0
votes
0answers
21 views

Unable to sign iLO certificate signing request

Im trying to sign a csr generated from iLO with our local OpenSSL Certificate Authority, however, I receive the following error: [root@ca CA]# openssl ca -in ilo6.csr -out ilo-esx01.crt Using ...
1
vote
1answer
93 views

HP DL180 G6: where is temp sensor #21

With the warmer summer days starting to hit, my server is increasingly going into thermal protection shutdown due to temp sensor #21 reaching critical level (58*C), as reported in ILO. The fans are ...
1
vote
1answer
57 views

HP Proliant G7 hardware RAID configuration automation with ribcl

I have been trying to automate hardware RAID configuration of HP proliant machines before OS installation (So I can not use hpacucli) ssh into iLO3 doesn't have option for RAID configuration I use ...
2
votes
0answers
60 views

ssh to ILO on a DL380 gives key_verify failed for server_host_key

When I try to do connect to the ILO 4 of a DL380 I get the following error: ssh -vvv ilo@me2_ilo OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data ...
1
vote
1answer
85 views

Access RBSU on ML350 G6 remotely

We have a remote server having issues and the HP Support guy suggested to "Disable No-Execute Memory Protection in the server BIOS." This is easy if you have the server onsite and there are many ...
2
votes
2answers
128 views

HP BladeSystem c3000 Enclosure : Ilo : Python : get_asset_tag() Not working

I try to connect to a HP Blade Server (HP BladeSystem c3000 Enclosure ) using Python's HP-ILO module. obj=hpilo.Ilo('172.8.2.29', login='Administrator', password='<redacted>', timeout=60, ...
-1
votes
1answer
121 views

HP ProLiant - Does ILO 2 Advanced offer additional SNMP or IPMI features?

We've got ML350 G5 servers with iLO 2 standard license. Does upgrading to higher iLO license will unlock new SNMP or IPMI data registers? If it will, which ones?
1
vote
1answer
58 views

Sideband on HP ILO2 and initial in-OS setup possible?

Is it possible to configure sideband (ILO being physically accessed from one of the main NICs as opposed to the dedicated ILO NIC) for the ILO2? Also is it possible to configure the ILO2 initially ...
2
votes
1answer
700 views

HP ILO utility for Ubuntu - hponcfg fails due to missing hp-ilo package

I'm working with an Ubuntu-based system running on an HP ProLiant DL360p Gen8 server. I prefer to install HP's management agents when I can for full hardware monitoring/configuration capabilities. ...
-7
votes
1answer
173 views

What are the functional differences in iLO 4 and iDRAC 7? [closed]

What are the functional differences in iLO 4 and iDRAC 7? Mainly in the working, features and what we can do with them. Please give a formal difference between them. It would be really helpful if you ...
1
vote
2answers
252 views

Check if an iLO board installed on a Windows machine

How can I check if a iLO-Board is installed on a Windowsmachine? I would like to do it via a script (python prefered). I thought about checking the connectionport. E.g.: If the iLO is connected via ...
3
votes
1answer
1k views

HP ProLiant DL360 G7 Server reconfigure iLO using ipmitool

I am struggling with an HP machine that has an iLO card that for some reason has gone off the radar. I can ping the card, but that's pretty much everything I can do with it. The host is running a ...
0
votes
1answer
71 views

CPQLOFG XML “Syntax error”

HP Lights-Out Configuration Utility- CPQLOCFG v. 4.00 dated 04/04/2012 Whatever input I use, whether a sample file from the HP Web site, whether an empty file or whether a file just containing ...
1
vote
1answer
852 views

hp ilo “remote console undefined”

After upgrading my server (HP DL360p Gen8) to the latest ILO 4.30 I have such error What should I do and how to fix my problem? I do not have physical access to my server and so now I have no ...
1
vote
2answers
552 views

ESXi 5.x unable to start sfcbd for hardware monitoring

I've been trying to configure my ESXi server to take advantage of hardware monitoring via iLO drivers. However, no matter what I do to try and start the sfcbd service, I get a list of menu options. ...
0
votes
1answer
447 views

Monitoring HP Proliant iLO whith perl script in Nagios

I'm trying to monitor an iLO with this script: ...
0
votes
1answer
191 views

Refresh a specific page in ilo 4

I use iLo 4 for my HP dl380 gen 8. I access iLo webpage using internet explorer 10. (Although I would gladly use another browser if anyone can recommend a better one for iLo access). How can I ...
0
votes
3answers
623 views

Graphing temperature over time for HP iLo 4

Server: HP DL380p Gen 8, running latest iLo 4. One sensor, Sensor #25 for the HD Controller, tends to run a bit hot when compared to the other sensors. It tends to read 75 C. Caution temp is 100 C. ...
1
vote
4answers
990 views

esxi 5.0 free + ilo3 + hp DL380 G7 = no ability to hardware monitor without HP SIM or vmware non-free?

ok so as stated in the subject line i have an HP DL380 G7 running esxi 5.0 free and an ILO3. Is there any way for me to get some decent monitoring of the hardware without paying any extra money for a ...
0
votes
0answers
425 views

HP Proliant ML150 G5 - Hyper V Server - 2012 - Hardware Monitoring

I've inherited a HP Proliant ML150 Gen5, I've installed Microsoft's free Hyper-V Server 2012, with minimal issue. I'm running VM's without issue, however I'm wondering what I can do for hardware ...
1
vote
3answers
772 views

No video on ILO3 (DL580 G7) after booting debian live

I'm having a problem with booting a Debian Live CD via iLO3 on a HP DL580 G7: In the moment the boot process finishes, the video on the iLO Java Console goes away and it just says 'No Video'. ...
3
votes
1answer
920 views

DL380 G4 dead after erasing NVRAM

Got a used HP ProLiant DL380 G4 server. It was at least able to start from an Ubuntu live CD a few days ago. When I connected the iLO-port to a router with DHCP server iLO 1.62 was accessibly using ...
3
votes
1answer
1k views

Updating ILO on HP DL380 G7 fails due to firmware version gap

I tried updating several HP Proliant DL380 G7 ILOs today to firmware version 1.50. Some had 1.15, some had 1.26. Those with the older revision refused to accept the firmware blob, the newer ones did ...
3
votes
2answers
200 views

Mass configure ILO?

Is it possible to mass change ILO settings with HP Systems Insight Manager? I am looking for an automated method of getting all my organizations servers power settings configured the same Ilo. ...
2
votes
2answers
1k views

Password setting for IPMI in Linux

I am trying to configure IPMI in my HP ProLiant Servers. Configuration looks successful , but somewhat confused with the 'Administrator' user account . Following are some information on IPMI in one ...
4
votes
1answer
259 views

Two HP iLOs have gone unresponsive, and are in a colo. Is there any way to remotely troubleshoot?

We have two DL360 G5s that suddenly lost iLO connectivity. They are at a remote site, so I cannot do any physical troubleshooting (yet). Is there any way I can remotely troubleshoot the iLO? Currently ...
0
votes
3answers
506 views

Can you enable the ILO NIC on HP servers remotely?

I suppose I am 99.99% sure it cannot be done since you need either ILO IP or DNS name to connect, but I'm hoping to be proven wrong. Is there a trick perhaps to enable it via RIBCL and cpqlocfg.exe?
1
vote
0answers
246 views

HP ILO 2 XML POST

I am using the following code on my ilo 3 or 4 machines successfully in order to get a response and parse it for information: public string doiLO3Request(string requestRibcl) { ...
0
votes
2answers
2k views

HP ILO 3 gives XML syntax errors with hponcfg utility

I have an HP ProLiant DL360 G7 server running VMWare ESX 4.1. The system board on the server was changed months ago following a lightning strike at the facility. The HP technician reprogrammed the ...
1
vote
2answers
866 views

I configured HP ILO, now I get hponcfg errors

Just installed I-Lo a few days back to one of my servers (Proliant DL380 G7). Lights-Out Online Configuration Utility picked up a DHCP based IP address and I changed it to static. Lights-Out said it ...
-1
votes
3answers
649 views

HP ILO holding a IP but I am not using the ILO ports

I have three HP servers on my domain. One of them is tying up one of my IP's for an ILO management page but I do not have any network cabling connected to the ILO port on any of these servers. How ...
4
votes
1answer
2k views

Why does the CentOS 5.8 install give an error about CD-ROM drive when using HP ILO?

CentOS 5.8 I'm trying to install CentOS 5.8 on the following system with the following specs: HP DL360e Gen8 HP Dynamic Smart Array 8320i RAID Controller ILO 4 v1.05 I'm connecting the ISO to ...
0
votes
2answers
547 views

HPONCFG use variable as input instead file?

I'm currently writing a script to get all the embedded health of an ILO. What I want is to avoid to create file, so I've create my xml request but I tried with no success with the /i parameter of ...
7
votes
2answers
10k views

Can't enter iLO3 at bootup (HP ProLiant DL360 G7)

At first I thought this was a fluke, but I've now built well over 50 of these servers and I can't seem to find a solution. We are deploying HP DL360 G7's. Before you used to be able to hit F8 during ...
1
vote
1answer
465 views

HP iLO2/3 cli: send NMI

I want to send a Non-Maskable Interrupt (NMI) to the system over the HP iLO2/3 cli. Unfortunately I don't know the correct syntax or target: hpiLO-> nmi status=2 status_tag=COMMAND PROCESSING ...
0
votes
1answer
3k views

DL380 G7: Not able to access ILO on DL380 via ssh from a client

I have problem where I can't access my ILO(ssh to ILO IP) thru client which is in different network.I am able to ping ILO IP thru this clinet but ssh access is not possible. Is it possible to have ...
0
votes
2answers
553 views

Remote RIB iLO on Proliant via RIBCL

I'm trying to automate a process for our Ops. The process requires that some windows servers running on blades are shut down, left down for a few hours, the restarted when some other processes ...
1
vote
1answer
309 views

HP Proliant 380 G4 iLO stuck in recovery mode

The iLO interface on this server is stuck in recovery mode. I've tried flashing the firmware via FTP per the iLO manual. It seems like the flash succeeds & the iLO interface resets, but it comes ...
0
votes
1answer
1k views

Entering BIOS via HP iLo2 remote console

I want to enter BIOS remotely via HP iLo2 remote console. However, I tried to press F8,F10,Esc-8 and Esc-10. None of them works. Could someone teach me how to do so? Thank you. Regards, yuwen
0
votes
1answer
595 views

Can I reset an HP p-class enhanced blade chassis iLO to defaults manually?

I just came into possession of a p-class HP BladeSystem enhanced chassis with eight BL25p blades and two CGESM interconnects. I didn't get a SUVI cable so I can't interact wit the blades directly. I ...
4
votes
2answers
1k views

linux - HP BLADE machines - identify the Server name from my Linux OS

I have a Linux machine (RedHat version release 5.6) in HP BLADE Hardware I am trying to find a solution to identify the server name from my Linux OS (Linux installed in the HP Blade HW), (Server ...
4
votes
5answers
13k views

Configuration of ILO port on HP servers

I have a HP server that has ILO port. How can i configure it to use from remote location? server os is debian-squeez.
3
votes
3answers
1k views

Setting the timeout for HP iLO VSP in order to catch kernel panic

So i have a server that has locked up twice recently. What i want to do is catch any kernel panic/oops written to the serial console. I can ssh in and start the VSP and i'm running my SSH session in ...
4
votes
4answers
8k views

HP dl170 g6 and LO100 (iLO) - Can't boot from virtual media

I'm trying to make an HP DL170 G6 server boot via the "virtual media" feature. The system doesn't even try to boot from the virtual media, it seems unable to see it! Here's the test we've been doing: ...
4
votes
1answer
1k views

HP Insight Manager setup and use case?

I keep reading about HP Insight Manager in various blog posts and Server Fault questions. I am currently working with 3 HP ProLiant DL360 G4's, 2 DL380 G3's and a ML110 G6. All have iLo installed and ...
2
votes
1answer
4k views

HP ProLiant DL360 iLO usage?

I have just purchased (from eBay) a HP ProLiant DL360 rack server for use as an additional domain controller on our network. I noticed that it has a label on it with iLO Default Network Settings such ...
3
votes
2answers
1k views

HP ILO RIMP information?

The HP ILO scripting guide gives an example of an unauthenticated xml query: "https:///xmldata?item=all" (See page 46, http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00294268/c00294268.pdf) ...
0
votes
2answers
2k views

How can I set HP iLO2 to support Active Directory Domain Name logon?

We currently using default iLO 2 active directory logon schema. but we are not able to logginh using Domain name account format, John@domain.com or domain\John, How should I set the iLO 2 that ...
5
votes
4answers
6k views

Configure HP Lights-Out LO100i from the host operating system?

I have a system situated in a co-location facility running Windows Server 2008. The hardware is an HP DL165 G7 and features four NIC interfaces. NIC1 is also a shared management port for the ILO 100i. ...
2
votes
1answer
2k views

How do I resolve certificate errors on HP blade center

I'm trying to sort out the ssl certificate errors that we get when trying to manage our HP c7000 blade enclosures. To that end I have created a signing certificate and imported it into the browser. In ...