I'm trying to set up an ext3 filesystem on a RAID 6 array (with 6 disks) on XenServer 6.2 linux. All the help I can find tells me to use the -E stride=xx,stripe-width=xx options. However my version ...
I recently added a 7th 2TB drive to a linux md software RAID 6 setup. After md finished reshaping the array from 6 to 7 drives (from 8 to 10TB), I was still able to mount the file system without ...
“hot swapping” linux md raid1 - does re-mounting file-system temporarily read-only enable safe disconnection?
There's is an ext3 filesystem on top of Linux md raid1, array consists of two hard drives. Various services, including databases run on and write to it. Let's say for argument's sake that to minimize ...
I've got 6 drives (each 1.5T, all same model and firmware revision) that are part of a RAID5 array. The RAID5 makes a LVM volume group and a logical group. The latter contains only one ext3 partition. ...