I'm looking to run 10 GbE over lengths of 5-25m for a research lab and have been shopping for the appropriate optics. I'm guessing a mix of copper direct-attach cables and OM3, OM4, LC/LC multimode ...
We are going to do the cabling in our new office building and we are thinking to lay down 10Gbit cables since we use HP switches that come with 10Gbit ethernet ports. We will also lay down few fiber ...
I am attempting to set up a server with a total of four single-mode fiber ports - two need to be at least 1Gb and two must be 10Gb. I have found a variety of 10Gb single-mode fiber network adapters ...
I am putting a Dell server together, more specifically R720. I have to select the correct Host Bus Adapter. This HBA on R710 will connect to a storage device. I am confused between these two: QLogic ...
We have got some old 62.5um single-mode fiber links in our building. Network people told me, that Cisco 10GBASE-LRM with Cisco mode conditioning patch cables works fine on those cables and provides a ...
Are there solutions that can combine gigabit ethernet, 10gig ethernet, and fiber channel in a single device?
We currently have Brocade 200E fiber switches, connecting 2 EMC CLARiiONs to 4 VMware ESXi hosts. We are looking into new storage options using iSCSI with our existing ethernet network, including the ...
An industrial site needs to link 3 seperate areas in a building in such a way that all the switches are on the same network and sharing the same wan link. The wan link will only be coming in from one ...