The tag has no wiki summary.

learn more… | top users | synonyms

-1
votes
0answers
18 views

SQL Server 2014 backups failing for all databases [migrated]

Here is the error message in its entirety: Failed:(-1073548784) Executing the query "BACKUP DATABASE [MCM] TO DISK = N'F:\Backup\MCM\M..." failed with the following error: "BACKUP DATABASE is ...
1
vote
3answers
44 views

Logon attempts - Tons of failure audits in Event Viewer on Domain Controller (Server 2003)

This is what the event looks like, under Security logs. There are tons of them. Is someone trying to brute force the network? This server is also used as a terminal services server.. Thanks any advice ...
0
votes
0answers
54 views

Event_ID 4625 Failed Logon on WinServ2012 Ess

I have been trying to wrap my head around this for a whil, but can't seem to find a solution. I have seen many alike questions here and in other fora, but none match my situation. All other threads ...
4
votes
1answer
903 views

Proliant DL380 G7 won't boot, solid amber power LED

I have a problem with an HP Proliant DL380 G7 that leaves me without much in the way of troubleshooting approaches. This server will not boot. It was stored in a datacenter, and I went to retrieve it ...
1
vote
1answer
227 views

Netdom Join Failed To Complete Successfully

I have two servers on VMWare. One is a standard install of Server 2008 r2 and the other is Server 2008 core. Server 2008's IP is: 192.168.186.135 and computer name is: SERVER01. This is a domain ...
0
votes
1answer
2k views

NGINX connect() to unix:/var/run/php-fpm/vhost.sock failed

I use Centos 6.5 (64bit) with Nginx, PHP-FPM. Nginx with fastcgi connect to PHP-FPM using unix domain socket. When I place the socket in a directory with proper permission, it's ok. However when I ...
0
votes
2answers
291 views

Dell RAID1 Pred Fail Yes

I have a server with RAID 1 configured that was running too slow.. some applications does not even run. I entered SAS Config. Utility and I checked that RAID 1 was in status 'not synced', but I was ...
1
vote
0answers
117 views

Openvpn-server: Execute a script when on a failed connection?

Good morning, I was wondering if It was possible to setup something to execute a script when someone tried to connect but the TLS check failed (When someone who is not supposed to connected try to┬░ ...
2
votes
2answers
622 views

Server 2012 explorer.exe missing after failed patch

This post is a last-ditch effort for ideas. Windows Server 2012 64-bit. Dedicated hardware. On reboot, the pre-login screen reports failed patches and attempts recovery. When I log in, the ...
0
votes
0answers
44 views

OpenLDAP SQL backend failing

I'm running OpenLDAP with a SQL (Oracle) backend. This works fine with OpenLDAP 2.3 but after upgrading to 2.4.38 it fails with an error that is not helpful at all: 52d3ec0c ...
0
votes
1answer
81 views

Strato VM stops connecting via SSH after reboot

I have a virtual machine by strato. After rebooting VM can't access via ssh. Strato has a Recovery Manager which keeps the recovery sytem under /repair. How should I start to debug the issue which ...
0
votes
1answer
222 views

sendmail restart fail [exim abandoned: unknown,malformed, or incomplete option -L]

When I restart Sendmail services, I see the following: [root@]# service sendmail restart Shutting down sm-client: [FAILED] Shutting down sendmail: ...
0
votes
1answer
155 views

Postfix can't write queue file

We had a problem with our mailserver lately: Setup: Server with Raid 1 running XenServer VM with Mailserver What happend? 1 disk failed Raid-Controller locked the disks so nothing could be ...
0
votes
1answer
556 views

Tomcat 6.0 fails to read symlink symbolic link file

This is what I have my /tomcat/conf/context.xml <Context> <Resource name="jdbc/black" driverClassName="oracle.jdbc.OracleDriver" auth="Container" ...
0
votes
1answer
969 views

Failed to restart Apache server

I'm trying to restart Apache through Plesk. When I click "Restart", i'm getting the following message. Error: Unable to make action: Unable to manage service by apache_control_adapter: Service ...
0
votes
2answers
354 views

Setting up LVM Volume Groups… hang

My Debian 7 System dosn't boot anymore. The boot stop with a kernel message like thisMy Debian 7 System dosn't boot anymore. The boot stop with a kernel message like this: [.....] Setting up LVM ...
0
votes
0answers
325 views

Varnish fails to start. Running VCC-compiler failed without a compiler error

EDIT: System ran out of disk space so the compiler couldnt create the files. The output of varnishd doesnt tell you this. Always check your disk quota if you get weird errors with no obvious reason ...
0
votes
1answer
809 views

What to check after a linux server crashes?

My linux server (debian 5) stalled and had to be rebooted. Please advise what to check in order to find out what happened. Usual suspects like /var/log/messages, syslog, and kern.log. Could you give ...
0
votes
1answer
214 views

VB6 application backup using SQL 2005 suddenly failing

We have a windows server 2003 R2 machine running MSSQL 2005, and our XP workstations all run a VB6 application which calls the SQL backup utility to backup a 700 Mb database. A couple of weeks ago all ...
-4
votes
1answer
320 views

start of dhcp failed on centos [closed]

i try to config DHCP on centos. when i start service by #service dhcpd restart it failed. the result of #tail -f /var/log/messages : Dec 31 19:26:31 localhost dhcpd: exiting. Dec 31 19:27:04 ...
-1
votes
1answer
578 views

Can't restart /etc/init.d/apache2 restart = failed

After installing openssl ssl-cert and setting everything up as described in the tutorial, I can't restart my apache2. I get the following error: Here is the error.log: ...
0
votes
0answers
237 views

ssl certification

Using SSL certification, I created all the keys and specified path of the keys in 000-default in sites-enabled. After that I restarted the apache2. Peer reports failure of signature verification or ...
5
votes
2answers
1k views

csync2 ERROR: Connection to remote host failed

I was unable to find any articles to answer this question, so my best bet was to post this here: Scenario We have 2x application servers in production hosting a PHP website and I would like some ...
4
votes
3answers
857 views

mdadm RAID 5 Failed with 2 Drives while rebuilding

I have a RAID 5 array with 3 Disks (sdb sdc sdd) Over last weekend I was prompted that sdd had failed. so replaced the drive, added it back into the array and let it rebuild (1.5TB) It stopped at ...
1
vote
2answers
1k views

MSA20 RAID5 recovery failure due to URE on another disk

I have MSA20 with one disk array on 12 disks and 3 LUNs on it (each raid 5). A few days ago one disk in one of the LUNs was failed and I replaced it. But raid5 recovering failed at 13% and I see in ...
0
votes
2answers
374 views

Deactivate dead OCS 2007 R2 Edge Server?

I'm having a surprising issue where our old OCS 2007 R2 Edge server died of hardware failure (no backup) in the middle of our move to Lync. How can I forcefully remove the Edge server from the ...
1
vote
1answer
1k views

prevent filesystem from entering read-only mode

I have found that my server's filesystem is continuously entering read-only mode. There have been some issues with the raid1 array, but I have removed the bad disk from the array. However, it is ...
0
votes
2answers
537 views

RAID 1 disk is marked as Spare after replacement

one of two disks in my RAID 1 died so I replaced it. When new disk has been added to array the sync process started and few minutes later it has become a Spare. How can I "force" the disk to be a ...
1
vote
0answers
402 views

linux /dev/sd? read failed

I couldn't find the answer to this anywhere, so I'm posting this in the hope it helps someone else... My scenario was linux system with an external drive that was connected (and mounted) was suddenly ...
0
votes
4answers
6k views

How to configure MS SQL Server 2008 R2 (login failed for user)?

I want to connect to database with such connection string: connectionString="Data Source=111.111.111.111;Initial Catalog=test;User ID=user;Password=password" So, I have default SQL Server ...
1
vote
1answer
963 views

Exchange 2003 - Message delievery fails

I am having issues with sending mail to specifics domains. The bounce back message is: "Could not deliver the message in the time limit specified. Please retry or contact your administrator." ...
1
vote
1answer
5k views

SBS 2008 - VSS Backup

Errors: Windows event Log - Backup started at '5/5/2011 12:34:07 AM' failed as Volume Shadow copy operation failed for backup volumes with following error code '2155348129'. Please rerun backup once ...
-3
votes
1answer
434 views

tcp connection refused

I am getting following error when running a program 2011/07/06 18:21:08 stat http error: dial tcp localhost:3179: dial tcp 127.0.0.1:3179: connection refused 2011/07/06 18:21:08 Error putting file: ...
1
vote
1answer
353 views

Windows 7 domain join fails

Here is the scenario: I have several(17) Windows 7 machines joined to a Samba domain. We have a situation where the Win 7 machines need to be renamed. To accomplish this this is the procedure I ...
2
votes
1answer
269 views

Why does my ReadyNas 4200 have a constant beep post disk failure

Went to check on a high pitched constant beep coming from the server room and discovered that all the LED lights on the disks were black except one which had a constant green. Post a Re-boot nothing ...
0
votes
2answers
11k views

iperf connect failed: Connection refused

iperf -c 192.168.3.2 -i 2 connect failed: Connection refused 3.2 is another machine. I think the port might be blocked. How can I make this work?
1
vote
1answer
86 views

is there any problem with my server

Below is a Munin Service Monitor screenshot for netstat by day which have a lot of failed connection. so I need to know is this a serious issue?
0
votes
1answer
1k views

Why does this login fail for user 'Servername\Guest'?

I install SQL Server 2005 EXPRESS edition on one computer, Computer Name = 'MyServe' and Database name='MyDB',take it as database server. it is configured as both Database and Windows Authentication ...
0
votes
3answers
3k views

HP Smart Array; Is it possible to convert Raid1 to Raid0 by dropping a failed drive?

I have a server that was running two 60GB drives as a logical RAID1. At some point the second drive was physically removed and the logical drive has been in "Interim Recovery Mode" for several months ...
0
votes
3answers
1k views

how to resolve connection problem at network

i have this problem connection: Unable to complete network request to host "xx.xxx.xx.xxx". Failed to establish a connection. No route to host could not connect to DB can you tell me how to resolve ...
0
votes
2answers
2k views

Login Failed For User PCname/Guest

I'm getting this error message while I'm trying to connect a sql 2008 database which is in another computer.
1
vote
5answers
5k views

Disk failed part way through 3ware RAID 5 rebuild

I have a 3ware 9650SE RAID controller with a RAID 5 array containing 15 Seagate ST31000340NS disks. After noticing ECC errors in the Port 10 drive I replaced it with a spare and began a RAID rebuild. ...
0
votes
2answers
1k views

Automatic services not starting up and it's NOT a Conficker

I have one computer with kinda strange problem. User notified me that all of a sudden some services that used to work, are not starting anymore. Those include: AU, Computer Browser, DHCP Client, ...
1
vote
1answer
567 views

RAID Controller Acting Weird with a New Hard Drive

(Not sure on the model at the moment will update once I know) So we had a a RAID 5 that had two hard drives fail at the same time. Positions 0 and and 1 are labeled as "online". Positions 2 and 3 ...
1
vote
1answer
2k views

Volume Rebuild Failure after disk replacement in HP MSA1500/MSA20

I have a historically flaky MSA1500 with 2xMSA20 enclosures attached. Recently a disk failed in one of the enclosures. The LCD display reports that interim state recovery for all volumes was ...
1
vote
1answer
1k views

ESXi 4 failed to find boot device

I had exsi 3.5 running just fine, the upgrade to 4 failed ( i thought it would so everything is backed up ). but it did boot just could not import the data store So i did a fresh install of ESXi 4. ...