Disk storage is generally the permanent data storage of a server.

learn more… | top users | synonyms

-4
votes
0answers
18 views

A DegradedArray event had been detected on md device /dev/md0 [on hold]

This is an automatically generated mail message from mdadm running on XXXXXX A DegradedArray event had been detected on md device /dev/md0. Faithfully yours, etc. P.S. The /proc/mdstat file ...
0
votes
2answers
51 views

Unreasonable performance expectations for RAID 0 performance?

This is my first time building a machine with a hardware RAID card. We bought a Dell T620 with the H710P RAID controller (1GB NV Cache), a 160GB Solid State Drive (SATA Read Intensive MLC 3Gbps), and ...
2
votes
3answers
174 views

What's the best program to use for copying 12TB of data onto 4 3TB hard drives on linux?

I have a 12TB enclosure that's filled with data (ext3). I'd like to make a copy of it, spanned across individual 3TB disks, each of which is readable on its own (no RAID or bonding). Ideally, I'd like ...
1
vote
1answer
126 views

upgrade/reinstall vmware vsan from beta

Being a VSAN beta tester I decided to upgrade to GA version as VMWare suggests for production sites. They say, it is not possible/supported to upgrade from beta to GA version, and I did not upgrade, ...
16
votes
3answers
12k views

limit linux background flush (dirty pages)

Background flushing in linux happens when either too much written data is pending (adjustable via /proc/sys/vm/dirty_background_ratio) or a timeout for pending writes is reached ...
0
votes
0answers
26 views

Have to keep resetting quota for user on CentOS 6.5 while using VirtualMin

I have VirtualMin installed on a development server running CentOS 6.5. None of the users have explicit quotas, yet periodically I get write issues when running as that user. If I run as root, I have ...
3
votes
1answer
46 views

Why are cgroups (blkio serviced bytes) and iotop producing diverging results

I work with lxc user space tools on ubuntu 14.04 and I want to perform some stress tests and benchmarking within a container. I know that free and htop are not working properly in a container. I am ...
0
votes
3answers
1k views

Re-sizing disk partition linux/vm

I VM Player running a linux guest and I was wanting to know how do I expand the disk? In the VM player I gave more disk space but I am not sure how to mount/expand/connect the new disk space to the ...
0
votes
0answers
17 views

poweredge 1950 iii disk options

I have a pair of poweredge 1950 iii boxes which I use for a VMware lab. They are loaded with 64 gb of ram (I discovered that this is actually supported), a pair of quad core cpus, and a pair of 300gb ...
3
votes
2answers
2k views

Issues with Server 2012 using DFSR running on Hyper-V 2012

We have a number of Server 2012 systems, all of which run virtualised on Hyper-V 2012 server. We are having problems with two such virtual instances, both of which are used as file servers, whereby ...
0
votes
2answers
2k views

Is there any way to shrink qcow2 image without converting it raw?

Is there any way to shrink qcow2 image without converting it raw? I cannot convert it to raw because I don't have disk space enough for raw image.
0
votes
1answer
19 views

Can I convert a production disk to Dynamic?

I have a server that is running out of disk space on a partition. I can't expand to the partition running out of space because the disk is not dynamic? From computer manager can I convert the disk to ...
1
vote
1answer
14 views

Obtain an offline image of an Xserve disk

We have an Intel Xserve with Mac OS X 10.4. It seems to have been infected by a virus. We want to obtain the disk image without booting into the OS. Preferably, we would want to boot via a USB disk ...
2
votes
0answers
52 views

Can I rely on scsi host numbers to always stay the same?

I want to detect whether a disk is attached to the correct sata-port. While lsscsi gives me some useful information about the used host, I was wondering whether the SCSI host number will always stay ...
12
votes
7answers
567 views

How do storage IOPS change in response to disk capacity?

All other things being equal, how would a storage array's IOPS performance change if one used larger disks. For example, take an array with 10 X 100GB disks. Measure IOPS for sequential 256kb block ...
1
vote
1answer
33 views

Identify disks in vCenter to partitions in Linux guest

What I am trying to accomplish is to correlate hard drive in vCenter to the disks in the Linux guest. So here it goes Opening up settings for the guest in vCenter and moving to hardware tab, shows ...
0
votes
1answer
1k views

MegaCLI causes drive “Other Error”

I am having an issue where running "megalci -PDList -aAll" will cause an Other Error to be logged for 2 of the 6 discs in a pair of servers I have. Here is that again in more detail. I have two ...
1
vote
1answer
2k views

How to mount encrypted volume at login (Ubuntu 12.04, pam_mount)

I'm trying to get pam_mount working on Ubuntu 12.04. I have /dev/sda1 (encrypted partition) with /dev/dm-1 (ext4 formatted) inside it. Should ~/.pam_mount.conf.xml be trying to mount /dev/sda1 or ...
1
vote
6answers
298 views

Failure of virtual SCSI device, Server 2012 Hyper-V - EventId 129 - Reset to device, \DeviceRaidPort0, was issued

Been running Server 2012 Hyper-V for a few months now quite reliably. That was until the following event started: EventId 129 - Reset to device, \DeviceRaidPort0, was issued When this occurs all ...
0
votes
1answer
78 views

Linux - KVM - very slow disk io

The I/O performance of my new server is pretty low. I Googled and tried everything I can imagine. First of all, here are the Hardware Components: AMD Opteron(tm) Processor 6344 4x Seagate ...
2
votes
0answers
36 views

actual disk iops and write merging

/dev/sdb has LVM and exposes a single logical volume, dm-0. While writing to dm-0, /proc/diskstats reports: # of writes completed sdb 29646717 dm-0 131315099 # of writes merged: sdb 101668283 dm-0 ...
0
votes
0answers
35 views

Backup server (System Center 2012 DPM Admin Console) Disk Missing

My backup server was recently powered off by an employee who was unaware of what they were doing. When I powered it back on, I entered the admin console to see that all of the volumes that were ...
2
votes
2answers
85 views

When to use hot-spare?

On my newly purchased HP MDS600 with 70x 4TB Nearline SAS disks, I now need to configure the disks, and I want raidz2, so the raid sizes follows 2^n+2. The options I therefore have are 7 raid sets ...
0
votes
0answers
198 views

Ubuntu 14.04 disk utility SMART self-test failed threshold not exceeded

I'm using the "Disks" program in Ubuntu 14.04 (live DVD) to assess the health of a drive I suspect is failing. However, when I first opened the program, it showed that the overall health was OK and ...
1
vote
1answer
39 views

How to identify EBS volumes vs local volumes on running EC2 instance

On a running EC2 instance, how do I identify EBS volumes and local disks ? I would like to identify them from shell. fdisk, lsblk is not helping to pinpoint the EBS volumes only. Lets say I have ...
2
votes
2answers
2k views

decipher acronyms for Netapp disk shelf configuration options

I want to know what is the meaning of -C and QS to understand the difference between these two disk shelf configurations: DSK SHLF,24x450GB,15K,3Gb SAS,IOM3,-C,R5 DSK SHLF,24x450GB,15K,3Gb ...
0
votes
0answers
19 views

Any ideas out there as to why a Dynamic Disk in Windows shows “failed redundancy” every time the machine is rebooted?

The unit in question has a software RAID handled by Windows. I'm not a big fan of software RAIDs, but the owner of the unit insists it is setup that way. Every time the unit is powered off, either ...
1
vote
6answers
4k views

How do I find the system's disk capacity?

I run the command df -g to get the GB block sizes in the second column (left to right). If I want to get the total capacity for all hard disks, which command should I use? OS is AIX.
0
votes
1answer
57 views

Install Winsat on server 2012? Windows System Assesment Tool

I use winsat disk to see my disk read / write speed windows 8 and it works great: cmd : winsat disk -drive c Can this be used on windows server 2012?
3
votes
1answer
5k views

what is acceptable datastore latency on VMware ESXi host?

Looking at our performance figures on our existing VMware ESXi 4.1 host at the Datastore/Real-time performance data Write Latency Avg 14 ms Max 41 ms Read Latency Avg 4.5 ms Max 12 ms People ...
0
votes
1answer
47 views

How to correctly move application data to an attached disk on an Azure Linux VM

I have a Linux VM on Azure that originally came with a 30G OS disk. As I had an application that had accumulated a lot of data, I attached a new disk through the Azure Dashboard and here is how it ...
6
votes
2answers
889 views

Why are “sectors per track” still relevant on a modern OS with modern drives?

I am building out a new machine and the raid controller is asking me for sectors per track. I haven't had to deal with disk math in a long time (1998?), and I can't find anything that pertains to ...
0
votes
1answer
1k views

Upgrading a PERC h310 to a PERC H710 mini RAID controller on a Dell R620

I have an ESXi 5.0 Free license host using an internal Datastore (RAID 5, 5 Disk) that was configured with a Dell PERC h310 RAID controller. The disk performance was very poor, so I upgraded to the ...
1
vote
3answers
94 views

Moving partitions to the root partition

I am currently stuck with a restrictive partitioning scheme that makes my partitions fill up. It looks like this: /dev/sda7 870G 315G 511G 39% / /dev/sda6 2.0G 271M 1.6G ...
0
votes
2answers
34 views

Migrate unix-system to hardware RAID-5 possible?

At the moment, I have a Intel SR2500 with 5 disks running at home. 4 of the disks aren't used at the moment due to maintenance-reasons. Because it's an expeiment-laboratory-machine where I can try ...
4
votes
3answers
137 views

How reliable are current 2 TByte consumer grade disk drives?

Most cheap SATA disk drives are rated with "1 non-recoverable read error per 10^14 bits read". What does this mean? 10^14 bits is just 12.5 TByte. If I have a full 2 TByte disk and I copy it to a ...
-1
votes
1answer
31 views

Getting ssd, should i keep the ssd cache drive

We are going to install sdd's as main hdd in all of our pc's. However, some of them already have an ssd drive that is beeing used as a cache drive. Should be keep this chace ssd? It was my though ...
0
votes
0answers
8 views

df results don't add up [duplicate]

When I use df -H and I see one of the entries like this: Filesystem Size Used Avail Use% Mounted on /dev/sdb1 985G 210M 935G 1% /files 210M Used + 935G Avail = 935.2G which doesn't ...
3
votes
2answers
89 views

Selecting a boot drive for Hyper-V 2012 server - is a boot drive performance important?

I'm setting up a new Hyper-V 2012 server dedicated to virtualization and I'm trying to determine the best choice for the boot drive. I have 2x250gb SSD drives i'm considering for storage pools for ...
0
votes
1answer
43 views

Windows 2012 server wrong iscsi disk size

I have Windows Server 2012 and iSCSI storage. On the storage, I created a RAID1 array out of two 2TB disks and connected it over iSCSI to the server. But the server sees the connected device as ...
7
votes
1answer
102 views

Disk size addressable by the OS

I have a 3ware 9550SXU-12 storage controller and 750G disks connected to it. The disks are configured as single units (not JBOD). I've been running some performance tests, mainly to see the impact of ...
4
votes
4answers
7k views

Howto check disk I/O utilisation per process

Im having a problem with a stalling Linux system and I have found sysstat/sar to report huge peaks in disk I/O utilization, average service time as well as average wait time at the time of the system ...
0
votes
1answer
135 views

Abnormal CPU usage during Disk Write Operations

I have a decent CentOS 6.5 dedicated host (CentOS 6.5/E3-1230 3.2Ghz Quad Core + HT/16GB/Software Raid 1 SATA II/WD2503ABYX/ext4) with the default CentOS kernel and "elevator=deadline" in grub. I/O ...
0
votes
1answer
40 views

Are these disk errors cause for concern?

Every day I get an email from the logwatch program on our company web server. The server is running CentOS 6 and uses Apache, MySQL and PHP to serve web pages. It is a dedicated piece of hardware (not ...
0
votes
2answers
43 views

Windows 2008 Performance Monitor - Disk Performance

We have a Windows 2008 R2 server with SQL installed. We are trying to measure if the disk performance is causing any bottle necks. I've found many suggestions regarding which monitors to use, but am ...
0
votes
0answers
34 views

How do I check disk performance of LVM drive?

I have a CentOS server with 2 hard drives configured to use LVM over RAID1. How do I benchmark my hard drive? As seen in this question, I have used the following commands: # check read performance ...
1
vote
4answers
4k views

Bad disk performance on HP DL360 with Smart Array P400i RAID controller

I have a HP DL360 server with 4x 146GB SAS disks and a Smart Array P400i RAID controller with 256MB cache. The disks are in RAID 5 (3 disks + 1 hot spare). The server is running VMware ESX 3i. The ...
0
votes
0answers
61 views

Debian mail server's Maildir folder with too many files causing disk I/O to go on high load

I have a Debian mail server running Postfix, Courier and Maildir, with disks on EXT3 filesystem. I have noticed that when I use my webmail application (Squirrelmail, in this case). It gets some kind ...
0
votes
2answers
459 views

Safely resizing partitions in CentOS 6

I have deployed two VMs on VMware with CentOS 6.3 Net Install. It has automatically created some partitions. It has created two major partition for root and home. root partition has size of 50GB and ...
0
votes
1answer
191 views

Extend a striped volume in Windows Server 2008 R2

Can striped volumes in Windows Server 2008 R2 be extended? I have searched here on ServerFault and also on Google for an answer to this, and I can't seem to find an answer. Even the commercial tools ...