We are building a private cloud here, VMs have at least 2 NICs, sometimes 3 or 4, each may be statically configured for IPv4 and/or IPv6 or be configured by DHCP or a combo of the two. Yes it's a ...
It seems like when dhclient runs on eth0 I get an IPv4 address from the DHCP server and a Scope:Link IPv6 address attached to eth0: inet6 addr: fe80::a00:27ff:fed0:4d41/64 Scope:Link But I can't ...
I have eth0, eth1. For each interface run dhclient on default port 546 (547 ?). eth1 does not have connection to the network. If dhclient for eth0 bounds before dhclient eth2 starts the eth0 gets IP. ...
How to configure radvd, dhcpd6, routing and /64 subnet based on delegated prefix by DHCPv6-PD server?
My ISP has just started IPv4/IPv6 dual stack service. In order to connect IPv4/IPv6 internet, almost all users usually use a CPE leased by the ISP. But I want to use my Linux router instead of such ...