I have a server running Nexenta with a QLogic QLE2460 in target mode. This works great. My problem is that with that I only get 1 port worth of speed (4gbps) to my switch. How can I increase the ...
We recently replaced a failed controller in an AL connected RAID. I wasn't the one that replaced the controller, but apparently when the new controller was installed something weird happened with the ...
We are trying to set up some virtual Fibre Channel HBA's in Solaris. This seems to be possible with NPIV. Creating NPIV's in a Solaris global zone works fine, but passing that NPIV to a zone didn't ...
I've got IP over FC working, and have the HBA (QLogic QLA2340) connected to a router with a DHCP server on it. However, whenever I do a: ifconfig fcip0 dhcp start I get: ifconfig: fcip0 wait timed ...
I've just built a small NAS/SAN box and am doing some testing with it. Configuration is: 2GB RAM 2x Opteron 265s Iwill DK8N 5x500GB SATA drives (1 spare, rest mirrored) = 1TB usable space Emulex ...
I'm currently trying to set up a small storage system as a fibre channel target. This is for testing, so I'm currently using Solaris (Nexenta) and a QLogic QLA2340 HBA. For some reason, the qlc and ...