My customer has an external RAID6 array (8x 1TB in HP MSA60 enclosure) attached to HP SmartArray P600 controller. They have now decided to replace the server and the new one comes with LSI MegaRAID ...
We have a RAID 5 setup (Megaraid SAS ROMB) with 4 930 Gb physical disks running as a 2.7 TB VD. Recently (a few months back) we had a drive fail and had to leave it in degraded mode for ages (various ...
I am in a bit of bad spot at the moment, i have a dedicated server hosted by someone else, it has a LSI 9261-8i raid card installed, attached is: 3x300GB SAS 15K rpm disks (in RAID5) 5x2TB SATA ...
I have a small GlusterFS Cluster with two storage servers providing a replicated volume. Each server has 2 SAS disks for the OS and logs and 22 SATA disks for the actual data striped together as a ...
I wanted to test performance in a RAID10 with a "damaged drive". To simulate this situation I've set a single drive to "Offline" by using this command: MegaCli -PDOffline -PhysDrv [45:12] -aAll The ...
I have 22 disks and would like to create a Raid 10. Unfortunately my raid controller (MegaRAID SAS 9260-8i) is only capable to handle 8 arrays within a RAID 10. Because of that I could only use 16 ...