FreeBSD is an advanced operating system for a variety of architectures. It is derived from BSD, the version of UNIX® developed at the University of California, Berkeley; and is developed and maintained by a large team of individuals. It is a complete Operating System, including the kernel, drivers, ...

learn more… | top users | synonyms

4
votes
0answers
220 views

Freebsd change default Internet channel route

I have two Internet channel and Gateway on freebsd. When I switch channel with the command route change default chan2, the command netstat -nr shows changed default route. But traceroute shows that ...
2
votes
0answers
81 views

Unix nslcd login with sAMAccountName and/or userPrincipalName from Active Directory

I'm trying to setup authentication from Active Directory in FreeBSD 10.0 using nslcd (nss-pam-ldapd-sasl package) and would like to allow both sAMAccountName and userPrincipalName as valid login ...
2
votes
0answers
205 views

Why can't I chown to nobody over nfsv4?

Server: FreeBSD 9.2-RC1, ZFS Client: FreeBSD 9.0-RELEASE-p3 Filesystem is exported with "alldirs,maproot=root". On the client, I can chown a file to any user but nobody. client# touch foo client# ls ...
2
votes
0answers
106 views

FreeBSD raid issue

One of my machines (FreeBSD) has lost its raid (0/ stripe). If I go [root@torry /usr/home/bclark]# gstripe list Geom name: st0 State: UP Status: Total=3, Online=3 Type: AUTOMATIC Stripesize: 65536 ...
2
votes
0answers
224 views

Can't remove zfs log device from pool

I run a FreeBSD 9.0 server with ZFS pool version 28 and ZFS version 5. I had two pools with a log on ssd's two partitions. These pools was created on FreeBSD 8.2 with ZFS pool version 15, and ZFS ...
2
votes
0answers
163 views

Is there an equivalent of LinuxIMQs in BSD?

Is there an equivalent of LinuxIMQs in BSD ? From linuximq.net: The imq device has two common usage cases: Ingress shaping: With linux only egress shaping is possible (except for the ingress ...
2
votes
0answers
504 views

FreeBSD istgt - how to limit iscsi target discoverability to IP address

How can I setup an ISCSI target that is only visible to a certain IP address? For example, if a client runs iscsiadm discover from 10.1.1.130, I only want target iqn.2011-03.domain.org.istgt.ded130 ...
1
vote
0answers
30 views

Mounting partition in FreeBSD is not working

I am new to FreeBSD and I try to mount a partition p2 of ada1 on a new FreeBSD installation by entering: sudo mkdir -p /mnt/ada1p2 sudo mount /dev/ada1p2 /mnt/ada1p2 This leaves me with mount: ...
1
vote
0answers
45 views

emulate shared hosting load

I want to emulate some shared-hosting activity in testing environment. Is particularly interested I/O performance. Need to emulate: many sql queries, http queries, and some additional activity, ...
1
vote
0answers
109 views

Proper way of setting gateway outside of subnet on FreeBSD?

I have a VPS running FreeBSD 10 and it is located in OVH's BHS datacenter. The gateway for my VPS is not in the same subnet as my IP address and when I went to set the gateway the usually way, it ...
1
vote
0answers
96 views

LA problems while serving 40M requests daily with php-fpm, nginx

I have server with FreeBSD (16 cores with HT, SSD, 32Gb RAM) which is getting about 40M http requests daily. All requests are served by nginx + php-fpm. At these graphs you see that we have a ...
1
vote
0answers
21 views

Check-state counter is always zero

My firewall rules are: 00010 660 73050 allow ip from any to any via lo0 00011 0 0 deny ip from any to 127.0.0.0/8 00012 0 0 deny ip from 127.0.0.0/8 to any ...
1
vote
0answers
40 views

How to learn max/min value of a sysctl parameter can be in FreeBSD?

I have a simple question. I want to learn max/min value of a sysctl parameter can be. Where can I find bounds of these parameters? Thanks
1
vote
0answers
169 views

FreeBSD XEN kernel not booting in XenServer 6.2

I have a XenServer 6.2 host, and I am trying to get a FreeBSD-9.1-i386 guest to run in PV mode. The installation of the guest is fine, but after a reboot with the new kernel the system does not boot. ...
1
vote
0answers
162 views

How to read the address of the XSDT table, as provided by `acpidump`?

I want to access Physical memory in BSD. acpidump -t XSDT > xsdt_dump.asl it is giving: /* RSD PTR: OEM=ALASKA, ACPI_Rev=2.0x (2) XSDT=0x9aae8070, length=36, cksum=164 */ /* XSDT: ...
1
vote
0answers
151 views

Should I consolidate multiple identical VMs into BSD jails?

We run a number of Openfire XMPP/Jabber servers. Due to the way Openfire works, we cannot easily run multiple Openfire instances on one server, so I have 5 identical VMware ESXi VMs, each with CentOS, ...
1
vote
0answers
258 views

Networking between openvpn and pptp clients

Long uptime to everyone! OS FreeBSD 9.0-RELEASE, pptpd-1.3.4. Network: em0 1.2.3.4 - external interface and ip tun0 10.18.1.0/24 - network for openvpn clients tun1 10.18.2.0/24 - network for pptp ...
1
vote
0answers
414 views

freebsd/vsftpd: file size greater 64kb upload not completing

For very few customers, we are having problem in uploading any file greater then 64 kb. The server OS is FreeBSD running vsftpd over ssl. When we move these customers to a ftps server hosted on ...
1
vote
0answers
371 views

PHP5 OCI8 FreeBSD

I'm running a FreeBSD server with Apache and PHP 5.3. I'm trying to get the Oracle DB extension (OCI8) running with PHP but I can't find a port or anything for it. Half of the Internet says it's no ...
1
vote
0answers
346 views

Livestatus doesnt work with Nagios on FreeBSD

Im trying to use livestatus with nagios on FreeBSD. I've managed to compile and configure it, but Nagios doesnt seem to be loading the module and dont produce any errors. Other info: $ grep broker ...
1
vote
0answers
165 views

Distribute outgoing connections among multiple IPs configured on the same NIC

I have a NIC with 2 aliases on it. The network interface has 3 IPs configured on it. Think about it like this: i can ping the same server by hitting .100 .101 and .102. I want the source address of ...
1
vote
0answers
909 views

FreeBSD ixgbe driver not working

I recently got a brand new Dell PowerEdge R610 server, I installed VMWare ESXi 5.0 on it and attempted to install FreeBSD as guest OS for squid caching. The server has a PCI-E Intel X520-T2 10Gig ...
1
vote
0answers
1k views

how to force stop/delete a VirtualMachine under XenServer (possible bug)

I was testing XenServer 5.6 100-47101p, I installed four VM's, two FreeBSD and two Windows. After installing the four VM's, I recompiled the VM containing FreeBSD 8.2 i386 kernel to enable/support ...
1
vote
0answers
692 views

Freebsd, ipfw sched - config type = QFQ get frozen

I have some freebsd soft-router $uname -r 8.2-STABLE code for ipfw: pipe 50 config bw 70Mbit/s sched 50 config type QFQ queue 502 config sched 50 weight 1 mask dst-ip 0xffffffff queue 501 ...
1
vote
0answers
492 views

FreeBSD 8.0 - Samba 3.4.9 with ADS support Segfault 11

I'm running FreeBSD 8.0 and whenever I compile Samba 3.4.9 with ADS support it segfaults when I start the service. If I remove ADS support on Samba, it fixes it but I need ADS support. I saw from ...
0
votes
0answers
15 views

FreeBSD - How can I let server A get web access via server B over a specific port?

Setup: Server A: FreeBSD 10 - IP: 100.100.100.100 Server B: FreeBSD 9 - IP: 200.200.200.200 Both servers use pf.conf. Desired result: I want server A to be able to get web access (port 80) via ...
0
votes
0answers
72 views

FreeBSD 10 IPFW IPv6

I'm struggling to allow IPv6 connections on my FreeBSD 10 server. I have a working IPv6 connection. But IPFW blocks all the IPv6 traffic. #!/bin/sh # # flush existing rules ipfw -q flush # allow ...
0
votes
0answers
103 views

Unable to complete secure transaction - Nginx Opera browser

i have this nginx.conf file worker_processes 4; worker_priority 15; error_log logs/error.log notice; pid logs/nginx.pid; events { use kqueue; # event method, kqueue ...
0
votes
0answers
38 views

webmin says squid cache directory has not been initialized

I am using webmin on FreeBSD 9.2, when I goto the squid panel it tells me Your Squid cache directory /var/squid/cache/squid has not been initialized.This must be done before Squid can be run. It ...
0
votes
0answers
25 views

add a directory inside freebsd jail

Not sure if this is correct, but i have now installed freebsd 10 on top of ZFS with jails and have created a jail for Mongodb. For the data files I used the following: zfs create -o atime=off \ ...
0
votes
0answers
37 views

FreeBSD routing for multiple subnets

I have to access a network 10.1.0.0/16 through a gateway 10.4.0.2. I issue the command: route add -net 10.1.0.0/16 10.4.0.2 The machine's IP address where I doing this is 10.4.0.22 and it's default ...
0
votes
0answers
79 views

FreeBSD with Samba4 share permissions error

I have provisioned a samba4 server on FreeBSD 10 using UFS as a filesystem. However, I cannot seem to manage NTFS permissions for the shares such that roaming profiles can be implemented. My ...
0
votes
0answers
46 views

freebsd: disk i/o utilization statistic by user

Whether there some utils for collect/view statistic about disk I/O utilization by user in FreeBSD? After googling that question i found only sa, but in its manpage is not any information about ...
0
votes
0answers
123 views

Proxy outbound connections throught squid

Informations FreeBSD 10.0 Squid 2.7 PF Scenario All the connections need to pass through an external authenticated proxy, so i need to proxy all outbound ftp and http connections through a ...
0
votes
0answers
392 views

ZFS import unable to find any pools

I had a ZFS pool -- a mirror containing 2 vdevs -- running on a FreeBSD server. I now have only one of the disks from the mirror, and I am trying to recover files from it. The ZFS data sits in a GPT ...
0
votes
0answers
85 views

Forcing Apache 2.4 to cache files with query string using mod_cache without expires

I need to get mod_cache_disk to cache a site containing query strings. The issue is that it's a vendor product on IIS that we're trying to cache through mod_proxy and it does not contain expires ...
0
votes
0answers
59 views

FreeBSD ipnat(8) rdr - not redirecting

I'm using FreeBSD-10.0-RELEASE: root@fx:~ # uname -a FreeBSD fx.alexus.org 10.0-RELEASE FreeBSD 10.0-RELEASE #0 r260789: Thu Jan 16 22:34:59 UTC 2014 ...
0
votes
0answers
77 views

frebsd-update IDS reports wrong SHA256 on every single file on my system

How come freebsd-update says following on every single file on my file system? # freebsd-update IDS > freebsd-update.IDS # tail -1 freebsd-update.IDS /var/db/mergemaster.mtree has SHA256 hash ...
0
votes
0answers
93 views

Can't install p5-Digest-SHA1 on FreeBSD 8.3

I am trying to instasll rkhunter on a FreeBSD 8.3 box. However, during make install one of the dependencies failed to build: ===> Building package for p5-Digest-SHA1-2.13 Creating package ...
0
votes
0answers
135 views

Configuring an IPv6 FreeBSD router works on boot only

I am trying the following: I am having a DHCPv6 server (machine A) with a /48 subnet which will delegate /64 subnets to other routers using the prefix delegation mechanism. One of these routers is a ...
0
votes
0answers
177 views

ZFS destroy aborted - how to get rid of snapshot?

I've got a problem with one of my FreeNAS 8 boxes. I was deleting some snapshots with zfs destroy when unfortunatelly my PC crashed and therefore killed the SSH-connection while a snapshot destroyment ...
0
votes
0answers
59 views

How do I get debug symbols for the Python 2.7.5 executable installed from the “python-2.7_1,2” port?

I have a runaway process to debug. The problem only manifests on two FreeBSD 9.1 servers I'm using. I have a core file that might contain useful information. My first two thoughts were to attach to ...
0
votes
0answers
439 views

XenServer giving bridge access to guest using Private Network

I have two networks configured in XenServer 6.2: Production - Private Network Management - Private Network For each guest, I have two NIC's, one per network. None of the guests should have ...
0
votes
0answers
153 views

PF, redirecting SSH to internal VM

I run a FreeBSD server with VirtualBox on it. There's a VM in there I'd like to contact via SSH directly using Port 20000. Client and FreeBSD server are connected through OpenVPN via tun. The ...
0
votes
0answers
149 views

FreeBSD 7 syslog messages: “kernel: 15.xxxxxxxxxxxxxxx too long” (or “too short”)?

I'm experiencing poor performance on an old FreeBSD system and the only anomaly I see so far are syslog messages of the form: Jul 1 12:10:50 myserverXXX kernel: 16.0ccdd219377c0d80 too long Jul 1 ...
0
votes
0answers
84 views

Freebsd routing doesn't work

My FreeBSD 9.1 has 3 interfaces: de0 - Internet 1.1.1.45 de1 - LAN 192.168.1.1 de2 - DMZ which I have just added 1.1.1.43 default gateway 1.1.1.33 I have one host on DMZ 1.1.1.42 i have ...
0
votes
0answers
71 views

FreeBSD drops connection on file upload

Very strange error, first I thought it related to PHP settings or nginx (both have all proper settings up to 1G limits and all timeouts are properly set), but then I checked with Ruby (Sinatra), and ...
0
votes
0answers
539 views

How to setup Squid to allow outgoing HTTPS calls on FreeBSD jails where Squid acts as both proxy and accelerators?

This should be actually a very obvious setup, but somehow I have missed the obvious step! Default assumptions: FreeBSD 6.4-RELEASE-p11, Squid 2.7.STABLE9. These are not changeable, so "upgrade to the ...
0
votes
0answers
257 views

Copying UTF8 text file from FreeBSD to another system corrupts unicode characters

I have two production servers running FreeBSD 7.3 (Prod A and Prod B). Locally I'm on OS X Mountain Lion (Local). I have an EC2 staging server running Ubuntu 12.04 (Staging). I have a mysql database ...
0
votes
0answers
420 views

Can not install PHP/Lighttpd or any other service on FreeBSD

I've just bought a new dedicated server and I wanted to install the basic services on it, but when I tried to install php after updating my ports I get the following error message (after PHP's ...