-1
votes
0answers
18 views

Dell Power Edge T410 with Xeon E5620 memory compatibility

Currently we have a Dell Power Edge T410 with one Xeon E5620 processor and 3x2GB UDIMM memory modules installed, the motherboard is a DELL 0H19HD and I want to upgrade the server. The plan is to add ...
0
votes
0answers
42 views

PowerEdge R210 Memory Upgrade

I have a Dell PowerEdge R210 II running with 2GB of memory. I wanted to upgrade the memory to 10GB as I am running ESXi on the machine. I purchased an ECC RAM (2 x 4GB) which allows me to get the RAM ...
1
vote
1answer
323 views

Dell R610 memory configuration for all 12 slots

I purchased 12 sticks of RAM on eBay to go into a Dell R610 server. The RAM is ECC REG PC3-12800 DDR3-1600 yet when I occupy all 12 slots with this ram I get the following error on boot: MEMORY ...
3
votes
2answers
681 views

What does “single-bit ECC errors were detected on the RAID controller” mean?

I have a Dell T7600 with a Perc H710P RAID controller and 4 attached 3TB drives. Over the past few months the RAID controller has been intermittently reporting errors on boot: "no boot device found", ...
2
votes
1answer
208 views

Why wont my Dell server use IBM ram?

I stumbled upon four pieces of 4GB PC2 5300F RAM from IBM (Part Number 43X5061). In my Dell Poweredge 1950 Rev 2 server there currently are two 512MB sticks, which appear to have the same ...
1
vote
0answers
614 views

What is 16GB RDIMM, 1600MT/s, Low Volt, Dual Rank, x4 Data Width used in (Dell R720xd memory)? [closed]

I want to check the price for "16GB RDIMM, 1600MT/s, Low Volt, Dual Rank, x4 Data Width [$229.60]" that is offered with Dell R720xd (Intel® Xeon® E5-2630 v2 CPU). But the keyword of memory used by ...
-2
votes
1answer
152 views

Dell Power Edge 2950 upgrade from 4GB to 32GB - says no memory

I removed the original 4 x 1GB memory from our Dell Poweredge 2950 server (we have 2 Xeon quadcore processors). I then added 8 x 4GB RAM. When booting, the server gives a message saying no memory ...
1
vote
3answers
139 views

Are memory-module blanks really important to have for a Dell PowerEdge T110 2 server? Or are they optional?

I have removed and installed ram-chips from laptops and desktops before, but this is the first time I am doing it on a server (Dell PowerEdge T110 2). The hardware manual cautions that a memory-module ...
-4
votes
1answer
216 views

RAM Warning R815 DELL [closed]

I tried to set a R815 DELL server with 192GB capacity. The problem is that when I turned on the server the following warning message appeared : warning : the installed memory configuration is not ...
2
votes
2answers
1k views

Dell Power Edge 2950 - E211 SBE LOG DISABLE DIMM6

Any idea of what this error E211 SBE LOG DISABLE DIMM6 could mean? Anyone have experienced this? I know that it sound pretty obvious, that is the 6th bank of my memory, and guest what: I have ...
0
votes
2answers
306 views

PowerEdge 2800 RAM Upgrade FAIL

I have been trying to upgrade the RAM on my Dell PowerEdge 2800 unsuccessfully, likely because I do not know enough about RAM. The RAM I got a hold of is labeled 2GB 2RX4 PC2-5300P-555-12-xx. When ...
1
vote
2answers
991 views

dell poweredge r210 II mix memory

I have Dell PowerEdge R210 II server with 4Gb of memory installed. And I also have 8Gb memory module. I replaced 4Gb with 8Gb – server is working ok. But mixing memory in different ways got error ...
1
vote
1answer
360 views

Dell PowerEdge R310 and T310 not allowing 6x 4GB RDIMM configuration

I have 6 identical Kingston KTD-PE313E/4G modules and trying to install to Dell PE R310 and T310 servers but with no luck. 4x DIMMs works but not 6x DIMMs. None of the modules are faulty. (I have ...
-7
votes
3answers
581 views

How to know the maximum capacity of memory/RAM of a server? [closed]

I have a Dell PowerEdge T410 and have installed 16Gb RAM for it. I don't know if I can extend it to 32Gb, 64Gb, ... RAM on this server corresponding to my customized configuration So my question ...
1
vote
2answers
948 views

Which type of RAM is supported in our servers?

I need to increase the RAM in our DELL servers. I tried using lshw to see what is already installed, but I cannot see if the RAM installed is a UDIMM or RDIMM. Handle 0x1100, DMI type 17, 28 bytes ...
0
votes
1answer
933 views

Dell T410 Memory Upgrade - mixing sizes

We have a Dell T410 server using 4x2GB RDIMMs for a total of 8GB. I thought I would be able to replace 2 of those 2GB RDIMMs with 2x4GB RDIMMs to increase our total RAM from 8GB to 12GB. However, I ...
1
vote
3answers
965 views

Dell Poweredge 2950 RAM Upgrade

We're looking to upgrade our existing 2GB x 2 RAM by adding 4x4GB RAM. Will the server encounter some problem or inefficiency by having 2 slots with 2GB and 4 slots with 4GB? Is it recommended all ...
3
votes
1answer
166 views

Non Dell memory in a PowerEdge 1850

Would it be acceptable to install compatible RAM from a non Dell manufacturer? Specifically I am wondering if it is OK to install HP PC2-5300P ECC memory into a PowerEdge 1850? The part number for ...
1
vote
2answers
3k views

Dell PowerEdge - Advanced ECC vs Optimized for 8GB RAM

We are buying new Dell R410 servers, and I'm trying to figure out the best RAM performance we can get. Dell offers the following choices: 8GB Memory (8x1GB), 1333MHz Single Ranked UDIMMs for 2 ...
3
votes
2answers
501 views

Dell 2950 Ram Upgrade

We have a Dell 2950 III with 4x4GB of RAM and a single Xeon E5430 processor. We would like to upgrade with another 16GB of RAM (4x4GB) but can't determine whether we would need to add a second ...
2
votes
1answer
731 views

Dell Poweredge R710 memory mode

Dell Poweredge R710 offers 16GB memory (4x4GB) in Advanced ECC mode for two processes. Can I reconfigure it as Optimized mode in BIOS, even though apparently each socket only has two channels ...
1
vote
2answers
154 views

What kind of Ram for IIS sites that use a lot of memory?

I have a server where each site in IIS 7.5 stores all of it's settings in memory. So I tend to eat up a lot of RAM. I need to order a new server and I was wondering what kind of Memory configuration ...
2
votes
5answers
5k views

Why won't a Dell PowerEdge R310 support 16GB RAM in a 4x 4GB RDIMM configuration?

I am trying to upgrade a Dell R310 from the 1GB RAM that it came with (1 stick - 1GB UDIMM - Hynix part number HMT112U7BFR8C) to 16GB using 4 x 4GB Dual Rank RDIMM 1333MHz memory modules purchased ...
1
vote
4answers
1k views

Dell Poweredge 2650 RAM Upgrade

I bought an old Dell Poweredge 2650 off ebay to use as a dev server, but I need to get more RAM for it. From what I understand there were 2 versions of the 2650 released, with the older version only ...
1
vote
6answers
2k views

Does Dell Poweredge SC1425 need proprietary memory?

We have a Dell Poweredge SC1425 which we're trying to upgrade to serve as an emergency backup, and having no luck finding memory that works with it. The 2gb that's in there works fine - it's when we ...