We've just bought a new Dell PowerEdge R620 to replace the oldest of our 3 hosts in our vSphere cluster. The existing hosts are connected to our EMC VNX 5300 SAN using gigabit ethernet which is a ...
So here's the scenario, and I'm hoping @Chopper3 can chime in here. For our SAN fabric, we have a pair of Cisco MDS 9513 FC switches with three EMC frames and four Cisco UCS domains directly attached. ...
I am very new to SANs and have inherited an old EMC CX300 to play with. The CX300 is purely FC, but I'd like to experiment with ISCSI as well without having to purchase an expensive ISCSI gateway ...
In my DC admins have to unplug my FC connection from ESXi5 (from EMC VNX) (temporary, some maintance works). I have never done that before and have some doubt about my own procedure... My first ...
I have problem with discovering my FC-connected CX-300 storage. Frankly speaking I'm complete novice in FibreChannel, so step by step explanation would be appreciated. My configuration consist of two ...
I (will) get a EMC Symmetrix DS24-M2 FC Switch which is a branded McData 4500. I'm unsure how/if it's possible to update the box to the latest firmware without an official service contract anymore. ...