The tag has no wiki summary.

learn more… | top users | synonyms

1
vote
1answer
256 views

Route Traffic Through Linux Server With Two Devices

Here is my current setup (all servers are Ubuntu Server Edition 12.04): Server 0 has two devices, eth0 and eth1. eth0 is connected to the wall (the internet), and eth1 is connected to a switch. ...
0
votes
2answers
169 views

connecting to server with multiple nics in other vlan

I'm sorry to be unclear... I will try to rephrase the problem. I work in a school as IT-administrator and I'm not a specialist, but try to make the best out of it. I hope you guys have a little ...
-1
votes
1answer
83 views

Cannot connect to external 192.168 address [closed]

I am connected via VPN to another network which uses IP addresses in the range 192.168.x.x. I have changed my home network to not use that network (I use 10.10.x.x). However, I cannot seem to access ...
1
vote
2answers
125 views

Chain Gateways on the LAN

I installed m0n0wall in a virtualized environment, i have 10 PCs connected to a router ( 192.168.1.0/24) which connect them to the internet through PPPoE, the problem is that this router does not have ...
3
votes
2answers
181 views

Preventing endless forwarding with two routers

The network in quesiton looks basically like this: /----Inet1 / H1---[111.0/24]---GW1---[99.0/24] \----GW2-----Inet2 Device ...
0
votes
1answer
1k views

Ping reply not getting to LAN machines but getting in Linux router Gateway

I have configured Ubuntu 12.04 as Gateway machine.its having two interfaces eth0 with ip 192.168.122.39(Static) and eth1 connected to modem with ip address 192.168.2.3(through DHCP). ...
1
vote
0answers
366 views

Clear OS Community and packet time out in client machines only

I am having Clear OS Community Edition running as router with 2 network interfaces. Interface eth0 is connected to LAN with ip 192.168.122.2 and interface eth0 with ip 192.168.2.2 is having internet ...
2
votes
2answers
5k views

How can I setup RD Gateway on the same server as TMG?

I have used the following guides with no luck: http://www.rayheffer.com/953/building-a-remote-desktop-gateway-rdg-rd-gateway-server/ ...
2
votes
2answers
230 views

Default route not on LAN

I have a network that in principle looks like this: H1---\ /----Inet1 H2---->---GW1---< H3---/ \----GW2-----Inet2 H1 and H2 = Hosts that need access to internet with GW1 ...
4
votes
2answers
234 views

2 nics. 2 Defaults Gateways

Here is my scenario: i have this server with 2 nics, each one with different IPs, connected to differents routers. Almost everything is configured whe way i need. Traffic coming from eth0 exits ...
0
votes
1answer
521 views

Two Cisco 2901 Back-to-Back using X.21 (HWIC-2T) - Am I missing some config?

I have two Cisco 2901 GWs, each has an HWIC-2T interface module. I want to set them up back-to-back to send network traffic between PCs and Phones connected to my GWs over this link. I have ...
1
vote
0answers
151 views

Configuring linux gateway to forward packets

I have a windows box with a wireless card (ip 10.10.96.22) configured with a default gateway of 10.10.96.21/24 (this is my linux laptop's wireless ip). From the Windows box I can ping my linux laptop ...
0
votes
1answer
306 views

Weird routing issue

I am working on getting networking working correctly on a cluster of 14 virtual servers at a customer site. 11 of them work fine for routing and 3 don't work correctly for their administrative ...
1
vote
2answers
544 views

Gateway redundancy on a single subnet

I'm trying to discover if there are any methods to have more than 1 default gateway (in a fail-over strategy) on a single subnet. If one gateway goes down then I would like to have servers fail-over ...
1
vote
0answers
538 views

IPcop Multiple WAN Subnets

We have an IPcop firewall and have had no issues with it. We've had a block of 10 IP addresses from our colocation provider and have been able port forward from those to internal servers as needed. ...
3
votes
1answer
2k views

What is the purpose of netcat's “-w timeout” option when ssh tunneling?

I am in the exact same situation as the person who posted another question, I am trying to tunnel ssh connections through a gateway server instead of having to ssh into the gateway and manually ssh ...
2
votes
1answer
453 views

What causes packet loss from Debian server to nearest gateway?

I have a debian Squeeze KVM server hosted with an ISP. The server doesn't have much load (average 0.1) and has sufficient memory, low network traffic, low disk i/o etc etc. It's running standard LAMP ...
2
votes
1answer
208 views

open source solution to a gateway for a network of a housing cooperative of 150 people

i just inherited a barely functioning network for a student housing cooperative of about 150 people. in it's current state, as i understand it from the previous person in charge of the network, we ...
0
votes
1answer
869 views

Is there a free linux distribution that provides network services with an Web interface? [closed]

What I have in mind and used is a commercial gateway/firewall with an web-interface for configuration that has this specifications: Administration Network Monitoring and logging Authentication ...
0
votes
2answers
5k views

arp -n responds with (incomplete) on the wrong subnet, can't remove it

context There are 2 servers: server1 - eth0 10.129.76.16 eth0.2 192.168.0.103 server2 - eth0 10.129.79.1 eth0.2 192.168.62.101 The 192.x.x.x addresses are connected to the ...
0
votes
1answer
139 views

Protect software default gateway from ip-stealing

We have a corporate network that is comprised of the following elements: Internet cable (wall) <-> (ext interface (DHCP))(Windows Server 2008, TMG-enabled, Internet Gateway)(int interface (static ...
2
votes
1answer
462 views

I need to change the external IP address based on source IP address

I'm running an iptables firewall with 5 aliased ip addresses (actual ip 10.64.18.1). This machine is also my gateway out for all internal machines (192.168.18.*). My problem is, when 192.168.18.65 ...
2
votes
1answer
1k views

What is the right place for default gateway in CentOS/RHEL?

As I can see there are 2 places where GATEWAY option could be used in CentOS: /etc/sysconfig/network /etc/sysconfig/network-scripts/ifcfg-* What is the right place for default gateway and what ...
-3
votes
2answers
70 views

How do i create a 'layer' in between my router and a user connecting to it [closed]

Like when you go to starbucks the first thing you see if you go to their wifi is "Welcome to starbucks, please accept our terms". Or also at most airports, it makes it impossible to surf until you ...
1
vote
2answers
924 views

Linux (Ubuntu 12.04) two gateways one nic

I have Ubuntu 12.04 Server edition Two gateways, both on 192.168.0. network, let's make them 192.168.0.1 and 192.168.0.2 I've read you should be able to add second gateway into ...
4
votes
2answers
4k views

OpenVPN connection works but no gateway is assigned

i try to setup openvpn on a vps and I'm able to establish a connection to the server, but the gateway isn't assigned to the client. Here are my config files: client config: client dev tun proto ...
1
vote
1answer
3k views

TMG 2010 Edge Firewall Setup - Internal subnet has no internet access

I just set up a TMG 2010 server as an edge firewall. The TMG machine has two NICs: LAN: IP-192.168.1.1, Netmask-255.255.255.0, DNS-192.168.1.3, Gateway-(blank) WAN: IP-119.x.x.98, ...
0
votes
1answer
325 views

Add IPv6 support to DirectAdmin server [closed]

I just set up an new DirectAdmin, and I want to prepare it for IPv6 use. My ISP have gave me an range of IPv6 addresses that I can use. Lets say that address is 2a01:7c8:**:1f::. My neworkadapter ...
5
votes
1answer
2k views

Utilize two gateways on the same network same interface with load balancing

My setup is two ISPs on a single interface and single network. I can either set my default gateway to 192.168.0.1 or 192.168.1.250 and either work. Edit: Netmask (as noticed in the comment) is ...
2
votes
2answers
130 views

Calculate data transferred in a local LAN

How do you calculate the data flown between a computer and the gateway computer. I have a Linux router/gateway running IP Tables which routes internet traffic in a LAN. I have individual users with ...
0
votes
2answers
84 views

Machine as gateway between a router and local devices

I have a machine that I want to use as a gateway between the router. For example: Several machines on the network wants to access www.google.com lets say Send their requests to me I send them to my ...
0
votes
2answers
119 views

advice on gateway address

I am wondering if a node on a subnet should have its default gateway set to the IP of the router or should it be the IP address of the switch? In Packet Tracer, I am using the router's address as the ...
2
votes
1answer
2k views

Centos 6.2 Fresh 'Basic Server' install networking issues

I've had a /29 provisioned on a network port for a server and am trying to at least configure the machine so I can ssh into it. It's Centos 6.2 x64 with the Basic Server install. Currently not able to ...
0
votes
2answers
199 views

Routing table gateway

I have a VPS (CentOS 5.6). Here is my routing table. Kernel IP routing table Destination | Gateway | Genmask | Flags | Metric | Ref | Use Iface 192.x.x.0 | 0.0.0.0 | 255.255.255.0 | U | ...
1
vote
1answer
2k views

How to change default gateway on XP VPN connection?

When I connect to an XP VPN the default gateway for the connection is the IP address of the VPN server machine. I think this is the reason I cannot connect to the internet via the VPN. How do I ...
1
vote
1answer
456 views

Network Gateway Options for Small Office: Cisco 800 series router vs. Linux/*BSD (e.g. pfSense) on a white box vs. reflashed DD-WRT/Tomato/OpenWRT

Our existing network gateway's hardware has just failed (it was a repurposed desktop machine running Debian + Shorewall that we threw together), and we're looking to replace it. For now, we've fallen ...
1
vote
1answer
2k views

pfSense - OpenVPN - tap - client connection: Default Gateway Error

We have setup a OpenVPN Server on a pfSense v2.0.1 Router with the "OpenVPN tap Bridging Fix package" to build a bridged VPN network. We followed this HOWTO: link Nearly everything workes fine expect ...
0
votes
1answer
210 views

how to get gateway address

I am trying to get gateway address but when i call "route -n" I expect to see something like that Destination Gateway Genmask Flags 0.0.0.0 dnsip 0.0.0.0 UG ...
1
vote
1answer
209 views

Forward Request to Multiple Servers

We have 2 servers. One is old server and another is the new one. Currently we about doing a migration because the old server is not capable enough to handle everyday requests. The specs are: Old ...
0
votes
1answer
1k views

Connecting a LAN to an OpenVPN server via a windows 7 client gateway

I've got OpenVPN set up between my windows 7 client and linux server. The goal is that I'll get secure access to a webapp running on the server from any computer on the client LAN. I'm using ccd to ...
0
votes
2answers
2k views

iptables as gateway and POP3 SMTP ports

when trying to open the ports 110 and 25 in my iptables for outlook-only users, i cant do it except by forwarding as such: -I FORWARD -i eth0 -s 192.168.1.0/24 -j ACCEPT -I FORWARD -i eth1 -d ...
0
votes
1answer
531 views

Connectivity restored with `ping`?

My server is operating properly. Something happens... Suddenly, my server is inaccesible via ssh and http. (The only open ports in the firewall.) All eth0 configuration is static, no DHCP. ...
2
votes
1answer
383 views

iptables gateway not working on clients

I am not sure what's going on, but I have setup a gateway debian box with iptables and dhcpd server. The server is handing out the ip addresses to the clients just fine, gateway being set to the ...
-1
votes
1answer
2k views

CentOS gateway setting on startup

I'm running CentOS 6.2 on ESXi 5. The machine has 2 NICs, eth0 is connected to the Internet and eth1 to a LAN. eth0 has a single colo provided IP address, so the netmask is 255.255.255.255. The ...
1
vote
3answers
5k views

What can I do if my organization is running out of IP addresses?

My organization is going to run out of local network IP addresses within the next few months. We are expanding to get a ton of new people and we are switching over to Lync IP phones. Crunching ...
3
votes
1answer
9k views

How can I use iptables to forward all traffic to a certain website?

I have a Radius server doing Mac Auth on VLANs. If the MAC address isn't in the allowed table, the user is put into a separate VLAN. What I want to do on that separate VLAN, is have my Debian server ...
1
vote
2answers
3k views

Multiple VPN connections at the same time

I am investigating how to set up an SMS gateway that forwards messages to different mobile network operators. Connections to the operators are typically made via VPN. My question is how to configure ...
3
votes
1answer
93 views

Our datacentre is forcing us to change IP addresses, what is the best way to take advantage of the period when they're both active (failover gateway)?

The subnet of IPs the datacentre gave us was apparently on loan, so they assigned us a new block and gave us two weeks to swap them over, during which both will be active. They're on totally different ...
0
votes
2answers
208 views

Routing traffic so that it appears to originate from a single (static) IP address

We have three sets of computers: clients, a single proxy and multiple servers. The clients (many) want to connect to the servers (many) using TCP on a specific and consistent port. Currently they do ...
0
votes
1answer
7k views

How do I increase FastCGI read timeout to prevent 504 error on nginx?

I am running a file with considerable amount of coding. It takes approximately 55 seconds to process 500 users, but now I have to process 1000 users. The default timeout is 60 seconds, so I have to ...