FreeBSD is an advanced operating system for a variety of architectures. It is derived from BSD, the version of UNIX® developed at the University of California, Berkeley; and is developed and maintained by a large team of individuals. It is a complete Operating System, including the kernel, drivers, ...

learn more… | top users | synonyms

5
votes
0answers
309 views

Freebsd change default Internet channel route

I have two Internet channel and Gateway on freebsd. When I switch channel with the command route change default chan2, the command netstat -nr shows changed default route. But traceroute shows that ...
3
votes
0answers
656 views

SSH_ORIGINAL_COMMAND variable not getting set

I am working with two servers, both of which run FreeBSD 8.4-RELEASE-p1 and OpenSSH_6.1p1. Both servers' ssh_config files, located in /etc/ssh, are identical. Both servers are configured to allow ...
2
votes
0answers
197 views

FreeRADIUS using Active Directory integration broken without any traces

I've a FreeBSD 10.0 server running FreeRADIUS 3 and things got broken without any apparent reason. I'm using Winbind from Samba4 to authenticate with ntlm_auth. I've done some debug to solve the ...
2
votes
0answers
343 views

Unix nslcd login with sAMAccountName and/or userPrincipalName from Active Directory

I'm trying to setup authentication from Active Directory in FreeBSD 10.0 using nslcd (nss-pam-ldapd-sasl package) and would like to allow both sAMAccountName and userPrincipalName as valid login ...
2
votes
0answers
282 views

Why can't I chown to nobody over nfsv4?

Server: FreeBSD 9.2-RC1, ZFS Client: FreeBSD 9.0-RELEASE-p3 Filesystem is exported with "alldirs,maproot=root". On the client, I can chown a file to any user but nobody. client# touch foo client# ls ...
2
votes
0answers
132 views

FreeBSD raid issue

One of my machines (FreeBSD) has lost its raid (0/ stripe). If I go [root@torry /usr/home/bclark]# gstripe list Geom name: st0 State: UP Status: Total=3, Online=3 Type: AUTOMATIC Stripesize: 65536 ...
2
votes
0answers
299 views

Can't remove zfs log device from pool

I run a FreeBSD 9.0 server with ZFS pool version 28 and ZFS version 5. I had two pools with a log on ssd's two partitions. These pools was created on FreeBSD 8.2 with ZFS pool version 15, and ZFS ...
2
votes
0answers
180 views

Is there an equivalent of LinuxIMQs in BSD?

Is there an equivalent of LinuxIMQs in BSD ? From linuximq.net: The imq device has two common usage cases: Ingress shaping: With linux only egress shaping is possible (except for the ingress ...
2
votes
0answers
566 views

FreeBSD istgt - how to limit iscsi target discoverability to IP address

How can I setup an ISCSI target that is only visible to a certain IP address? For example, if a client runs iscsiadm discover from 10.1.1.130, I only want target iqn.2011-03.domain.org.istgt.ded130 ...
1
vote
0answers
11 views

FreeBSD L2TP/IPsec not routing traffic to vpn server

I have configured a VPN server on my FreeBSD server, it all seems to be running, but the VPN traffic is not routing through to the local VPN server and I cannot figure out as to why. So my question ...
1
vote
0answers
87 views

Heavy traffic causes ethernet link to go down

I have a FreeBSD (10) host connected to a Linux (Debian 7) box directly with a Cat 6 cable. Both hosts have Intel X-540 10GBe NICs (ixbge). Whenever there is heavy traffic (high PPS) from the ...
1
vote
0answers
182 views

Mounting partition in FreeBSD is not working

I am new to FreeBSD and I try to mount a partition p2 of ada1 on a new FreeBSD installation by entering: sudo mkdir -p /mnt/ada1p2 sudo mount /dev/ada1p2 /mnt/ada1p2 This leaves me with mount: ...
1
vote
0answers
53 views

emulate shared hosting load

I want to emulate some shared-hosting activity in testing environment. Is particularly interested I/O performance. Need to emulate: many sql queries, http queries, and some additional activity, ...
1
vote
0answers
173 views

LA problems while serving 40M requests daily with php-fpm, nginx

I have server with FreeBSD (16 cores with HT, SSD, 32Gb RAM) which is getting about 40M http requests daily. All requests are served by nginx + php-fpm. At these graphs you see that we have a ...
1
vote
0answers
28 views

Check-state counter is always zero

My firewall rules are: 00010 660 73050 allow ip from any to any via lo0 00011 0 0 deny ip from any to 127.0.0.0/8 00012 0 0 deny ip from 127.0.0.0/8 to any ...
1
vote
0answers
50 views

How to learn max/min value of a sysctl parameter can be in FreeBSD?

I have a simple question. I want to learn max/min value of a sysctl parameter can be. Where can I find bounds of these parameters? Thanks
1
vote
0answers
213 views

FreeBSD XEN kernel not booting in XenServer 6.2

I have a XenServer 6.2 host, and I am trying to get a FreeBSD-9.1-i386 guest to run in PV mode. The installation of the guest is fine, but after a reboot with the new kernel the system does not boot. ...
1
vote
0answers
224 views

How to read the address of the XSDT table, as provided by `acpidump`?

I want to access Physical memory in BSD. acpidump -t XSDT > xsdt_dump.asl it is giving: /* RSD PTR: OEM=ALASKA, ACPI_Rev=2.0x (2) XSDT=0x9aae8070, length=36, cksum=164 */ /* XSDT: ...
1
vote
0answers
165 views

Should I consolidate multiple identical VMs into BSD jails?

We run a number of Openfire XMPP/Jabber servers. Due to the way Openfire works, we cannot easily run multiple Openfire instances on one server, so I have 5 identical VMware ESXi VMs, each with CentOS, ...
1
vote
0answers
295 views

Networking between openvpn and pptp clients

Long uptime to everyone! OS FreeBSD 9.0-RELEASE, pptpd-1.3.4. Network: em0 1.2.3.4 - external interface and ip tun0 10.18.1.0/24 - network for openvpn clients tun1 10.18.2.0/24 - network for pptp ...
1
vote
0answers
469 views

freebsd/vsftpd: file size greater 64kb upload not completing

For very few customers, we are having problem in uploading any file greater then 64 kb. The server OS is FreeBSD running vsftpd over ssl. When we move these customers to a ftps server hosted on ...
1
vote
0answers
449 views

PHP5 OCI8 FreeBSD

I'm running a FreeBSD server with Apache and PHP 5.3. I'm trying to get the Oracle DB extension (OCI8) running with PHP but I can't find a port or anything for it. Half of the Internet says it's no ...
1
vote
0answers
394 views

Livestatus doesnt work with Nagios on FreeBSD

Im trying to use livestatus with nagios on FreeBSD. I've managed to compile and configure it, but Nagios doesnt seem to be loading the module and dont produce any errors. Other info: $ grep broker ...
1
vote
0answers
175 views

Distribute outgoing connections among multiple IPs configured on the same NIC

I have a NIC with 2 aliases on it. The network interface has 3 IPs configured on it. Think about it like this: i can ping the same server by hitting .100 .101 and .102. I want the source address of ...
1
vote
0answers
1k views

FreeBSD ixgbe driver not working

I recently got a brand new Dell PowerEdge R610 server, I installed VMWare ESXi 5.0 on it and attempted to install FreeBSD as guest OS for squid caching. The server has a PCI-E Intel X520-T2 10Gig ...
1
vote
0answers
1k views

how to force stop/delete a VirtualMachine under XenServer (possible bug)

I was testing XenServer 5.6 100-47101p, I installed four VM's, two FreeBSD and two Windows. After installing the four VM's, I recompiled the VM containing FreeBSD 8.2 i386 kernel to enable/support ...
1
vote
0answers
728 views

Freebsd, ipfw sched - config type = QFQ get frozen

I have some freebsd soft-router $uname -r 8.2-STABLE code for ipfw: pipe 50 config bw 70Mbit/s sched 50 config type QFQ queue 502 config sched 50 weight 1 mask dst-ip 0xffffffff queue 501 ...
1
vote
0answers
503 views

FreeBSD 8.0 - Samba 3.4.9 with ADS support Segfault 11

I'm running FreeBSD 8.0 and whenever I compile Samba 3.4.9 with ADS support it segfaults when I start the service. If I remove ADS support on Samba, it fixes it but I need ADS support. I saw from ...
0
votes
0answers
20 views

openVPN on another IP

I had a working OpenVPN on my server, and it was working fine, redirecting traffic to the/from the internet, but when i have found that the traffic to the services on this server not routing through ...
0
votes
0answers
19 views

Why doesn't portmaster check port architecture when make errors out?

I discovered that portmaster java/openjdk6 proceeds to compile/install while make install clean in /usr/ports/java/openjdk6 errors out and says the armv6 arch is unpresent in the port? Why? ...
0
votes
0answers
53 views

Configuring mod_chat_log for ejabber 14.07 in yaml

I have a trouble in configuring mod_log_chat for ejabber 14.07 on FreeBSD 10. I've compiled mod_log_chat.erl to mod_log_chat.beam add to ejabberd.yml mod_log_chat: path: "/var/log/ejabberd/chat" ...
0
votes
0answers
78 views

zfs raidz can not read from disk

my freebsd 10 server running on zfs raidz. I have a problem with reading files, test dd of=/dev/null if=/tmp/test/1000mb.bin bs=1024k count=1000 953+1 records in 953+1 records out 1000000000 bytes ...
0
votes
0answers
74 views

MySQL exits without any output

Having a strange issue. Some time ago MySQL exited suddenly when I was creating a table (I think), and I shelved the issue until now. It seems to start, but nothing happens and it exits: 141031 ...
0
votes
0answers
39 views

pfsense: break gmirror raid 1 before upgrading

I have a pfsense firewall in an appliance. The disk is using gmirror with RAID 1 setup. Before this, whenever I want to do OS upgrade, I will shut down the appliance, remove it from server rack, open ...
0
votes
0answers
74 views

php-mysqli extension fails as compilation

When I am trying to build the latest php5-mysqli port I get the following errors back: cd /usr/ports/databases/php5-mysqli && make MAKE_JOBS_UNSAFE=yes install clean ...
0
votes
0answers
387 views

SSH server in a FreeNAS jail is not accessible from the local network

I Have a FreeNAS (not sure which version - the one that uses FreeBSD 9.2) setup with a jail that I use for running various tasks. The jail has SSH service enabled in rc.conf, and I can also see the ...
0
votes
0answers
37 views

FreeBSD jail loses network connectivity after some time

I have a Jail on a FreeBSD 9.2 installation on my office network, which I use to run some cron jobs that upload and download stuff from external servers. The cron jobs are configured on the main ...
0
votes
0answers
218 views

Accessing public ip from within freebsd jail with ipf and ipnat

I'm using FreeBSD 9.3 (same issue with 9.2 and 10.0 in test VMs). I have jails running on lo1 10.0.0.x addresses. I use ipf with this config in /etc/ipf.rules: pass in quick on em0 all pass out quick ...
0
votes
0answers
57 views

Intel RAID 1 states changes during install FreeBSD 10

I working on my all servers with FreeBSD 7.x / 8.x on mainboards with Intel RAID 1. I tied to install FreeBSD 10 on machine with Intel Z97 chipset and RAID 1 (mirror). During install process, all RAID ...
0
votes
0answers
111 views

FreeBSD Ezjail flavour script fails to execute

I'm having some trouble configuring jails on FreeBSD (10.0-RELEASE) with Ezjail (3.4.1). The flavour RC script does not seem to execute on first jail startup. The script is located in ...
0
votes
0answers
330 views

Samba server on CentOS sees shared directories, but no files visible

I have a very basic samba share for a development environment. There is a directory /var/www/ owned by www:www. All subdirectories are also owned by www:www. All users are members of the www group. ...
0
votes
0answers
92 views

FreeBSD jail (ez-jail) “connect: Operation not permitted” ONLY for endpoints routable from a particular interface when jail is bound to a `bridge`

Edit I answered my original question: basically, binding the jail to a bridge interface was the problem. Now my question is, why is this the case? Is there a way to get it to work with a bridge ...
0
votes
0answers
44 views

OpenLDAP PAM authen does not support SSHA on FreeBSD10

OpenLDAP PAM authen does not support SSHA? Hi everyone, Now, I lost one day to figure out, the reason my FreeBSD10 can not authenticate SSH user via LDAP because pam_ldap and nss_ldap do not support ...
0
votes
0answers
24 views

Will pfctl -sr show ordered rules when using -o profile?

When I enable the -o profile option with pf will pfctl -sr show me the new order of the rules?
0
votes
0answers
42 views

FreeBSD - How can I let server A get web access via server B over a specific port?

Setup: Server A: FreeBSD 10 - IP: 100.100.100.100 Server B: FreeBSD 9 - IP: 200.200.200.200 Both servers use pf.conf. Desired result: I want server A to be able to get web access (port 80) via ...
0
votes
0answers
386 views

FreeBSD 10 IPFW IPv6

I'm struggling to allow IPv6 connections on my FreeBSD 10 server. I have a working IPv6 connection. But IPFW blocks all the IPv6 traffic. #!/bin/sh # # flush existing rules ipfw -q flush # allow ...
0
votes
0answers
238 views

webmin says squid cache directory has not been initialized

I am using webmin on FreeBSD 9.2, when I goto the squid panel it tells me Your Squid cache directory /var/squid/cache/squid has not been initialized.This must be done before Squid can be run. It ...
0
votes
0answers
77 views

FreeBSD routing for multiple subnets

I have to access a network 10.1.0.0/16 through a gateway 10.4.0.2. I issue the command: route add -net 10.1.0.0/16 10.4.0.2 The machine's IP address where I doing this is 10.4.0.22 and it's default ...
0
votes
0answers
174 views

FreeBSD with Samba4 share permissions error

I have provisioned a samba4 server on FreeBSD 10 using UFS as a filesystem. However, I cannot seem to manage NTFS permissions for the shares such that roaming profiles can be implemented. My ...
0
votes
0answers
65 views

freebsd: disk i/o utilization statistic by user

Whether there some utils for collect/view statistic about disk I/O utilization by user in FreeBSD? After googling that question i found only sa, but in its manpage is not any information about ...