I have 200B Fortigate unit with 2 internet WAN connections. I also have a remote site which I'm connected to via IPSEC VPN through WAN1. This site has only one GW IP address. I'd also like to setup a ...
First let me start off that I'm not very knowledgeable when it comes to networking so some terms what not may be over my head. I just know enough to get around. So all traffic goes through the WAN 1 ...
IPSEC tunnel Fortinet Transparent Mode to inside Fortinet firewall in NAT Mode does not respond to incomming traffic
I have 2 fortinet firewalls (fully patched); fw1 is providing an IPSEC tunnel in transparent mode. beneath this firewall is a fw2, a NAT firewall with a VIP address that has been confirmed to work. ...