FreeBSD is an advanced operating system for a variety of architectures. It is derived from BSD, the version of UNIX® developed at the University of California, Berkeley; and is developed and maintained by a large team of individuals. It is a complete Operating System, including the kernel, drivers, ...

learn more… | top users | synonyms

2
votes
1answer
372 views

FreeBSD vinum striped (RAID0) volume - performance issues

I've experimented with different striped volumes in vinum under FreeBSD 8.2-release. I have current hardware (Intel i5 processor, adequate MB and 8GB RAM). My test-setup consists of 2 or 4 disks in a ...
1
vote
1answer
729 views

MongoDB on FreeBSD

We are currently using MongoDB 2.0.0 on MacOS but our servers are running FreeBSD. The most recent port of MongoDB is the 1.8.3 version. I have tried to compile the 2.0.0 by hand but I came across ...
2
votes
1answer
262 views

Move data from root ZFS into child filesystem

I have a zpool (pool verion 13, FS version 3, called tank0) with about 2.5TB of data in the root of the pool (i.e. directly in /mnt/tank0). OS is FreeBSD, actually FreeNAS version 0.7.2. I would like ...
0
votes
2answers
574 views

Using FreeBSD to tunnel IPv6 over IPv4 WAN

On a WAN I have 5 different locations connected by point to point T1s via Cisco 2801s, with one central location routing each location to all the others, sort of a star configuration. The routers' ...
2
votes
1answer
4k views

Is it possible to restart a supermicro kvm with ipmitool? (the kvm not the server)

The KVM on my supermicro motherboard seems to have crashed or is otherwise not answering network requests on it's assigned IP address. I need to try to restart the KVM (not the server). Is this ...
0
votes
2answers
2k views

how to change mysql data directory

I use FreeBSD 8.2, mysql 5.1.58. I want change mysql default directory. I config datadir= /path OR my-data-dir= /path on my.cnf but not done. Note: i permission for /path is 755 and owner mysql:mysql. ...
1
vote
1answer
599 views

Multiple spawn-fcgi instances in rc.conf

I need to run two instances of spawn-fcgi on my FreeBSD 8.2 box - one for PHP and one for Python scripts. I can run them manually like this: /usr/local/bin/spawn-fcgi -a 127.0.0.1 -p 9000 -- /usr/...
1
vote
0answers
2k views

how to force stop/delete a VirtualMachine under XenServer (possible bug)

I was testing XenServer 5.6 100-47101p, I installed four VM's, two FreeBSD and two Windows. After installing the four VM's, I recompiled the VM containing FreeBSD 8.2 i386 kernel to enable/support ...
2
votes
2answers
787 views

handle fork bomb on a virtualized environment XenServer / “FreeBSD jails”

I am used to work with FreeBSD jails but I wanted to give a try to XenServer 5.5 / Vmware ESXI 5, hoping it can really limit resources per VM, after installing a couple of Virtual Machines, I tried to ...
1
vote
0answers
891 views

Freebsd, ipfw sched - config type = QFQ get frozen

I have some freebsd soft-router $uname -r 8.2-STABLE code for ipfw: pipe 50 config bw 70Mbit/s sched 50 config type QFQ queue 502 config sched 50 weight 1 mask dst-ip 0xffffffff queue 501 ...
5
votes
2answers
314 views

Portable firewall rules for Linux and Free/Net/Open/DragonFlyBSD

I need apply the same rules (lists of IPs with allow and drop rules) in firewalls of Linux and *BSD. Do you know some application (CLI) for to convert a list of rules in the specific format of each ...
3
votes
1answer
931 views

Automated installation of FreeBSD

I would like to automate the installation of FreeBSD 8.2 for a project I'm working on. I know the answer to every question in the standard installation, so even a script that just pushes keystrokes ...
7
votes
3answers
16k views

How do I recover from a faulted zpool where one device is OK, but was temporarily offline?

I have a zpool with 4 2TB USB disks in a raidz config: [root@chef /mnt/Chef]# zpool status farcryz1 pool: farcryz1 state: ONLINE scrub: none requested config: NAME STATE READ ...
0
votes
1answer
730 views

PHP Fatal error: Ca ll to undefined function json_encode() ..? [duplicate]

Possible Duplicate: Enable json_decode() on my system Im trying to use json with php and i keep getting the error "PHP Fatal error: Ca ll to undefined function json_encode()". I am using php ...
1
vote
1answer
2k views

How to debug memc/memcached timeouts with Nginx?

Problem Regular timeouts from the memcached backends in Nginx (see example errors below) Things already tested: it occurs both on local and remote memcached servers so the network can't be the ...
0
votes
2answers
2k views

Apache: Failed to enable the 'httpready' Accept Filter

So kernel modules are loaded!! what goes on?? accf_http_load="YES" accf_data_load="YES" trying to load ... dev# kldload accf_data.ko kldload: can't load accf_data.ko: File exists and still ...
2
votes
2answers
2k views

Installing embedded pfsense, stuck at boot loader

I am trying to install pfSense embedded image 1.2.3 RC1 onto a CF card. The box looks like it is ready to boot, but gets stuck at "Loading /boot/defaults/loader.conf" followed by "/". Can anyone ...
0
votes
1answer
45 views

CVS does not run properly as nonroot user

I get an "rejected acces to DIR for user USER" message, when I try an "cvs login" to my local cvs... BUT everything works just fine, when cvs is set to run as root... Im running FreeBSD 7.2, here is ...
2
votes
1answer
200 views

Email Address Generator

I'm developing a service which requires me to generate a new email for every "sign up." For example, person000@name.com, person001@name.com, person002@name.com, and so forth. My first attempt was ...
0
votes
1answer
115 views

amazon ec2 instance stopped being accessible

Up until this morning, I had a website running on ec2 (freeBSD, ami-8cce3fe5, running django/uwsgi/nginx), with an elastic ip of 50.19.97.56 . The site was being served, and I could ssh into the ...
35
votes
5answers
8k views

ZFS on FreeBSD: recovery from data corruption

I have several TBs of very valuable personal data in a zpool which I can not access due to data corruption. The pool was originally set up back in 2009 or so on a FreeBSD 7.2 system running inside a ...
0
votes
1answer
607 views

how to view history command for user root

On FreeBSD 8.1 how to view history command for user root. Detail many sesion , because user root use by 3 people system admin. Thank all
1
vote
1answer
190 views

ZFS on FreeBSD: upgrade from 7.x to 8.2?

I set up a ZFS pool of 8 harddrives under FreeBSD 7.2 a couple of years ago. This pool is storing data, the OS itself runs on a separate harddrive with conventional UFS2. Now I am thinking about ...
0
votes
1answer
467 views

How to combine partitions in FreeBSD

I have FreeBSD 8.3, two HDD drive. 1 HDD /var partition 80GB 2 HDD /var partition 300Mb How they can be combined into single /var partition like Linux LVM?
2
votes
2answers
267 views

Sharing distfiles between FreeBSD, OpenBSD, and Gentoo

Currently I have a few FreeBSD servers with one of them acting as build box sharing its /usr/ports and /usr/ports/distfiles (as separate file systems) through NFS. Recently I've added OpenBSD and ...
8
votes
2answers
1k views

Is it safe to replicate from Solaris ZFS to FreeBSD ZFS?

Is it safe to replicate from a Solaris 10 ZFS v22 to a FreeBSD 8.3 ZFS v28? Are there someone that have done this with specific versions of ZFS, where it worked perfectly?
2
votes
0answers
714 views

FreeBSD istgt - how to limit iscsi target discoverability to IP address

How can I setup an ISCSI target that is only visible to a certain IP address? For example, if a client runs iscsiadm discover from 10.1.1.130, I only want target iqn.2011-03.domain.org.istgt.ded130 ...
8
votes
4answers
4k views

Why can't I ping an address on the loopback device under FreeBSD?

From Wikipedia: The most commonly used IP address on the loopback device is 127.0.0.1 for IPv4, although any address in the range 127.0.0.0 to 127.255.255.255 is mapped to it. This is not ...
-2
votes
2answers
344 views

I need an affordable, mass storage system. For under £1000. Possible? [closed]

I've got a budget of £1000, but really I'd like it for less than that. I want to set up a 20TB+ storage system for a project I'm working on that will use roughly 15TB, and the rest for storing photos, ...
1
vote
1answer
415 views

Installing PostgreSQL 9.0 on FreeBSD

My installation of databases/postgresql90-client fails on a FreeBSD box. The installation blocks on configure, at the following step (while CPU usage tops 100%): checking thread safety of required ...
2
votes
2answers
287 views

Upgrading old FreeBSD system

I have a very old FreeBSD server at work. atlas:~>uname -mprs FreeBSD 6.4-RELEASE-p8 i386 i386 I'd like to update it. I'm quite familiar and comfortable with the "make world" methods. I've just ...
0
votes
1answer
167 views

choise option when install syscp on freebsd

I install syscp on freeport (install from port). Guide me install syscp with choise option (ex: remover ftp or apache on syscp because I intalled ftp server)
3
votes
1answer
796 views

Keeping freebsd up to date with only binary packages

Here's what I want: I want to install RELEASE-8.2, and want to keep the system and packages up to date with security patches only. I want to avoid ports b/c I do not want my machines to start ...
1
vote
1answer
1k views

postfix logs missing (freebsd)

I'm trying to debug an unfamiliar mail server and I can't find any logs for postfix. In the documentation it says: Postfix logs all failed and successful deliveries to a logfile. The file is usually ...
1
vote
3answers
311 views

Syslogd: translate facility on log messages going to a server

I want to send some log messages out to a remote log server, and change the facility on them to a configured value so the log server can tell more easily that they came from my hardware. That is, all ...
2
votes
1answer
89 views

Apache PATH very long with duplicate entries

When showing phpinfo() the sheet show that Apache PATH enviroment variable is very very long and with duplicate entries? Why is that? And how to fix? /bin:/usr/bin:/sbin:/usr/sbin:/usr/local/bin:/usr/...
0
votes
1answer
1k views

How to redirect request to second host if the first one is off-line?

I have two hosts in different networks (different ISPs). I would like to redirect all traffic to second host only in case if first one is off-line (unexpectedly). What are technical solutions to ...
0
votes
1answer
885 views

M0n0wall won't pass traffic on different LAN subnets unless “Bypass firewall rules” is checked

I have a working configuration, but a question is bugging me. The question centers around having multiple subnets on a single interface. LAN: 10.10.10.1/24 OpenVPN Server LAN IP: 10.10.10.250 ...
8
votes
4answers
2k views

OpenBSD/FreeBSD Firewall w/ GUI that is compatible with Intel 82574L Gigabit LAN NICs

I recently purchased a server to run m0n0wall or pfSense but I've learned since then that both of these firewall products are based on versions of FreeBSD which weren't yet compatible with the NICs in ...
2
votes
2answers
687 views

Would NetBSD be a good choice for a web server?

I've the choice of crafting a NetBSD image for a Xen VPS host, and was just wanting to play around as I like BSD and wished to use it for my general web hosting. I will be hosting a low-mid traffic ...
0
votes
1answer
191 views

need help with resolv.conf

my freebsd server runs a nameserver. the nameserver has information about a single domain. a common, I think, setup for a dedicated server. I also have an upstream nameserver that i would like to ...
0
votes
1answer
575 views

Why can't add a hot spare in freebsd? Can anybody help me fix it?

Why can't add a hot spare? # mfiutil add e1:s1 mfid0 mfiutil: Drive 1 is not available I found the reason is e1:s1 is marked online, it must be Marked as an unconfigured good drive, and to mark ...
0
votes
3answers
830 views

FreeBSD and Linux VLAN

I have a LAN and i need to create a LAB with three VLAN on my boxes, Linux and FreeBSD. Well i create a VLAN 1 on the linux box as follow: sudo vconfig add eth0 1 sudo ifconfig eth0.1 inet6 add 2001:...
4
votes
1answer
1k views

Reducing ZFS stream size for offsite backup

NOTE: My understanding of this question has changed significantly since I first asked it (see Edit 2 below) but I've left the original version intact. We've put together an offsite backup system (...
0
votes
1answer
759 views

FreeBSD 8.2 + Apache 2.2 + mod_auth_pam2: unable to authenticate

I've installed Apache 2.2 and mod_auth_pam2 from ports, but I can't get local UNIX authentication to work. When I access the protected part of my local website, I do get the authentication request, ...
1
vote
1answer
794 views

How to get the CentOS 5.6 alsa drivers which will really work with one shot, without any internet

I have one chance to install this in my server on site. Server that i am running is CentOS 5.6 (Dell R310, RAID1) where i need to install alsa-sound driver so that anything related to audio recording ...
1
vote
3answers
1k views

MySQL is 2 hours behind system time

Have a FreeBSD box with MySQL server on it. The system time is correct - For Denmark (Europe/Copenhagen) currently summertime. # date Fri Jun 17 12:09:56 CEST 2011 The MySQL server has timezone ...
1
vote
1answer
340 views

FreeBSD Dump with cURL/rsync

I'm trying to create a backup script using FreeBSD's dump to take a snapshot of a filesystem, but instead of storing the snapshot on disk I want to pipe the output from dump into cURL or rsync so its ...
1
vote
3answers
710 views

Most secure webserver software

I was reading about Hiawatha and I was wondering if really Freebsd+Hiawatha could be considered safer than Linux+Lighttpd or any other webserver. Moreover, if you were to have to host a very ...
38
votes
1answer
2k views

I am going to chop the FreeBSD automounter into little pieces and boil them in oil

I am trying to expose a hierarchy of home directories to a number of FreeBSD jails. The home directories are configured such that each is a unique ZFS dataset. The jails are used for development ...