I have a Dell server running CentOS 6 using PERC H710 Raid Controller card with Raid 5 setup and I want to monitor the hard disk failure/working status behind the Raid Controller. Then I should be ...
For example if I go to create a new virtual disk in Dell OpenManage Server will it see the full capacity of the physical drive? I know it's supposed to be able to use a full 3TB drive but I can not ...
A client of ours has a server running Windows that is installed on a PERC S300 software RAID. We want to upgrade this to a larger capacity, so we are also upgrading to a hardware RAID card (PERC ...
I am seeing only 50MB/s reads: ensnare@box:~$ sudo hdparm -tT /dev/sda [sudo] password for ensnare: /dev/sda: Timing cached reads: 4592 MB in 2.00 seconds = 2296.48 MB/sec Timing buffered disk ...