FreeBSD is an advanced operating system for a variety of architectures. It is derived from BSD, the version of UNIX® developed at the University of California, Berkeley; and is developed and maintained by a large team of individuals. It is a complete Operating System, including the kernel, drivers, ...

learn more… | top users | synonyms

0
votes
2answers
75 views

Recompiling FreeBSD-10 release from SVN source

I run 10.0-RELEASE on my server and I'm wondering something. If I do buildworld with official source from svn, will i be able to use freebsd-update to upgrade in the future or I have to settle with ...
1
vote
2answers
284 views

Bridged Networking with bhyve and FreeBSD Guests does not work

I have a FreeBSD10 host with bhyve and the following IP-configuration in rc.conf: ifconfig_igb0="inet X.X.X.146 netmask 255.255.255.0 broadcast X.X.X.255" defaultrouter="X.X.X.254" ...
6
votes
2answers
219 views

Conflicting information about the running kernel version in FreeBSD

I asked a related question about uname before and now want to ask from another angle, because the following simple yet obvious conflicting outputs may mean there is something many people did not think ...
0
votes
0answers
143 views

webmin says squid cache directory has not been initialized

I am using webmin on FreeBSD 9.2, when I goto the squid panel it tells me Your Squid cache directory /var/squid/cache/squid has not been initialized.This must be done before Squid can be run. It ...
3
votes
2answers
94 views

Mimicking Google's Persistent Disks — Is this a logical FreeBSD disaster recovery strategy?

I am looking into FreeBSD to provide a more comprehensive backup and disaster recovery strategy for database servers. Ideally I want to mimic what google is doing with "Persistent disks" ...
0
votes
2answers
842 views

Can the Dell PowerEdge T320 boot from a USB stick in hard drive emulation mode?

I am trying to install FreeNAS on a Dell PowerEdge T320. I've followed the instructions here (http://doc.freenas.org/index.php/Burning_an_IMG_File) to write the .img file to four different USB sticks ...
0
votes
3answers
101 views

How to install deleted port on FreeBSD

I am maintaining a code base that depends on Postgis 1.5. My local dev VM is running FreeBSD 9.2. I have recently been tinkering with packages and inadvertently deleted postgis, so I attempted to ...
4
votes
1answer
1k views

How to integrate Active Directory with FreeBSD 10.0 using security/sssd?

What are the required steps to authenticate users from an Active Directory running on Windows Server 2012 R2 in FreeBSD 10.0 using sssd with the AD backend with Kerberos TGT working?
3
votes
1answer
254 views

Understanding PAM authentication procedure on FreeBSD with security/sssd

I'm trying to understand what's behaving errantly on my PAM configuration on FreeBSD 10.0 The machine is configured with two different authentication realms, one is the default Unix authentication ...
0
votes
1answer
143 views

correctly setup PF with loopback interfaces for nginx proxy

I am trying to run couple of freebsd jails for my web server and application server, which is running node.js I have one network card (igb0) with a custom loopback interface (lo666) for which i have ...
0
votes
1answer
88 views

Server suddenly stops responding and then resumes an hour later

My FreeBSD server had been perfectly working for over 2 years without any major changes to the system. Recently I installed SSL certificate using Apache's mod_ssl, and after 10 days of running fine ...
1
vote
2answers
505 views

Cannot authenticate in Active Directory using security/sssd from FreeBSD ports

I'm trying to implement security/sssd port in a FreeBSD 10.0 system. My main goal is to authenticate users from Active Directory running on Windows Server 2012 R2. I would like to know if anyone had ...
-1
votes
1answer
126 views

OpenLDAP modify member is not allowed

I am Struggeling with my LDAP attributes. I already created a few test users and groups, but I am unable to add users to the groups. #!DATE 2014-05-22T11:48:16.324 #!ERROR [LDAP: error code 65 - ...
0
votes
0answers
53 views

add a directory inside freebsd jail

Not sure if this is correct, but i have now installed freebsd 10 on top of ZFS with jails and have created a jail for Mongodb. For the data files I used the following: zfs create -o atime=off \ ...
3
votes
2answers
672 views

mounting ZFS zvol snapshot locally gives “Invalid argument”

I'm trying to mount a snapshot of a ZFS zvol. The zvol should have a ext2 partition on it (as evidenced by the CentOS VM to which the zvol is currently shared by iSCSI): [root@test-vm ~]# file - ...
0
votes
0answers
51 views

FreeBSD routing for multiple subnets

I have to access a network 10.1.0.0/16 through a gateway 10.4.0.2. I issue the command: route add -net 10.1.0.0/16 10.4.0.2 The machine's IP address where I doing this is 10.4.0.22 and it's default ...
2
votes
0answers
209 views

Unix nslcd login with sAMAccountName and/or userPrincipalName from Active Directory

I'm trying to setup authentication from Active Directory in FreeBSD 10.0 using nslcd (nss-pam-ldapd-sasl package) and would like to allow both sAMAccountName and userPrincipalName as valid login ...
1
vote
2answers
825 views

FreeBSD default MySQL basedir, port, etc., for my.cnf

I'm working on a FreeBSD 9.2 server and have run mysqltuner.pl to check the memory and cache needs of MySQL. Now I need to add a my.cnf file to FreeBSD so it uses that instead of the auto cnf file. I ...
0
votes
1answer
238 views

FreeBSD jail with IPFW with loopback - unable to connect loopback interface

I am trying to configure a one IP jail with loopback interface, but I am unsure how to configure the IPFW rules to allow traffic to pass between the jail and the network card on the server. I have ...
3
votes
1answer
36 views

what exactly does fsck do under the covers (for UFS)?

If a computer crashes then the filesystem is an inconsistent state. What exactly is fsck(8) doing to restore to a usable filesystem? Is there a backup table? Is it cross-checking metadata? ...
2
votes
1answer
92 views

How to recover root password?

I have a FreeBSD box which I forgot the root password to. I do have physical access, so I can reboot the box if I need to. How do I reset my password?
1
vote
1answer
336 views

Setup ZFS on freeBSD from bsd-rescue

I have a server from OVH and have the following procedure of setting ZFS on FreeBSD10 on OVH server following the https://wiki.freebsd.org/RootOnZFS/GPTZFSBoot/Mirror Creating a bootable ZFS ...
1
vote
1answer
89 views

configure single /32 ip address to FreeBSD server

Our upstream provider assigned us a single /32 ip address. How can we configure our FreeBSd server to use it? So far we have this in /etc/rc.conf: ifconfig_em0="inet a.b.c.d/32 netmask ...
1
vote
1answer
154 views

VMDK File Growing After copying it using CP?

Using FreeBSD and a mounted NetApp NFS Share. I'm trying to copy a file FROM: localdisk/something.vmdk (size 527776 kilobytes) TO: nfsmount/copy-something.vmdk (size 533168 kilobytes) But it seems ...
1
vote
1answer
234 views

PF: Block all, but one subnet firewall rule?

I'm trying to do something that I thought would be relatively simple: Block all the traffic to a test server, other than my company's subnet. I've tried things along these lines (111.111.0.0 is my ...
1
vote
1answer
68 views

Moving MRTG Installation

We have an MRTG installation that has been working for the last 3 years, I noticed that after 18 or so months the data would start recording a fresh. Now I wanted to transfer the installation and all ...
3
votes
1answer
417 views

where does uname get version number in FreeBSD RELEASE?

I installed FreeBSD 9.1-RELEASE, after binary upgrading to 9.2-RELEASE using freebsd-update, all files I checked are correctly in 9.2-RELEASE-p4. For example: the kernel contains the new version: ...
-1
votes
1answer
50 views

How to install GNU on FreeBsd 10? [closed]

i have error configure: error: GNU make is required! and i have error $ cd /usr/ports/devel/gmake/ cd: /usr/ports/devel/gmake/: No such file or directory How to install GNU on FreeBsd 10?
0
votes
1answer
109 views

WARNING: failed to start git_daemon

I follow this http://bin63.com/how-to-setup-a-git-repository-on-freebsd tutorial to the letter and edit: /etc/rc.conf with: git_daemon_enable="YES" git_daemon_directory="/git" ...
5
votes
1answer
500 views

Redis connection issue

We are currently experiencing a lot of Redis errors with the message Unable to connect: read error on connection, trying next server We run Redis on FreeBSD using PHP Redis and we have a hard ...
2
votes
1answer
160 views

FreeBSD pkg database deleted

after resolving repeated crashes on startup with fsck I noticed some files were removed, one of them was the sqlite pkg database, so now when I run for example pkg install somepackage I get this erro: ...
0
votes
1answer
198 views

apache taking old openssl libraries when doing apachectl graceful

Due to heartbleed vulnerability I have recompiled apache with non vulnerable latest openssl(I had to keep old vulnerable openssl due to some dependency problem). It is running fine and when doing ...
1
vote
1answer
119 views

Increase number of connections per socket

How do I increase the number of connections each socket can accept? I know that you can increase the total number of connections using: # sysctl kern.ipc.somaxconn=4096 But each connection is then ...
2
votes
2answers
87 views

How can I determine what RAIDZ level my volume is using?

I am looking at a ZFS volume on FreeBSD system, and I have no idea what RAIDZ level it is configured at. How can I find out using the ZFS command line or other? I tried "zpool status" already, and ...
0
votes
2answers
98 views

FreeBSD Established Connections Maxing out at 300

We've previously had issues in our environment where it seemed we were reaching FreeBSDs max connection limit. We took action demonstrated by http://nginx.org/en/docs/freebsd_tuning.html and bumped up ...
0
votes
0answers
152 views

FreeBSD with Samba4 share permissions error

I have provisioned a samba4 server on FreeBSD 10 using UFS as a filesystem. However, I cannot seem to manage NTFS permissions for the shares such that roaming profiles can be implemented. My ...
0
votes
0answers
54 views

freebsd: disk i/o utilization statistic by user

Whether there some utils for collect/view statistic about disk I/O utilization by user in FreeBSD? After googling that question i found only sa, but in its manpage is not any information about ...
1
vote
2answers
665 views

Why is my server displaying openssl 0.9.8 when I have openssl1.0.1 installed?

I am creating a test server that is vulnerable to the heartbleed bug. My server is running Apache 2.4 on a FreeBSD VM. By default, FreeBSD seems to have OpenSSL 0.9.8 installed by default. I tried ...
3
votes
1answer
286 views

How do I remove Apache if I installed it from the source tarball?

I installed Apache 2.4 from a source tar, and there seems to be no "make deinstall" or "make uninstall" options in the makefile in the extracted directory. How can I remove the installed Apache server ...
0
votes
0answers
220 views

Proxy outbound connections throught squid

Informations FreeBSD 10.0 Squid 2.7 PF Scenario All the connections need to pass through an external authenticated proxy, so i need to proxy all outbound ftp and http connections through a ...
1
vote
1answer
558 views

Why's Tomcat not responding, but looks normal?

I don't have much info to go on here, looking for ideas as I've run out. I did a server certificate update on our tomcat box (FreeBSD 9.2). After reboot, any connections to it fail immediately (page ...
1
vote
0answers
51 views

emulate shared hosting load

I want to emulate some shared-hosting activity in testing environment. Is particularly interested I/O performance. Need to emulate: many sql queries, http queries, and some additional activity, ...
2
votes
1answer
739 views

Can't boot FreeBSD 10 iso by PXE

I'm trying to boot FreeBSD 10 bootonly iso from with pxelinux and tftp, unfortunately the following error appears during freebsd boot: cd9660 :/dev/iso9660 error :/dev/iso9660/FREEBSD_INSTALL ...
2
votes
1answer
453 views

FreeNAS: “swap_pager: I/O error - pagein failed”

Our FreeNAS server log is constantly filling up with Apr 5 15:13:49 Wheelhouse NAS kernel: swap_pager: I/O error - pagein failed; blkno 524312,size 4096, error 6 Apr 5 15:13:49 Wheelhouse NAS ...
0
votes
2answers
940 views

FreeNAS: “/var: write failed, filesystem is full”

Upon logging into our FreeNAS via shell, it says /var: write failed, filesystem is full So I did > df -h Filesystem Size Used Avail Capacity Mounted on /dev/ufs/FreeNASs2a ...
5
votes
2answers
2k views

Need to replace disk in zpool … confused

I need to replace a bad disk in a zpool on FreeNAS. zpool status shows pool: raid-5x3 state: ONLINE scrub: scrub completed after 15h52m with 0 errors on Sun Mar 30 13:52:46 2014 config: ...
1
vote
2answers
572 views

Need to identify disk in zpool … how?

I need to replace a bad disk in a zpool on FreeNAS. zpool status shows gptid/5fe33556-3ff2-11e2-9437-f46d049aaeca UNAVAIL 0 0 0 cannot open How do I find the serial # of that disk? ...
1
vote
1answer
729 views

MySQL high CPU usage on small website

I have a small website hosted on a dedicated server (FreeBSD 9.2, MySQL 5.6.1 and php 5.5.5). The problem is that MySQL eats a lot of cpu resources even if the website have a few visitors. The ...
1
vote
1answer
61 views

Huge quantity of session files

I have: CPU: 2 x Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz (2600.06-MHz K8-class CPU) 128 GB RAM FreeBSD OS session files stored in RAM each session file is 1...10 kb gc_maxlifetime = 1440 ...
0
votes
0answers
999 views

ZFS import unable to find any pools

I had a ZFS pool -- a mirror containing 2 vdevs -- running on a FreeBSD server. I now have only one of the disks from the mirror, and I am trying to recover files from it. The ZFS data sits in a GPT ...