FreeBSD is an advanced operating system for a variety of architectures. It is derived from BSD, the version of UNIX® developed at the University of California, Berkeley; and is developed and maintained by a large team of individuals. It is a complete Operating System, including the kernel, drivers, ...

learn more… | top users | synonyms

1
vote
2answers
1k views

FreeBSD default MySQL basedir, port, etc., for my.cnf

I'm working on a FreeBSD 9.2 server and have run mysqltuner.pl to check the memory and cache needs of MySQL. Now I need to add a my.cnf file to FreeBSD so it uses that instead of the auto cnf file. I ...
3
votes
2answers
794 views

mounting ZFS zvol snapshot locally gives “Invalid argument”

I'm trying to mount a snapshot of a ZFS zvol. The zvol should have a ext2 partition on it (as evidenced by the CentOS VM to which the zvol is currently shared by iSCSI): [root@test-vm ~]# file - ...
0
votes
1answer
160 views

correctly setup PF with loopback interfaces for nginx proxy

I am trying to run couple of freebsd jails for my web server and application server, which is running node.js I have one network card (igb0) with a custom loopback interface (lo666) for which i have ...
1
vote
1answer
554 views

readlink: illegal option — f

Recently the script was working fine, but from some days I'm receiving such message, while running the readlink -f "$0" command: readlink: illegal option -- f usage: readlink [-n] [file ...] I was ...
0
votes
1answer
101 views

Server suddenly stops responding and then resumes an hour later

My FreeBSD server had been perfectly working for over 2 years without any major changes to the system. Recently I installed SSL certificate using Apache's mod_ssl, and after 10 days of running fine ...
0
votes
0answers
55 views

add a directory inside freebsd jail

Not sure if this is correct, but i have now installed freebsd 10 on top of ZFS with jails and have created a jail for Mongodb. For the data files I used the following: zfs create -o atime=off \ ...
0
votes
0answers
54 views

FreeBSD routing for multiple subnets

I have to access a network 10.1.0.0/16 through a gateway 10.4.0.2. I issue the command: route add -net 10.1.0.0/16 10.4.0.2 The machine's IP address where I doing this is 10.4.0.22 and it's default ...
2
votes
0answers
249 views

Unix nslcd login with sAMAccountName and/or userPrincipalName from Active Directory

I'm trying to setup authentication from Active Directory in FreeBSD 10.0 using nslcd (nss-pam-ldapd-sasl package) and would like to allow both sAMAccountName and userPrincipalName as valid login ...
2
votes
1answer
94 views

How to recover root password?

I have a FreeBSD box which I forgot the root password to. I do have physical access, so I can reboot the box if I need to. How do I reset my password?
3
votes
1answer
36 views

what exactly does fsck do under the covers (for UFS)?

If a computer crashes then the filesystem is an inconsistent state. What exactly is fsck(8) doing to restore to a usable filesystem? Is there a backup table? Is it cross-checking metadata? ...
1
vote
1answer
58 views

FreeBSD pkg query by automatic flag?

You can do a pkg set -A ... to set the automatic flag, but how do you do a pkg query for all packages with that automatic flag set? I see you can do pkg query -e '%#r != 0', but that's surely not the ...
1
vote
1answer
120 views

ZFS booting troubles

I have FreeBSD 8.0, and rebooting arise while zfs scrub was runing. Now when system booting it frezee at moment with ZFS version and ZFS pool version. I can't even login. The question : Is the scrub ...
1
vote
1answer
393 views

Setup ZFS on freeBSD from bsd-rescue

I have a server from OVH and have the following procedure of setting ZFS on FreeBSD10 on OVH server following the https://wiki.freebsd.org/RootOnZFS/GPTZFSBoot/Mirror Creating a bootable ZFS ...
1
vote
1answer
95 views

configure single /32 ip address to FreeBSD server

Our upstream provider assigned us a single /32 ip address. How can we configure our FreeBSd server to use it? So far we have this in /etc/rc.conf: ifconfig_em0="inet a.b.c.d/32 netmask ...
0
votes
1answer
123 views

WARNING: failed to start git_daemon

I follow this http://bin63.com/how-to-setup-a-git-repository-on-freebsd tutorial to the letter and edit: /etc/rc.conf with: git_daemon_enable="YES" git_daemon_directory="/git" ...
1
vote
1answer
174 views

VMDK File Growing After copying it using CP?

Using FreeBSD and a mounted NetApp NFS Share. I'm trying to copy a file FROM: localdisk/something.vmdk (size 527776 kilobytes) TO: nfsmount/copy-something.vmdk (size 533168 kilobytes) But it seems ...
1
vote
1answer
268 views

PF: Block all, but one subnet firewall rule?

I'm trying to do something that I thought would be relatively simple: Block all the traffic to a test server, other than my company's subnet. I've tried things along these lines (111.111.0.0 is my ...
3
votes
1answer
580 views

where does uname get version number in FreeBSD RELEASE?

I installed FreeBSD 9.1-RELEASE, after binary upgrading to 9.2-RELEASE using freebsd-update, all files I checked are correctly in 9.2-RELEASE-p4. For example: the kernel contains the new version: ...
1
vote
1answer
68 views

Moving MRTG Installation

We have an MRTG installation that has been working for the last 3 years, I noticed that after 18 or so months the data would start recording a fresh. Now I wanted to transfer the installation and all ...
1
vote
1answer
653 views

Why's Tomcat not responding, but looks normal?

I don't have much info to go on here, looking for ideas as I've run out. I did a server certificate update on our tomcat box (FreeBSD 9.2). After reboot, any connections to it fail immediately (page ...
-1
votes
1answer
53 views

How to install GNU on FreeBsd 10? [closed]

i have error configure: error: GNU make is required! and i have error $ cd /usr/ports/devel/gmake/ cd: /usr/ports/devel/gmake/: No such file or directory How to install GNU on FreeBsd 10?
2
votes
1answer
190 views

FreeBSD pkg database deleted

after resolving repeated crashes on startup with fsck I noticed some files were removed, one of them was the sqlite pkg database, so now when I run for example pkg install somepackage I get this erro: ...
1
vote
1answer
2k views

Custom PHPINIDir setting in VirtualHost affecting other VirtualHosts

One of the clients requested a personal php.ini configuration for his website, so I have set his VirtualHost as follows: <VirtualHost *:80> DocumentRoot "/home/alex/www.domain.tld" ...
1
vote
2answers
1k views

Can I automatically create a passworded user with pw adduser on freebsd?

Can I automatically create a passworded user with pw adduser on freebsd? pw useradd [name] [switches] -V etcdir alternate /etc location -C config configuration file ...
0
votes
1answer
214 views

apache taking old openssl libraries when doing apachectl graceful

Due to heartbleed vulnerability I have recompiled apache with non vulnerable latest openssl(I had to keep old vulnerable openssl due to some dependency problem). It is running fine and when doing ...
1
vote
1answer
127 views

Increase number of connections per socket

How do I increase the number of connections each socket can accept? I know that you can increase the total number of connections using: # sysctl kern.ipc.somaxconn=4096 But each connection is then ...
1
vote
1answer
692 views

FreeBSD (pfSense) Routing - Can't find the default route

I have been banging my head against the wall on this for a couple of days now - thought I had tried everything, but obviously not... I have the following networking scenario... ISPs Router Edge ...
0
votes
2answers
107 views

FreeBSD Established Connections Maxing out at 300

We've previously had issues in our environment where it seemed we were reaching FreeBSDs max connection limit. We took action demonstrated by http://nginx.org/en/docs/freebsd_tuning.html and bumped up ...
2
votes
2answers
95 views

How can I determine what RAIDZ level my volume is using?

I am looking at a ZFS volume on FreeBSD system, and I have no idea what RAIDZ level it is configured at. How can I find out using the ZFS command line or other? I tried "zpool status" already, and ...
2
votes
1answer
862 views

Can't boot FreeBSD 10 iso by PXE

I'm trying to boot FreeBSD 10 bootonly iso from with pxelinux and tftp, unfortunately the following error appears during freebsd boot: cd9660 :/dev/iso9660 error :/dev/iso9660/FREEBSD_INSTALL ...
0
votes
0answers
161 views

FreeBSD with Samba4 share permissions error

I have provisioned a samba4 server on FreeBSD 10 using UFS as a filesystem. However, I cannot seem to manage NTFS permissions for the shares such that roaming profiles can be implemented. My ...
0
votes
0answers
56 views

freebsd: disk i/o utilization statistic by user

Whether there some utils for collect/view statistic about disk I/O utilization by user in FreeBSD? After googling that question i found only sa, but in its manpage is not any information about ...
1
vote
2answers
804 views

Why is my server displaying openssl 0.9.8 when I have openssl1.0.1 installed?

I am creating a test server that is vulnerable to the heartbleed bug. My server is running Apache 2.4 on a FreeBSD VM. By default, FreeBSD seems to have OpenSSL 0.9.8 installed by default. I tried ...
3
votes
1answer
333 views

How do I remove Apache if I installed it from the source tarball?

I installed Apache 2.4 from a source tar, and there seems to be no "make deinstall" or "make uninstall" options in the makefile in the extracted directory. How can I remove the installed Apache server ...
1
vote
4answers
813 views

FreeBSD tcsh and terminal window size

When I'm working on my FreeBSD server's ssh, it always assume that terminal width is 80 columns. E.g. man pages show up in one thin column and all programs that use COLUMNS and LINES environment ...
7
votes
1answer
111 views

Disk size addressable by the OS

I have a 3ware 9550SXU-12 storage controller and 750G disks connected to it. The disks are configured as single units (not JBOD). I've been running some performance tests, mainly to see the impact of ...
0
votes
0answers
230 views

Proxy outbound connections throught squid

Informations FreeBSD 10.0 Squid 2.7 PF Scenario All the connections need to pass through an external authenticated proxy, so i need to proxy all outbound ftp and http connections through a ...
1
vote
0answers
51 views

emulate shared hosting load

I want to emulate some shared-hosting activity in testing environment. Is particularly interested I/O performance. Need to emulate: many sql queries, http queries, and some additional activity, ...
0
votes
2answers
358 views

How to make my FreeBSD machine visible automatically on Mac within same local network?

The Mac machines within a local network is visible automatically to the other Macs. They're visible on Finder and can be accessed with their names via console. As I know this is multicast-local-DNS. ...
5
votes
2answers
2k views

Need to replace disk in zpool … confused

I need to replace a bad disk in a zpool on FreeNAS. zpool status shows pool: raid-5x3 state: ONLINE scrub: scrub completed after 15h52m with 0 errors on Sun Mar 30 13:52:46 2014 config: ...
2
votes
1answer
505 views

FreeNAS: “swap_pager: I/O error - pagein failed”

Our FreeNAS server log is constantly filling up with Apr 5 15:13:49 Wheelhouse NAS kernel: swap_pager: I/O error - pagein failed; blkno 524312,size 4096, error 6 Apr 5 15:13:49 Wheelhouse NAS ...
0
votes
2answers
1k views

FreeNAS: “/var: write failed, filesystem is full”

Upon logging into our FreeNAS via shell, it says /var: write failed, filesystem is full So I did > df -h Filesystem Size Used Avail Capacity Mounted on /dev/ufs/FreeNASs2a ...
1
vote
2answers
738 views

Need to identify disk in zpool … how?

I need to replace a bad disk in a zpool on FreeNAS. zpool status shows gptid/5fe33556-3ff2-11e2-9437-f46d049aaeca UNAVAIL 0 0 0 cannot open How do I find the serial # of that disk? ...
1
vote
1answer
62 views

Huge quantity of session files

I have: CPU: 2 x Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz (2600.06-MHz K8-class CPU) 128 GB RAM FreeBSD OS session files stored in RAM each session file is 1...10 kb gc_maxlifetime = 1440 ...
0
votes
0answers
1k views

ZFS import unable to find any pools

I had a ZFS pool -- a mirror containing 2 vdevs -- running on a FreeBSD server. I now have only one of the disks from the mirror, and I am trying to recover files from it. The ZFS data sits in a GPT ...
2
votes
1answer
341 views

FREENAS: Why isn't mv command instant within a RAIDZ1 volume?

I'm currently 'reorganizing' file structure within a RAIDZ1 volume. Moving directories from one dataset to another, which are both contained on the same volume. SSH'ed into the machine and did a ...
0
votes
0answers
163 views

Forcing Apache 2.4 to cache files with query string using mod_cache without expires

I need to get mod_cache_disk to cache a site containing query strings. The issue is that it's a vendor product on IIS that we're trying to cache through mod_proxy and it does not contain expires ...
0
votes
1answer
66 views

Apache mod_rewrite - why friendly URL doesn't works with static files?

My configuration to use friendly URL works fine when the destination is a php script, like this: RewriteRule ^products/([a-z0-9-]+)/([0-9]+)/?$ /prod.php?id=$2&name=$1 [NC] But, when I use a ...
-3
votes
1answer
149 views

Upgrading to freebsd10 breaks apache24

Until now I was using freebsd9 with apache22 with ssl, every thing went well. But recently I moved to freebsd10 (fresh install) and then installed apache24 with same config as on old machine. ...
1
vote
0answers
130 views

LA problems while serving 40M requests daily with php-fpm, nginx

I have server with FreeBSD (16 cores with HT, SSD, 32Gb RAM) which is getting about 40M http requests daily. All requests are served by nginx + php-fpm. At these graphs you see that we have a ...