FreeBSD is an advanced operating system for a variety of architectures. It is derived from BSD, the version of UNIX® developed at the University of California, Berkeley; and is developed and maintained by a large team of individuals. It is a complete Operating System, including the kernel, drivers, ...

learn more… | top users | synonyms

1
vote
0answers
15 views

FreeBSD snmpd on a single interface [duplicate]

I have a FreeBSD host with multiple IP interfaces. I would like to have snmpd listen on a single private IP interface, but I am getting the following error when trying to start the service. Error ...
7
votes
3answers
16k views

How do I recover from a faulted zpool where one device is OK, but was temporarily offline?

I have a zpool with 4 2TB USB disks in a raidz config: [root@chef /mnt/Chef]# zpool status farcryz1 pool: farcryz1 state: ONLINE scrub: none requested config: NAME STATE READ ...
1
vote
0answers
34 views

FreeBSD Bind locks up, only clue -> in6_ifadd: 2001:~ is already configured

I have an issue where my DNS locks up periodically (about twice a day). All normal and then suddenly denied access to net_if network: error: could not listen on UDP socket: permission denied When ...
0
votes
1answer
463 views

apache taking old openssl libraries when doing apachectl graceful

Due to heartbleed vulnerability I have recompiled apache with non vulnerable latest openssl(I had to keep old vulnerable openssl due to some dependency problem). It is running fine and when doing ...
0
votes
0answers
74 views

NGINIX server is delaying the response by 200ms after receiving ACK from the client

We are running nginx webserver on UBUNTU 12.04 and using ab [Apache bench marking utility] as a client on FREEBSD 8.0. Using ab we are downloading a 512K file from the server. It is observed that ...
0
votes
0answers
28 views

Super confused about possible NAT kerfuffle

I have a PFSense running on a ZBox at the moment - there are 4 Interfaces: LAN 1(192.168.2.0/24) WAN 1(192.168.2.0/24) (I know, same address, but this IF only connects to a modem, everything ...
0
votes
1answer
140 views

mysql won't start on FreeBSD

We recently picked up a client that has a site hosted on a FreeBSD box. The stack is FAMP. Things were chugging along just fine until recently mysql seems to have stopped running. There is no mysql ...
1
vote
1answer
32 views

Is there limit to create ling-aggregation on FreeBSD 10 by default?

I'm new using FreeBSD and one of the things that we need is two link aggregation interfaces. Looking for on Internet I found out that we can put the configuration on /etc/rc.conf. I tried to config my ...
0
votes
1answer
115 views

ezjail: “partially completed upgrade”

I just updated FreeBSD to 10.2 and after trying to update my jails through ezjail I get the following : ezjail-admin update -u Looking up update.FreeBSD.org mirrors... 5 mirrors found. Fetching ...
0
votes
1answer
102 views

FreeNAS Flash Drive Corruption

The flash drive that had FreeNAS on it was unplugged while the system was running. Now when I start the system, I get the following error: GRUB loading . . Welcome to GRUB! error: unknown ...
1
vote
1answer
51 views

RKHunter report: “No hash value found”

I'm getting RKHunter warnings every day when my cron job runs the check. I'm on FreeBSD 10.2 This is the warning I'm getting: Warning: No hash value found for file '/usr/bin/perl' in the 'rkhunter....
8
votes
1answer
8k views

NOQUEUE: reject: RCPT from on freebsd and postfix

I am building a server using this config -> http://www.purplehat.org/?page_id=4 and when trying to test basic email capabilities I get -> NOQUEUE: reject: RCPT from when try to send a test email. ...
2
votes
5answers
748 views

ZFS backup advice with another server

I currently have two servers both have the exact same hardware, disks, etc. One server (server1) is going to be the "main" server. It's basically a server with raidz2 that has SMB shares on it that ...
1
vote
1answer
17k views
4
votes
4answers
3k views

How do I spamtrap with Postfix?

How do I setup spamtraps with Postfix so clients that send to trapped addresses are prevented from sending me more spam?
8
votes
1answer
532 views

ELK Stack (Logstash, Elasticsearch and Kibana) with concurrent remote syslog server?

I'm building a log analyser service to start monitoring mainly our pfSense Firewalls, XenServer Hypervisors, FreeBSD/Linux servers and Windows servers. There's a lot of documentation on the internet ...
0
votes
1answer
177 views

Building Driver for Intel X710-da2 on FreeBSD [closed]

I am trying to build the network driver for Intel X710-da2, which can be downloaded here on FreeBSD 9.3. I followed the Intel README but nevertheless I retrieve the following compile error after ...
0
votes
0answers
47 views

Trying to create one ip subnet in two vlans bridged

The question is am i missing something while creating the bridge between two parts of the same ip subnet? What I am trying to do is to limit local services(by firewall) available to one of ssid's of ...
3
votes
4answers
2k views

How do I non-interactively update FreeBSD system (and ports)?

Essentially, I am looking for a fully silent, non-interactive version of freebsd-update fetch freebsd-update install and portsnap fetch update
1
vote
0answers
37 views

NFSD lock up on FreeNAS 9.3

I have a Dell PowerEdge 2960 running FreeNAS 9.3, and a Dell PowerEdge 1955 Modular Chassis with a 5316M switch. I wanted to get a faster link between the two so I configured a LAGG with LACP over ...
2
votes
1answer
159 views

Mounting submounts of an NFS mount on Fedora 21 vs CentOS 7

I have a FreeBSD NFS server with a mount, say '/mnt', and some mount points within it, say '/mnt/Documents'. When I mount from CentOS 7, the submounts are mounted automatically: # mount -t nfs4 -o ...
0
votes
0answers
40 views

Destroying zfs dataset, migrating data to parent dataset

I have these zfs datasets: pool1 pool1/ds_parent pool1/ds_parent/ds1 pool1/ds_parent/ds2 pool1/ds_other I want to keep all data which is now contained in the datasets ds1 and ds2, but I don't want ...
0
votes
1answer
2k views

Mysql is not running

In my opinion this happens only because of rackspace build (Freebsd 9.1) root@office:/root # uname -a FreeBSD office 9.1-RELEASE-p4 FreeBSD 9.1-RELEASE-p4 #1: Fri Jun 21 04:11:23 UTC 2013 root@...
2
votes
3answers
28k views

How to flush DNS resolver cache on Linux (and FreeBSD)

I am admin for several Linux and FreeBSD servers and here is a problem I have: The servers run a tool that does a lot of DNS queries every minute for the entire network. When it does a query, the ...
1
vote
2answers
1k views

ZFS on enterprise RAID pass-through, and ZFS on FreeBSD root

We've been running ZFS on top of a single hardware RAID on dell poweredge for years. I know most people are against this, but the snapshot/clone, compression and flexible partition of ZFS served us ...
1
vote
1answer
156 views

Permissions issue: why is user nobody needed in my second php-fpm pool?

I am running FreeBSD 10.2 with a custom-compiled Apache 2.4.17 with php-fpm. The default pool ([www], almost a stock php-fpm setup) ran on user/group nobody/nobody. Apache runs on user/group daemon/...
3
votes
0answers
199 views

pfSense Internal Traffic Policy Based Routing

What is the current and correct way to apply policy based routing to pfSense internal traffic (originating from the firewall itself)? Creating a floating rule with the WAN interfaces selected, ...
0
votes
0answers
91 views

My server doesn't respond to ping6

I'm trying to enable ipv6 on my webserver. The server runs FreeBSD 10 and I'd like to enable ipv6 access to my websites. That's the long term goal. The goal here would be at least to have a server ...
2
votes
3answers
5k views

choose the outgoing interface for a default route

I have a FreeBSD 8.0 virtual box with two ethernet interfaces, em0 and em1. em0 is 192.168.1.99 and em1 is 192.168.1.100. Both are "Attached to: Bridged Adapter". When both are up, if I say # route ...
0
votes
2answers
354 views

How can I check the partition name in FreeBSD?

I am currently running my server in the rescue mode, due to the firewall issues. In order to disable the firewall thing I would have to mount the / partition. My problem is that I dont know/remember ...
2
votes
1answer
181 views

Nginx: Tags in Syslog output on wrong position

I'm trying to output the logs of several Nginx servers in FreeBSD jails to the jails' host. I'm using FreeBSD 10 syslog and Nginx 1.7.10. In Nginx (in this case the hostname is web) I have set: ...
0
votes
1answer
51 views

Changes does not take effect without reboot

I am using Pfsense : 2.2.4-RELEASE (i386) I moved the pfsense configuration from one machine to another by full backup export-import afterwards. And the last move was on a fresh pfsense ...
-2
votes
1answer
56 views

How to list all mounted disks and their mount path location on FreeBSD?

On FreeBSD I wish to see all mounted disks and all of their mount locations. For example this shows my disks. [root@freenas] ~# sysctl kern.disks kern.disks: xbd2 xbd1 ada0 [root@freenas] ~# Now I ...
1
vote
0answers
28 views

Simple anti DDoS protection in FreeBSD [duplicate]

I have a lot of request from data centers to my web server on FreeBSD and sometimes it've have a lot of performance problem with my web projects. Adding to IPFW list all IP's data centers is ...
0
votes
1answer
22 views

Unknown why my FreeBSD NAS is synchronizing with another FreeBSD NAS?

I have two FreeBSD (rel 9.3) NAS, I recently took on this new position and found out that these two NAS are synchronizing data (specifically to /mnt/Store folder) but I can't seem to find where/how ...
0
votes
0answers
280 views

PHP exec() Returns 127 When Trying To Run Any Command

I'm an intermediate Linux user (CentOS, some Debian) who is transitioning to FreeBSD (10). Permissions have always been somewhat confusing to me. I've set up a server with PHP-FPM (5.6) and Nginx (1....
9
votes
1answer
536 views

Freebsd change default Internet channel route

I have two Internet channel and Gateway on freebsd. When I switch channel with the command route change default chan2, the command netstat -nr shows changed default route. But traceroute shows that ...
1
vote
2answers
422 views

How to get the attached disk size on FreeBSD

When I attach a disk to FreeBSD I can list any attached disks by doing: [root@freenas] ~# sysctl kern.disks kern.disks: xbd2 xbd1 ada0 [root@freenas] ~# How can I then find out the size of each ...
-1
votes
1answer
67 views

Increase the capacity of a RAIDZ1 vdev on ZFS

I'm running FreeNAS on a Mini-ITX Box at home. I have 3x3TB HDDs in a RAIDZ1 udev. Now I'm running out of space. I have space for one additional HDD in my case. I want to convert the 3x3TB RAIDZ1 into ...
1
vote
1answer
136 views

“Reinstall” FreeBSD using ZFS snapshots

I am using a dedicated server, and unlike on VPS providers or VM machines, getting back to a clean state (untouched, after install) is quite a laborious thing to do (lots of clicking around in a web ...
0
votes
0answers
25 views

FreeBSD's built-in ftpd and awstats

How can I use awstats with the FreeBSD's built-in ftpd's xferlog? Sample lines from /var/log/xferlog (simple syslog): Sep 12 19:05:51 bsd-vps ftpd[35082]: connection from ###.###.###.### Sep 12 19:05:...
1
vote
0answers
181 views

clang does not see gcc installation

I have such a system: uname -a FreeBSD gpskomsa 10.2-RELEASE FreeBSD 10.2-RELEASE #0: Thu Aug 20 18:25:34 VLAT 2015 root@gpskomsa:/usr/obj/usr/src/sys/GENERIC amd64 with default clang: clang -...
2
votes
2answers
722 views

Booting FreeBSD from whole-disk ZFS pool?

I have a FreeBSD fileserver configured with one ZFS pool created from whole disk devices. That is, the pool was created like this: zpool create pool0 raidz ada0 ada1 ada2 This means the disks have ...
2
votes
1answer
156 views

iSCSI: lsscsi lists device but fdisk does not

How do I make freebsd show initiators a mountable target from a zpool? On a fresh install of FreeBSD 10.2 (hostname bohr) I made a zpool named tank with a single vdev which is 2 disks in a mirror; ...
1
vote
0answers
105 views

Missing free space in new zfs raidz2 zpool?

I'm running Nas4Free 10.2.0.2 - Prester (revision 1814) which is based on FreeBSD 10.2-RELEASE-p2 #0 r287260M: Fri Aug 28 18:38:18 CEST 2015. System has 24 GB memory. I've tried with ashift=9 and 12 ...
1
vote
1answer
555 views

FreeBSD VMware and CAM status: SCSI Status Error

I'm running a FreeBSD 10.1-RELEASE-p19 on a VPS (VMware). My ISP is experience a rapid data growth, and these messages spontaneous started to show up in our logs a week ago. Sep 25 09:00:50 srv03 ...
2
votes
1answer
2k views

freenas disc problems - smart error - how to repair zfs raid?

I have troubles with my freenas 9.2.1. It crashed today. Its running a fileserver on zfs jbod raid 2. I'm not sure what exactly causes the problems. The system is booting however reacting pretty slow. ...
0
votes
0answers
97 views

OpenVPN TLS handshake fails on freebsd10

I am trying to configure a new VPN server but the TLS handshake fails. I worked with #openvpn for some time and we narrowed it down to a failure at the server but what exactly, no one has a clue. All ...
0
votes
1answer
2k views

FreeNAS/FreeBSD: How to access status of ZFS volume from jail?

I am trying to set up NRPE to enable remote Nagios monitoring of a new FreeNAS 0.91 system. I mostly have this working. I can connect and inquire about basic information like number of processes, ...
7
votes
2answers
108 views

Setting timezone to UTC in unattended install

In FreeBSD, I'd like to set the timezone to UTC in an unattended way. If I run tzsetup, and select "yes" and "a" in the dialogs, for choosing UTC, I see that there are no /etc/localtime files present. ...