Fibre-channel is a communications protocol widely used in storage networks. It's most widely deployed in enterprise SAN environments, where large amounts of storage need to be shared amongst a number of different hosts, potentially over longer distances. The protocol is primarily used over fibre ...
I have 2 systems, with a Broadcom BCM5701 and a LSI7202p, of which are connected with a LC->SC cable. The cards are properly detected in Linux, however I wish to set up IP over FC. I've read online ...
My Server went into a faulty state since the database could not write on the partition. I found out that the partition went into Read Only mode. Finally to fix it, I had to do a hard reboot. Linux ...
You probably all know the relatively simple RAID boxes exporting a bunch of SATA disks as one big drive via FC, SAS or iSCSI, like the HP StorageWorks MSA2000, Infortrends EonStore series or many ...
I'm hoping that this will be useful for more people than just me. Right now I've got a fibre channel switch, a NetApp filer, and some servers running Oracle. All of the servers can see the same LUNs ...
On my VMX5300, I have created LUNs, configured hosts etc. Mounting LUNs in my ESXi is very simple, ESXi host discovered new FC device and with a few clicks I was able to mount new FC storage. On ...