FreeBSD is an advanced operating system for a variety of architectures. It is derived from BSD, the version of UNIX® developed at the University of California, Berkeley; and is developed and maintained by a large team of individuals. It is a complete Operating System, including the kernel, drivers, ...

learn more… | top users | synonyms

0
votes
1answer
129 views

GPT partition errors on boot - ZFS FreeBSD

My system appears to be running fine and I'm just trying to clean up errors. That said... On boot, I get the following errors for all drives in a 24 disk storage enclosure: GEOM: ...
0
votes
1answer
64 views

forward a single message from queue with sendmail

I have a message in the mail queue which has been deferred because the recipient box is full. The message isn't in my mailbox, just the queue. Is it possible to forward that message to a different ...
0
votes
0answers
33 views

FreeBSD disk device names/targets on LSI SAS9211i (IT)

I have a machine with an LSI SAS card (8 SAS/SATA ports) with 8 drives that were initially named da1-da8. The numbering stayed consecutive (first drive -> da1, scbus3 target 0 lun 0, etc.) until I ...
0
votes
3answers
109 views

My terminal returns ;5A;5D;5B;5C whenever I use CTRL+arrow

I'm using CentOS Linux release 7.0.1406 (Core) and I ssh into following system: $ uname -a FreeBSD X 9.2-RELEASE-p5 FreeBSD 9.2-RELEASE-p5 #0 r265974: Wed May 14 07:57:04 PDT 2014 ...
0
votes
1answer
118 views

nginx php-fpm not fully working

I'm using nginx-1.6.2_1,2 with php5-5.4.36 on: # uname -a FreeBSD X.X.X 9.2-RELEASE-p5 FreeBSD 9.2-RELEASE-p5 #0 r265974: Wed May 14 07:57:04 PDT 2014 root@X.X.X:/usr/obj/usr/src/sys/R610 amd64 ...
0
votes
0answers
74 views

Ipfw forward from table to IP

I try to forward on FreeBSD all requests on port 80,443 from clients in some table to one IP. ipfw add 80 fwd ip from "table(10)" dst-port 80,443 to x.x.x.x:80 So, not working... What i did wrong?
0
votes
0answers
128 views

IMAP proxy setup to allow use of IMAP IDLE?

First-time poster, long-time lurker/reader. Sorry for the obscenely-verbose question...I intended to keep it more concise. Also, sorry about the links not being "actual" links -- I don't have the ...
0
votes
1answer
135 views

UFS wedge : “Out of journal space!” - how to tune? (FreeBSD)

I'm running FreeBSD 9.2p13 with UFS and journaled softupdates. Does anybody know how to tune softupdates journal on UFS? There are no suitable information in handbook, man pages or sysctl ...
0
votes
0answers
77 views

openVPN on another IP

I had a working OpenVPN on my server, and it was working fine, redirecting traffic to the/from the internet, but when i have found that the traffic to the services on this server not routing through ...
0
votes
0answers
257 views

Configuring mod_chat_log for ejabber 14.07 in yaml

I have a trouble in configuring mod_log_chat for ejabber 14.07 on FreeBSD 10. I've compiled mod_log_chat.erl to mod_log_chat.beam add to ejabberd.yml mod_log_chat: path: "/var/log/ejabberd/chat" ...
0
votes
0answers
121 views

zfs raidz can not read from disk

my freebsd 10 server running on zfs raidz. I have a problem with reading files, test dd of=/dev/null if=/tmp/test/1000mb.bin bs=1024k count=1000 953+1 records in 953+1 records out 1000000000 bytes ...
0
votes
1answer
232 views

ports in freebsd jail fetching but not updating

I've created a jail to host my webserver/blog, but when attempting to build any port, I consistently get the message "portsnap: Directory is not writable: /usr/ports". Attached is a screen capture ...
0
votes
0answers
235 views

MySQL exits without any output

Having a strange issue. Some time ago MySQL exited suddenly when I was creating a table (I think), and I shelved the issue until now. It seems to start, but nothing happens and it exits: 141031 ...
0
votes
0answers
158 views

pfsense: break gmirror raid 1 before upgrading

I have a pfsense firewall in an appliance. The disk is using gmirror with RAID 1 setup. Before this, whenever I want to do OS upgrade, I will shut down the appliance, remove it from server rack, open ...
0
votes
0answers
154 views

php-mysqli extension fails as compilation

When I am trying to build the latest php5-mysqli port I get the following errors back: cd /usr/ports/databases/php5-mysqli && make MAKE_JOBS_UNSAFE=yes install clean ...
0
votes
0answers
798 views

SSH server in a FreeNAS jail is not accessible from the local network

I Have a FreeNAS (not sure which version - the one that uses FreeBSD 9.2) setup with a jail that I use for running various tasks. The jail has SSH service enabled in rc.conf, and I can also see the ...
0
votes
0answers
80 views

FreeBSD jail loses network connectivity after some time

I have a Jail on a FreeBSD 9.2 installation on my office network, which I use to run some cron jobs that upload and download stuff from external servers. The cron jobs are configured on the main ...
0
votes
0answers
327 views

Accessing public ip from within freebsd jail with ipf and ipnat

I'm using FreeBSD 9.3 (same issue with 9.2 and 10.0 in test VMs). I have jails running on lo1 10.0.0.x addresses. I use ipf with this config in /etc/ipf.rules: pass in quick on em0 all pass out quick ...
0
votes
0answers
99 views

Intel RAID 1 states changes during install FreeBSD 10

I working on my all servers with FreeBSD 7.x / 8.x on mainboards with Intel RAID 1. I tied to install FreeBSD 10 on machine with Intel Z97 chipset and RAID 1 (mirror). During install process, all RAID ...
0
votes
1answer
224 views

FreeBSD L2TP VPN connection error

I have a L2TP/IPsec VPN server on FreeBSD 10 set as this article. Everything works fine except clients cannot receive packets from outside. Here is the tcpdump result when a connected client tries to ...
0
votes
2answers
2k views

How to change the webgui password in pfsense from a console?

is there any way to change the password of the webgui administrator user in pfsense from my console? Just to mention i didn't locked my self out from the webgui. Regards, ankso
0
votes
0answers
320 views

FreeBSD Ezjail flavour script fails to execute

I'm having some trouble configuring jails on FreeBSD (10.0-RELEASE) with Ezjail (3.4.1). The flavour RC script does not seem to execute on first jail startup. The script is located in ...
0
votes
0answers
173 views

FreeBSD jail (ez-jail) “connect: Operation not permitted” ONLY for endpoints routable from a particular interface when jail is bound to a `bridge`

Edit I answered my original question: basically, binding the jail to a bridge interface was the problem. Now my question is, why is this the case? Is there a way to get it to work with a bridge ...
0
votes
0answers
69 views

OpenLDAP PAM authen does not support SSHA on FreeBSD10

OpenLDAP PAM authen does not support SSHA? Hi everyone, Now, I lost one day to figure out, the reason my FreeBSD10 can not authenticate SSH user via LDAP because pam_ldap and nss_ldap do not support ...
0
votes
0answers
41 views

Will pfctl -sr show ordered rules when using -o profile?

When I enable the -o profile option with pf will pfctl -sr show me the new order of the rules?
0
votes
2answers
703 views

FreeBSD 10: NFS unable to export folder

I am unable to export a folder using NFS. /etc/exports /storage/test -maproot=nobody client /storage/test1 -ro -maproot=nobody client /storage/test2 -ro -maproot=nobody client The first folder ...
0
votes
1answer
78 views

Access Apache22 server installed on guestOS(FreeBSD) from Host(Win7)

(I asked this question on SuperUser 3 days ago and had no answer...) I would like to access my freshly installed apache server (via ports) on my FreeBSD guestOS from Windows 7. So I set my virtual ...
0
votes
0answers
59 views

FreeBSD - How can I let server A get web access via server B over a specific port?

Setup: Server A: FreeBSD 10 - IP: 100.100.100.100 Server B: FreeBSD 9 - IP: 200.200.200.200 Both servers use pf.conf. Desired result: I want server A to be able to get web access (port 80) via ...
0
votes
0answers
580 views

FreeBSD 10 IPFW IPv6

I'm struggling to allow IPv6 connections on my FreeBSD 10 server. I have a working IPv6 connection. But IPFW blocks all the IPv6 traffic. #!/bin/sh # # flush existing rules ipfw -q flush # allow ...
0
votes
1answer
176 views

Piping stream into tar on FreeBSD

I am trying to pipe a tar/gzip archive into tar to decompress it. The script I have is part of a self extracting installer, where my archive is appended to the script. This works fine on linux, and ...
0
votes
1answer
465 views

Setting enviromental variables for login shells under root account in FreeBSD

I am currently in the process of configuring Open Grid Scheduler in FreeBSD. As part of this process I need to set the environmental variableSGE_ROOTas root. To do this I have been experimenting with ...
0
votes
3answers
2k views

Can the Dell PowerEdge T320 boot from a USB stick in hard drive emulation mode?

I am trying to install FreeNAS on a Dell PowerEdge T320. I've followed the instructions here (http://doc.freenas.org/index.php/Burning_an_IMG_File) to write the .img file to four different USB sticks ...
0
votes
1answer
361 views

correctly setup PF with loopback interfaces for nginx proxy

I am trying to run couple of freebsd jails for my web server and application server, which is running node.js I have one network card (igb0) with a custom loopback interface (lo666) for which i have ...
0
votes
1answer
95 views

add a directory inside freebsd jail

Not sure if this is correct, but i have now installed freebsd 10 on top of ZFS with jails and have created a jail for Mongodb. For the data files I used the following: zfs create -o atime=off \ ...
0
votes
0answers
127 views

FreeBSD routing for multiple subnets

I have to access a network 10.1.0.0/16 through a gateway 10.4.0.2. I issue the command: route add -net 10.1.0.0/16 10.4.0.2 The machine's IP address where I doing this is 10.4.0.22 and it's default ...
0
votes
1answer
514 views

FreeBSD jail with IPFW with loopback - unable to connect loopback interface

I am trying to configure a one IP jail with loopback interface, but I am unsure how to configure the IPFW rules to allow traffic to pass between the jail and the network card on the server. I have ...
0
votes
1answer
250 views

WARNING: failed to start git_daemon

I follow this http://bin63.com/how-to-setup-a-git-repository-on-freebsd tutorial to the letter and edit: /etc/rc.conf with: git_daemon_enable="YES" git_daemon_directory="/git" ...
0
votes
2answers
304 views

FreeBSD Established Connections Maxing out at 300

We've previously had issues in our environment where it seemed we were reaching FreeBSDs max connection limit. We took action demonstrated by http://nginx.org/en/docs/freebsd_tuning.html and bumped up ...
0
votes
0answers
4k views

ZFS import unable to find any pools

I had a ZFS pool -- a mirror containing 2 vdevs -- running on a FreeBSD server. I now have only one of the disks from the mirror, and I am trying to recover files from it. The ZFS data sits in a GPT ...
0
votes
1answer
151 views

Apache mod_rewrite - why friendly URL doesn't works with static files?

My configuration to use friendly URL works fine when the destination is a php script, like this: RewriteRule ^products/([a-z0-9-]+)/([0-9]+)/?$ /prod.php?id=$2&name=$1 [NC] But, when I use a ...
0
votes
1answer
48 views

Local file server needs root access to change permissions

The previous developers set up a local Linux file server (FreeNAS 8.1) and while we can log in through the username they provided we do not have root access so we can not change permissions or do ...
0
votes
0answers
204 views

FreeBSD ipnat(8) rdr - not redirecting

I'm using FreeBSD-10.0-RELEASE: root@fx:~ # uname -a FreeBSD fx.alexus.org 10.0-RELEASE FreeBSD 10.0-RELEASE #0 r260789: Thu Jan 16 22:34:59 UTC 2014 ...
0
votes
1answer
96 views

Remotely automate optimization of mysql database

I am not a mysql or sql expert by any means, and not too savy on FreeBSD, either. We have a server that regularly needs one table to have data deleted < a time frame that leaves only 1 month of ...
0
votes
1answer
379 views

How to compile FreeTDS on FreeBSD10.0-64 in a right way

When i try compile freetds-stable from source (today is a 0.91 version) with: ./configure --with-iodbc=/usr/local --with-tdsver=7.2 --disable-libiconv make make install i didn't find the ...
0
votes
0answers
167 views

frebsd-update IDS reports wrong SHA256 on every single file on my system

How come freebsd-update says following on every single file on my file system? # freebsd-update IDS > freebsd-update.IDS # tail -1 freebsd-update.IDS /var/db/mergemaster.mtree has SHA256 hash ...
0
votes
0answers
203 views

Can't install p5-Digest-SHA1 on FreeBSD 8.3

I am trying to instasll rkhunter on a FreeBSD 8.3 box. However, during make install one of the dependencies failed to build: ===> Building package for p5-Digest-SHA1-2.13 Creating package ...
0
votes
1answer
325 views

IPFW Forward outgoing traffic

So i have a single BSD firewall using NATD and IPFW. This firewall has 5 static IP's assigned to it. Using NATD i can easily forward and entire external ip to an internal ip. But when the internal ...
0
votes
1answer
881 views

How to get access to Icinga on Apache 2.4?

I am trying to install Icinga on a FreeBSD 9.1 box with Apache 2.4. I use the Apache config which was provided with the Icinga port. But when i try to access the web frontend, i get the following ...
0
votes
1answer
515 views

Undefined symbol “php_libxml_disable_entity_loader”

I have php5.4 installed.It runs on freebsd server I also use soap.so extension. But when I start php script (new SoapClient) it stopped. Apache logs: tail -f /var/log/httpd-errors.log : ...
0
votes
1answer
358 views

pf not execute udp port specific block rule

The traffic I want to block can be sniffed as below with tcpdump: 19:16:22.391164 IP 95.95.95.95.2036 > 10.10.10.10.443: UDP, length 8192 So I wanted to write a rule block any udp destination ...