prevent ntfs-3g use starving my ZFS ARC of memory?

I have an HP Microserver running OpenMediaVault 2.1.18 (Stone burner), based on Debian GNU/Linux 7 (wheezy). A few days ago, I needed to copy a large number of files from a USB drive, formatted with ...
5 votes
2 answers
16k views

Debian wheezy, update repository

I'm working with a Debian GNU/Linux 7.5 (wheezy) When I check the file /etc/apt/sources.list The file has this line: # Line commented out by installer because it failed to verify: #deb http://...
0 votes
2 answers
805 views

Correct procedure for mounting xfs filesystem to use quotas

I am using a Hetzner box on which I have configured my partitions to use LVM, and have set /home as a xfs filesystem. I use Webmin to administer the box which is running Debian 7.6, and have the ...
1 vote
3 answers
2k views

Debconf broke after system failure

I have some serious problems with one of my web servers running debian wheezy. It seem that last week the server center had an error which caused the machine to shutdown suddenly. Since then some ...
28 votes
3 answers
112k views

Debian: How to run a script on startup without having to write 30 lines of shell script?

I have a Debian server and I just need to run a script at startup. I read that: https://www.debian-administration.org/article/28/Making_scripts_run_at_boot_time_with_Debian I got now: insserv: ...
0 votes
1 answer
80 views

Upgrading qmail from 1.03-38 to 1.06-5

I'm in a bit of a pickle. I tried to upgrade a chroot'ed environment and it seems I broke dpkg in the process. I don't know if the cause of the problems is that apt-get isn't able to handle a qmail ...
9 votes
4 answers
19k views

After reboot debian box ignore sysctl.conf values

Where is right place for sysctl redefined values? I have: > uname -a Linux note 3.1.0-1-amd64 #1 SMP Tue Jan 10 05:01:58 UTC 2012 x86_64 GNU/Linux > cat /etc/debian_version wheezy/sid > ...
12 votes
2 answers
38k views

Suddenly, shutdown command can't be found anymore

I logged in to my Debian 7 server, did an upgrade using apt and wanted to shutdown+reboot using shutdown -r now as i did a lot of times before. This time, the shutdown command can't be found anymore. ...
1 vote
1 answer
1k views

Setting up a local mirror

Specifically for Wheezy, does anyone know if some of the existing mirror scripts still work or can point me in the right direction to start? For example, will Debmirror work with archive.debian.org? ...

1
2 3 4 5
8