-3
votes
1answer
65 views

Find RAID controller under Linux [closed]

I have been trying to find the RAID controller for good purpose. I need to find the right driver that works with the RAID controller. I can assure you i have a raid system in my server, here is an ...
0
votes
1answer
42 views

Ubunutu 12.04 Packet loss

I have this Ubuntu Server (12.04.2) which sometimes (thrice a day for 5 minutes) it's unreachable through zabbix and SolarWinds Orion. I logged into to Orion server and Zabbix server and did a ping ...
2
votes
0answers
272 views

Adaptec pm80xx Driver Drops Drives Randomly

I'm building a ZFS NAS using an Adaptec ASA-71605H HBA on Ubuntu 12.04.4. Modern Linux kernels ship with the open-source version of the required pm80xx kernel module. Adaptec provides a driver for ...
0
votes
1answer
24 views

hplip proper installation (linux)

Trying to print to an HP PhotoSmart printer from linux, all paths seem to lead to hplip. The hplip installer tells you not to install as root but instead prompts for a root password. In 20 years of ...
-1
votes
1answer
50 views

Differences between UNIX and Linux Drivers [closed]

I've been trying to find an answer to this, been on a wild goose chase. Since UNIX and Linux have different system architectures. My question is on the differences between the drivers for the SPARC ...
0
votes
1answer
242 views

irtouchServer on openSUSE 11.4 (i586) - (irtouchServer) did not claim interface 0 before use

I'm trying to install IR Touch from IRTOUCHSYSTEMS. I download the drivers and install them but on dmsg I see: usb 2-1.3: usbfs: process 8179 (irtouchServer) did not claim interface 0 before use ...
0
votes
1answer
90 views

Linux workstation as a printing proxy

HP LaserJet 1005 is connected to Windows 7 (x86) workstation and we cannot change that (it needs to be Windows 7 and needs to be connected there). Windows XP 32 bits drivers are used because HP does ...
2
votes
1answer
463 views

Printing to Xerox with XSA accounting from Linux

My company has a lot of Ubuntu 12.04 desktops and a new Xerox ColorQube 8900S networked printer. Using the .ppd file from Xerox I can print to the printer fine, unless XSA accounting is turned on. At ...
0
votes
1answer
354 views

Realtek R8168 network driver 8.034.00 not compiling under CentOS 5.8 64-bit [closed]

I'm trying to compile Realtek R8168 driver 8.034.00 on CentOS 5.8 64-bit and I got this: make -C /lib/modules/2.6.18-308.16.1.el5/build SUBDIRS=/r8168-8.034.00/src clean make[1]: Wejście do ...
-1
votes
4answers
1k views

Fujitsu Primergy RX100 S7, e1000e driver, cannot establish link

We have a Fujitsu Primergy RX100 S7 server. It has two Gigabit Ethernet ports: Intel 82574L Gigabit Ethernet, Intel 82579LM Gigabit Ethernet. Cards use e1000e driver. I have installed Ubuntu 12.04 on ...
2
votes
1answer
540 views

bonding driver in centos 5.5,mode balance-rr not work

i've creat a bonding interface in centos 5.5,i chose mode balance-rr,using slave eth6 and eth7,and the link of eth6 and eth7 is ok,here is the configuration file: [root@50:B3:42:00:00:A3 ...
1
vote
4answers
2k views

rtl8139 driver in modern linux kernels - is it included?

I need to support the realtek rtl8139 network card - is this included in modern (> 3.0) linux kernels? do I have to load any modules or install anything?
1
vote
1answer
300 views

ixgbe driver: Limit the max number of cores [closed]

I have a Linux workstation with 48 cores and runs ixgbe driver for fiber interface. And I have to test a project name Netmap on it. NetMap is a high performance network framework for high speed ...
1
vote
0answers
254 views

Erroneous IDE errors? (status=0x58 { DriveReady SeekComplete DataRequest })

I keep seeing these appearing on an embedded linux product I work on: hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest } ide: failed opcode was: unknown hda: DMA disabled ide0: reset: ...
1
vote
1answer
357 views

debian package to ko file

I have downloaded hp-be2net_4.0.359.0-2_all.deb package which is used for NIC driver for linux. I installed the above package using below command dpkg --install hp-be2net_4.0.359.0-2_all.deb Then ...
0
votes
1answer
845 views

Need advice on which PCI SATA Controller Card to Purchase [closed]

I have a major issue with the build of a machine I am trying to get up and running. My goal is to create a file server that will service the needs of my software development, personal media storage ...
0
votes
2answers
1k views

Installing Proxmox VE with RAID on a MSI 890FXA-GD70 board

I'm trying to install Proxmox VE on my server with a MSI 890FXA-GD70 motherboard, the RAID array is a on-board SB850 array. My RAID setup is: 2x500gb Western Digital Caviar Blue Setup in RAID1 ...
1
vote
1answer
352 views

New ethernet dual card hangs the server when doing ifconfig eth2 down

What I'm going to explain is happening on two different servers with same OS, same hardware and same hardware upgrade. IMHO I think may be a driver error is going on, but don't know how to figure it ...
1
vote
2answers
7k views

how to configure modprobe to recognize newly installed driver for eth1 on bootup?

I have a server running Debian 6. My motherboard has two interfaces, eth0 and eth1. Debian does not have a driver for eth1 (e1000e), so I installed the driver provided by Intel (e1000e-1.4.4). ...
1
vote
4answers
1k views

Network card suddently doesn't answer anymore, but answers after pinging

We have a problem with the network card on a Dell Power Edge R410 with Debian 6 (squeeze). It seems that the network card went into "sleep" mode after some time. If we are connected via ssh to the ...
0
votes
4answers
14k views

How to install network adapter in Linux (CentOS 5)

My company has a CentOS 5 Linux server. The network card died today and we replaced it with an Intel Pro 1000 GT network adapter. I'm not great with Linux. How can I get this new NIC working? Thanks ...
0
votes
1answer
916 views

Find CCISS version

I'm currently running Ubuntu 10.10, and would like to just find out what version of HP's CCISS RAID array driver I'm running. I've looked around hpacucli and couldn't find anything; can anyone point ...
0
votes
1answer
355 views

Updating / forcing usb wireless driver in Linux

I have a new USB WIFI stick Airlive X.USB-3. It's a a/b/g/n solution with dual external atennas based ar9170 chipset. http://wireless.kernel.org/en/users/Drivers/ar9170 website states that the ...
6
votes
3answers
7k views

How does Linux determine the SCSI address of a disk?

Greetings, I'm working with RHEL 5.5 guest VMs under VMware ESX 4. When I configure the virtual disks in the VM hardware settings, each disk has a SCSI address in the format "N:M". For example, "1:3" ...
1
vote
3answers
1k views

Hyper-V 2008 R2 synthetic networking stops working with linux 2.6.32.15

so I thought I'd give Hyper-V on Windows Server 2008 R2 Enterprise a try on my Homeserver (yes, it's legit... got it from msdnaa). First thing to throw at it was my firewall which runs IPFire. This ...
1
vote
2answers
54 views

What actions get carried out on the files in /dev?

What exactly does the files in /dev do? I'm having a difficult time understanding the relation between the files here, device drivers and the device. Taking an example, what does /dev/hda do? does ...
2
votes
2answers
2k views

IPFire firewall under Hyper-V. How to get synthetic devices working?

The latest version of IPFire (v2.7 core 38) uses the linux 2.6.32.15 kernel. This includes Microsoft's Hyper-V synthetic drivers. How do I get them working? When IPFire boots, it loads the hv_vmbus ...
5
votes
2answers
4k views

How do I tell which kernel module is servicing a /dev device?

How do I find out which kernel module (as seen by typing lsmod) is servicing a particular device in /dev ? In other words, say I have a device, /dev/mouse0 and I want to find out which kernel module ...
2
votes
2answers
132 views

Windows Server 2003 on components that have no driver support

I recently got an i5 processor on an ASUS P7P55D LE motherboard to act as a cheap server only to realise that there are no windows 2003 drivers for the chipset and network. I haven't tried yet but can ...
2
votes
3answers
220 views

What key parts of a Linux server are worth chasing drivers for?

I have a spare Dell Poweredge 2800 server that had a couple of drives crash and has been inactive. I decided to bring it to life as an Asterisk server - experimenting with Asterisk and Linux. We ...
2
votes
2answers
13k views

How to install tun/tap driver for openvpn on centos linux?

How to install tun/tap driver for openvpn on centos linux? Best wishes for you.
8
votes
11answers
2k views

GUI tools to administer Linux Box

What GUI tools do you advise to improve the usability of Linux for those accustomed to doing system administration the windows-way? Users new to Linux often get confused when they need to configure ...
1
vote
3answers
777 views

X11 performance problem after upgrading from Centos3 to Centos5 with an ATI Rage XL

After upgrading a computer from Centos3 to Centos5 an application that does a lot of scrolling took a very high performance hit. top tells me that X is using a lot of CPU and that was not happening ...
0
votes
2answers
788 views

Modem on /dev/ttyS0 can no longer be seen on my linux CentOS

I'm having a problem here, I have a modem that worked on a linux machine perfectly. Suddenly, it doesn't work any more. Linux no longer can see a modem on /dev/ttyS0 Linux doesn't see it using the ...
4
votes
4answers
821 views

The same driver for multiple network cards — performance bottleneck?

I'm using driver e1000e for multiple Intel network cards (Intel EXPI9402PT, based on 82571EB chip). The problem is that when I'm trying to utilize maximum speed (1GB) on more than one interface, speed ...
8
votes
6answers
1k views

What is the added value of installing Dell / HP / IBM / etc. supplied drivers?

I manage a couple of hundred Linux servers, most of which are HP, if they are not virtualized. Historically, we have installed the HP ProLiant Support Pack (PSP) since before I started working here. ...
2
votes
1answer
2k views

Are PERC 5/i RAID controller drivers available and easily installed on Ubuntu 9.04?

We are looking to migrate a Dell PowerEdge 1950 with PERC 5/i RAID controller from an aging Windows 2000 Server installation to a modern Linux distro, probably Ubuntu 9.04. I have come across some ...