I am testing the network performance of two workstations, each having 2.4GHz Xeon quad core processors and NC550SFP PCIe Dual Port 10GbE Server Adapters, linked back to back. I've checked the ...
As I understand, a 10Gb Ethernet card is capable of putting 10Gb every second on (say) a fibre optics cable. Now naively, for this to happen in hardware, one will need a 10GHz clock running the ...
I am under the impression that you should use optical for 10GbE networking because of a BER (bit error rate) several orders of magnitude lower than copper. I'm pretty sure I previously found ...
I have a server in a data center, which has an Ethernet NIC card with Fibre support. I have a 1Gbps connection and my ISP asked me to make sure the settings on my device are as follows: Full Duplex, ...
I have two Linux machines, each equipped with a Solarflare SFN5122F 10GbE NIC. The two NICs are connected together with an SFP+ Direct Attach cable. I am using netperf to measure TCP throughput ...
We need to arrange Ethernet network between two cities - this gonna be a partnership with other organization: we help them with equipment and get some bandwidth. I am newbie beyond 1 Gbit networks, ...
The setup is as follow : 3 Linux servers with Intel CX4 10 GigE controllers and an X-Serve with a Myricom 10 GigE CX4 controller are connected to a ProCurve 4208vl switch, with a myriad of other ...