0
votes
1answer
29 views

Difference of HP network adapter types?

HP have a special type of cards they call FlexibleLOM, and I can't figure out what the differences are of the following HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter HP Ethernet 10Gb 2-port ...
2
votes
0answers
63 views

HP SNMP Traps signalled every 10 seconds for a NIC

I'm trying to setup SNMP traps on my HP DL160 G6 (Xenserver) to notify me whenever I have issues with the server. Following suggestions from this serverfault post, I've installed the HP SNMP agents ...
1
vote
1answer
296 views

Fastest server ram configuration for 48GB?

I have an HP ProLiant DL160G6 server, with 2 CPU's and 48GB ram, with following modules: 4x 8GB Module - DDR3 1066MHz (KTH-PL310Q8/8G) 4x 4GB Module - DDR3 1333MHz (KTH-PL3138/4G) I'm re-purposing ...
26
votes
2answers
476 views

HP plan to restrict access to ProLiant server firmware - consequences?

I've been a longtime advocate for HP ProLiant servers in my system environments. The platform has been the basis of my infrastructure designs across several industries for the past 12 years. The ...
1
vote
1answer
41 views

HP SL250s will not boot from the network, does not appear to DHCP

I have an HP Proliant SL250s Gen8 (right-hand) server which is apparently not able to boot from the network. If I configure the system to PXE boot in the BIOS, or if I hit F12, it does start up the ...
0
votes
1answer
180 views

HP ProLiant DL385 G6 - “Fan Solution Not Sufficient” error

I have a HP DL385 G6 that is acting up. Weeks ago it stopped booting with an error of Fan Solution Not Sufficient. The front panel indicating that fans 3 and 4 were down though both these fans are ...
2
votes
1answer
457 views

HP ProLiant DL380 G7 servers will not POST

We have just received 2 HP DL380 G7's from our DR site. They have been running fine at the site for some time but we have tried to power them up in our DC and they will not post. We get a very brief ...
10
votes
3answers
601 views

Force renegotiation of PCI Express link speed? x2 card reverts to x1 width

In an effort to circumvent compatibility and cost barriers to using SSD drives with newer HP ProLiant Gen8 servers, I'm working to validate PCIe-based SSDs on the platform. I've been experimenting ...
10
votes
3answers
2k views

What happens when the USB key or SD card I've installed VMware ESXi on fails?

An SD (SDHC) card installed in an HP ProLiant DL380p Gen8 server running VMware ESXi just failed :( I encountered some rather ominous looking messages on the vCenter console and in the HP ProLiant ...
3
votes
1answer
165 views

DDR3 10600 memory running at 533mhz

I bought a second hand hp dl160 g6 a year ago with 48GB configured in it. I discovered checking with cpu-z and doublechecked with speccy the memory runs at only 533Mhz. I checked the configuration ...
1
vote
2answers
55 views

HP p400i - 512MB RAID Controller card

Anyone know if the HP p400i raid controller can support multiple arrays? Say if I wanted a raid 0 with 2x146GB drives, and 3x300GB drives in a raid 5, both on the same card? Also, is it possible to ...
2
votes
1answer
456 views

HP DL165G7: NMI error

One of "my" DL165 G7 Proliants has rebooted out of the blue for the second time this month. The reboot was accompanied by these system event log entries in LightsOut: Event Type Date Time ...
0
votes
2answers
418 views

HP ProLiant DL320 G5 No Video Output, No Error LEDs, Swapped Motherboard, Same Issue

I have a HP ProLiant DL320 G5 Server that we have swapped out the motherboard with a working one, tried narrowing down removing different memory sticks, swapped out the onboard battery. I have a ...
22
votes
7answers
1k views

Is it necessary to burn-in RAM for server-class hardware?

Considering the fact that many server-class systems are equipped with ECC RAM, is it necessary or useful to burn-in the memory DIMMs prior to their deployment? I've encountered an environment where ...
2
votes
2answers
698 views

Can I put in laptop 2.5" SATA drives into an HP ProLiant DL380 G5?

I have an HP DL380 G5 server and I was wondering if can I put in standard notebook 2.5" SATA drives? In the front where the drives go, the SATA connections dont seem to fit.
1
vote
2answers
83 views

Install RAID1 without Second Hard Drive?

HP P410i Raid Card. I am waiting for a second hard drive to arrive. Is it possible to start with 1 hard drive and enable RAID1 without loosing data when the second drive is installed?
2
votes
4answers
5k views

HP ProLiant ML310e Gen8 early system initialization hangs on 90%

just unboxed a brand new HP ProLiant ML310e Gen8 Server. I can reach the iLO webinterface but the Server hangs on the early system initialization on 90 % with the status code 0114. I did not find any ...
-2
votes
1answer
242 views

HP DL360p Gen8 for low latency trading - what to upgrade? [closed]

I'm using HP DL360p Gen8 for low latency trading (but not ultra-low-latency!). It means that i'm working in frame about "10+ microseconds" and i don't care about "1-5 microsecond" or nanoseconds. I ...
0
votes
1answer
165 views

Refresh a specific page in ilo 4

I use iLo 4 for my HP dl380 gen 8. I access iLo webpage using internet explorer 10. (Although I would gladly use another browser if anyone can recommend a better one for iLo access). How can I ...
0
votes
3answers
480 views

Graphing temperature over time for HP iLo 4

Server: HP DL380p Gen 8, running latest iLo 4. One sensor, Sensor #25 for the HD Controller, tends to run a bit hot when compared to the other sensors. It tends to read 75 C. Caution temp is 100 C. ...
-2
votes
1answer
339 views

HP proliant microserver won't boot

I was installing an ethernet driver for VPN on an HP Microserver (on PCI 1). Then, suddenly the server shut down while I was installing it. When I tried to boot it back up it only shows the health ...
3
votes
1answer
735 views

DL380 G4 dead after erasing NVRAM

Got a used HP ProLiant DL380 G4 server. It was at least able to start from an Ubuntu live CD a few days ago. When I connected the iLO-port to a router with DHCP server iLO 1.62 was accessibly using ...
27
votes
2answers
5k views

HP ProLiant DL360 G7 hangs at “Power and Thermal Calibration” screen

I have a new HP ProLiant DL360 G7 system that is exhibiting a difficult-to-reproduce issue. The server randomly hangs at the "Power and Thermal Calibration in Progress..." screen during the POST ...
0
votes
2answers
2k views

How do I upgrade my HP ProLiant ML150 G6 server RAM?

I want to upgrade the RAM on two HP ProLiant ML150 G6. They currently have 2 dimms labeled 2GB 2RX8 PC3-10600E-9-10-E0. I believe these are UDIMMs? The servers have a total of 12 memory slots. In ...
5
votes
2answers
2k views

How to reset password for HP Proliant ML330 G6

We have HP Proliant ML330 G6 and its BIOS is closed with password. Password is already forgotten and we can't get there. Is there any way to crack or reset a password at this box?
7
votes
3answers
628 views

What is the name of this screw? (from HP ProLiant quick-deploy rail kits) [closed]

I need the name of the screw for the HP quick deploy rail kit. The screw clicks into the square holes of the rack. It is a Gen4 Rail kit but the screw is like the Gen8 Rail kit ones. I called HP ...
2
votes
1answer
138 views

ProLiant DL360 ASR

I have several ASR events on my DL360 G4p without any reason. There is nothing in the log file. I installed a remote syslog server. There I only see the rebooting messages. In the iLO nothing is ...
3
votes
2answers
2k views

How to make my HP server boot faster?

I have an HP ProLiant DL370 G6 server that I am using as a workstation. It takes 60 seconds during reboot and cold boot before screens post with a discrete Radeon HD6xxx GPU. What can I do to make ...
2
votes
2answers
286 views

How to get HP ASM to work under Xen Hypervisor?

I have a HP DL560, currently running Debian Squeeze as dom0 on Xen Hypervisor, and the fans constantly run at 100%. In the past this wasn't a problem because I could install HP's ASM which includes ...
1
vote
2answers
2k views

HP ProLiant DL360 G5 fails to reboot

Some history of this also available here. As of my latest update on the forum linked above, now cold reboot as well as hard reset and following boot for my proliant dl360 g5 works as expected and ...
0
votes
1answer
327 views

HP ESXi WBEM Agent Not Showing Power Supply Data

Server: HP ProLiant DL 380 G5 ESXi: 5.0.0 U1 (HP Custom Image) HP SIM: 7.1 (CentOS 6.3 VM) I have my basic hardware monitoring up and running. I cannot see events for power supply failure within HP ...
2
votes
2answers
609 views

Uncorrectable machine check

I am experiencing rare but real unrecoverable machine checks on HP DL370 G6 dual-core Xeon server. I ran memtest86+ before, and ran CPU-intensive operations without any problems. In your opinion, ...
0
votes
1answer
628 views

What's so wrong with the ML350 G5?

It seems there a number of differences between the HP ML350 G5 and G6 G6 has more RAM slots G6 runs leaner, cooler, and quieter When considering an equally spec'd G6 (CPUs, RAM, HD), the G6 is 3x ...
1
vote
1answer
854 views

Which version of SmartStart supports HP DL120 G6?

Version 8.70 for example does not support it - minimum 120G7. So cannot reinstall Windows Server on the old G6 here...
0
votes
1answer
388 views

HP ProLiant DL360 G7 watchdog

I have dl360 G7 servers. some times kernel got panic. I understood, that server have hardware watchdog timer. dmesg | grep wdt [ 6.344992] hpwdt 0000:02:00.0: PCI INT A -> GSI 16 (level, low) ...
4
votes
2answers
1k views

HP ProLiant DL360 G6 reporting missing fan

I have several refurbished HP ProLiant DL360 G6 servers and several of the systems are reporting fan failures - possibly incorrectly - on fan #2. When running: hpasmcli -s 'SHOW FANS' I get the ...
3
votes
2answers
906 views

Dell's equivalents for HP's hpasmcli and hpacucli tools?

As per title. Basically what are Dell's online tools for checking or changing BIOS/RAID-controller level conf. For Linux.
0
votes
1answer
587 views

HP DL385 Base System Device

I have an HP DL385 with two Operon 280 CPUs and 16 GB of RAM running Windows Server 2003 R2 64 bit. Windows device manager show a yellow question mark for the Base System Device. This device is the ...
0
votes
3answers
753 views

P4300 G2 SAN FAN Header Connections

I've recently had to replace the System Board on my P4300 G2 SAN due to a failure to find a boot drive. Unfortunately after replacing this it won't boot past the POST screen, it identifies that there ...
6
votes
1answer
757 views

Are keys for HP ML 150 G6 chassis all the same?

Recently we dragged a heavy box next to the HP ML150 G6 Server which had a chassis bezel key sticking out of it. So the bezel key broke in half. Is it possible to buy just a replacement key or they ...
1
vote
4answers
9k views

HP Compaq 8200 Elite SFF won't boot from USB drive

Can't get an HP 8200 Elite Small Form Factor to boot from USB. It's done so in the past & the USB boot drive works in a different machine (HP 8440p laptop). Have tried upgrading BIOS (from 2.09 ...
3
votes
7answers
8k views

HP ProLiant DL180 G6 Fan Noise?

Recently i did bought an HP ProLiant DL180 G6 Everything is OK except fan noise , it's too loud. I did some research but found nothing useful , I just wanted to know if there is anything I can do ...
2
votes
5answers
793 views

HP DL380 G3 2U For Basic Web Server in 2012

I have an opportunity to pick up a used HP DL380 G3 2U for $100. I'm looking for a basic entry level web server that I can host a small - medium size website on and more or less learn the ins and outs ...
8
votes
2answers
8k views

Controlling HP ProLiant DL380 G6/G7 fan speed

I'm having fan speeds and noise level issues from my most recent batch of HP ProLiant DL380 G7 servers. Most of the systems are nearly silent with low fan speeds (as reported by hplog -f). The ...
1
vote
1answer
237 views

is there any conflict between HP blade system ProLiant BL680c G5 hardware and Redhat Linux Enterprise 5.5 or 6

We're going to install Linux Red Hat enterprise 5.5 on HP blade server that is connected to a part of SAN storage MSA 2000. I've tested both marked and unmarked sda option in partitioning. I did this ...
2
votes
1answer
1k views

LaserJet M1522nF firmware was corrupted during the update

I have a LaserJet M1522nF, and the problem when I working on is that it is freezing every time so I decide to update the firmware. During the updating the device was down because of electricity so I ...
1
vote
1answer
58 views

Which controller should I buy for a SCSI-3 tape drive? [closed]

I have a HP StorageWorks Ultrium 960, which have a SCSI-3 interface. It is a quite old tape drive, so which SCSI controller should I buy? Update It is for PCI or PCI-X and the server is running ...
7
votes
2answers
2k views

HP ProLiant system preparation/deployment techniques (Array, BIOS, firmware, etc.)

I spend a lot of my time with HP ProLiant systems and Linux installations. Due to the nature of the business I work in, I don't have the luxury of being able to deploy large numbers of identical ...
7
votes
13answers
21k views

HP Proliant DL380 G4 - Can this server still perform in 2011?

Can the HP Proliant DL380 G4 series server still perform at high a quality in the 2011 IT world? This may sound like a weird question but we are a very small company whose primary business is NOT IT ...
9
votes
4answers
12k views

Incredible low disk performance on HP DL385 G7

As a test of the Opteron processor family, I bought a HP DL385 G7 6128 with HP Smart Array P410i Controller - no memory. The machine has 20GB ram 2x146GB 15k rpm SAS + 2x250GB SATA2, both in Raid 1 ...