4
votes
1answer
56 views

How to determine the Java version needed for different versions of DRACs

We have two different server machines in our workplace, they are: Dell - PowerEdge T620 - runs drac 7 (ver 1.35.35) Dell - PowerEdge 2950 - runs drac 5 (ver 1.65) Is it possible for me to ...
2
votes
1answer
101 views

iDRAC login loop

I am trying to upgrade the iDRAC on my PowerEdge R710 but am unable to login to the Web Interface. After I enter the admin login and password in the web UI, it thinks about it for a while, and ...
0
votes
0answers
285 views

iDRAC6 JViewer Unusable

I'm getting the following error when trying to launch the Virtual Console, but the Virtual Console Preview works fine (it displays a small preview about once a second). I've confirmed that my M610 ...
0
votes
0answers
448 views

Dell iDRAC 6 Express; replace with used iDRAC 6 Enterprise for remote KVM & significant savings?

I just inherited three Dell R620 servers from another department and they only have iDRAC 6 Express. The physical dedicated iDRAC 6 card is present but not licensed. It appears that the only way to ...
0
votes
1answer
49 views

Which DRAC 5 P/N is needed/better for a PowerEdge 1950 III? [closed]

From my own research, I've seen two different P/Ns for DRAC5 cards. The two P/Ns I've seen are 0WW126/G8593. What is the difference and which would be best to use with my server?
0
votes
0answers
137 views

Can't power on remote Poweredge 1950 using DRAC 5

There was an issue with a build server this morning, so I decided to log in using the vSphere client to view the console, but no response. As it turned out, the server had simple turned itself off ...
3
votes
2answers
1k views

PowerEdge R905 - “The disk drive bay battery has failed”

I recently got an alert from a PE 905 which I manage: I1912 SEL Full. I checked the SEL via the DRAC web UI and saw the following message repeated about 50 times for today: "The disk drive bay ...
-5
votes
1answer
398 views

Dell Poweredge DRAC through VGA and keyboard? [closed]

I recently purchased a used PowerEdge C1100 on ebay. It supposedly has DRAC. I'm a complete newb when it comes to these things. I figured it'd be somewhat like a normal PC :P I'm finding that a ...
3
votes
1answer
13k views

What are the iDRAC 7 default settings?

My company has purchased a server in one of our foreign offices. As this office is very far away, management has asked me to set it up remotely, to save on travel costs. The server (a PowerEdge T320) ...
0
votes
1answer
519 views

Remote Access Problems with DRAC 5 on Dell PowerEdge 1950

Today I received my first Dell PowerEdge 1950 server with a DRAC 5 card. On my local network I have static configurations on my Linux systems using this for instance: iface eth0 inet static ...
3
votes
3answers
7k views

Reset DRAC to factory defaults

I put a DRAC that has not been used in a long time into a PowerEdge 1750 running CentOS 5.8. Because we run our DRACs on a separate network, we don't change the password from the default ...
0
votes
2answers
2k views

Remote Power On and IPMI Poweredge 2950

I have a poweredge 2950 server with a drac card that supports ipmi that i have set to share the connection with one of the nics but has a separate ip address. It is running esxi as the os and I was ...
0
votes
1answer
176 views

OMSA killed DRAC

I used to be able to use both OMSA and DRAC at the same time on my PE1950. I've updated the OMSA recently and DRAC is not accessible right after starting "Systems Management Data Engine". Shutting ...
4
votes
2answers
2k views

unable to log into DRAC5, stuck at logging in please wait

Dell 2950 III, DRAC5 I was able to previously log into to the DRAC but probably haven't done so in a year or so. I have three of those servers and I am unable to log into any of them remotely. I ...
2
votes
2answers
2k views

R710 - DRAC Configuration IPv4

* Resolved by rolling back to DRAC6_FRMW_WIN_R279926.EXE * Having an issue with a new R710 where I cannot enable IPv4 on the iDRAC card. I have tried enabling IPv4 and setting static IP, Gateway ...
4
votes
2answers
4k views

Dell Poweredge 2950 firmware upgrade bricked DRAC 5

We recently tried to upgrade the firmware on a DRAC 5 in a Poweredge 2950 with the latest "Update package for Red Hat Linux" as available here. This failed half way though with an error and ...
2
votes
1answer
6k views

Dell DRAC console sessions won't time out

I've got a Dell DRAC 5 card connected to a PowerEdge 2900. I've used the console redirect successfully before, but presently the "console redirection" section shows "Active Sessions" = 2, so it won't ...
3
votes
3answers
9k views

Any trick to connect to the DRAC console from a mac?

I have two Dell PowerEdge 2950 with DRAC5 cards, and I'm a mac user, running Snow Leopard. Is there any trick to benefit from the remote console capability? I am open to any suggestion, including ...
0
votes
3answers
788 views

Dying Dell PowerEdge 1800 graphics card - any solution?

I'm having a bit of problem... at the children's hospital where I work (Beit Cure Hospital in Blantyre, Malawi), we're using a 4 year old Dell PowerEdge 1800 tower server. About two years ago, we ...
1
vote
2answers
4k views

Can a RAID array be rebuilt through DRAC?

I have a Poweredge T610 and I was wondering if it is possible to completely erase and rebuild the RAID array remotely with DRAC