1
vote
1answer
36 views

Optimize unused space in RAID5 due to bigger HDD in spare parts change

I have started with 3x250 GB SATA array, but the old HDDs failed one by one and when the spare parts came they where bigger disk inside and I recently ended up with 3 HDDs of 500 GB. I see ...
-1
votes
1answer
375 views

Repair HP SmartArray p410i

i have an HP proliant server and in the last 4 years i never had a single problem with it. but yesterday i found out that i cant remotely login to my server so i went over and found that one of three ...
3
votes
1answer
39 views

Raid 5 on two scsi buses with different maximum speeds

I'm quite a noob, I'm trying to set up as a study machine an old HP ProLiant DL385 G1. I've configured a RAID 5 out of six SCSI 3.5" HDDs using: - Smart Array 6i controller; - (4 x SCSI Ultra320 ...
3
votes
1answer
81 views

how to determine which drive belongs to which slot on raid 5

i have an HP DL380 G8 machine with 4 hard drives of same size and running on raid 5. unfortunately during a service process of our data center one of the junior team members pulled out all four hard ...
1
vote
1answer
522 views

logical drives on HP Smart Array P800 not recognized after rebooting

We had a Smart Array P800 configuration working fine (RAID5). Physically, we have a disk enclosure (like this) connected with a Linux Server. Here is what happened: This server was accidentally ...
3
votes
1answer
132 views

RAID 5 drive upgrade

We have an HP ProLiant ML350 G5 server with an 8-bay RAID 5 array configured on a Smart Array E200i controller. The system volume and data are on the same logical drive. The drives are 72GB each and ...
1
vote
2answers
455 views

Proliant Server E200i Raid Controller does not see array

Help! My server was configured with 3 arrays: array 1 and 2 were each 136Gb raid 5 using the first 5 drives. 3 x 72Gb and 2 x 300Gb. Array 3 was 3 x 500Gb using drives 6 7 8 for 1Tb. I had a ...
-1
votes
1answer
166 views

Building recovery plan for HP DL380 G7 server [duplicate]

Possible Duplicate: Disaster recovery plan development best practicies or resources? I need your help to find out best practice to maintain my server and be ready for any kind of disk error ...
1
vote
3answers
7k views

How to replace failed drive in RAID 5 array in HP DL380 G4 server

Sorry for not providing more information when I previously posted this question. More detail is provided below. Any feedback would be welcome. I have a HP DL380 G4 2U server which has 6 drive scsi ...
-2
votes
2answers
1k views

HP MSA60 complains that new drives are faulty

We got some replacement drives from HP PN 454273-001 1TB 7.2k drives. We put them into the msa. It completes rebuild but when we run the hp insight diagnostics tests. It comes back as read write error ...
5
votes
2answers
880 views

Reusing Raid 5 Drive?

We have two servers (ML530 G2 and DL380G2) w/ identical HP 10K RPM SCSI drives w/ a raid 5. One is decommissioned and the other will be decommissioned shortly. However, one of the drives on the ...
2
votes
1answer
2k views

Repurpose spare drive in HP ProLiant RAID 5 array

We have 8 300GB SAS drives in a RAID5 + Spare configuration. It seems data capacity planning came up a bit short and I need more disk space. Instead of replacing drives with 600 GB models, I would ...
-3
votes
1answer
3k views

Extend RAID 5 to use unused space and add additional disks?

I am new to RAID. I want to extend an existing RAID 5. The current setup is as follows: Array A unused space : 349956 MB logical drive :1 total size 273GB raid5 disk : /dev/cciss/c0d0 physical ...
2
votes
3answers
4k views

“Parity Initialization Status: In Progress” for long time

Two weeks ago I installed 6 new hard disks (HP 500GB 6G 7.2K SFF 2.5-inch 2-ports SAS DualPort Midline, 507610-B21) in a "HP DL 380 G5" with a "Smart Array P400" (RAM Firmware Revision 2.08, ROM ...
0
votes
1answer
715 views

Removing or Adding a disk to a HP MSA60 array crashes everything

I am really new to RAIDs and all that goes along with them. I simply added a disk (same 500mb size and part number) into the MSA60 raid enclosure and basically everything started going wrong. The ...
6
votes
2answers
4k views

Convert a Smart Array RAID5 array to a RAID6 (ADG) variant

I have an HP MicroServer (N36L) with a SmartArray P410 controller, a 512MB BBWC unit and four (4) 2TB disks connected. Three of those disks are configured as a single RAID5 array and one is left ...
-1
votes
1answer
142 views

proliant 380gl g5 raid drive rebuilt but leds are both lit bright green

After replacing a failed Raid 5 146gig SAS drive in logical drive 2 yesterday the system reports all is good but the LEDs on the front of the drive are both on and the one on the left is bright green. ...
3
votes
1answer
4k views

RAID5 on SmartArray P410i online resize

I have P410i+256M Cache without battery backup. My RAID5 was build over 3*136GB disks, now all disks were replaced to a 3*300GB array. How can I extend it to use the whole space? HPacucli doesn't ...
0
votes
1answer
2k views

Rebuilding RAID 5 in HP Proliant ML 370 G5 Server

One of our customer having HP Proliant ML370 G5 server with Windows 2003 SBS.That having 2*72GB(Single Port10K Serial SCSI) and 3*146GB(Dual port10K SAS) harddisks.Now that is going to full.I want to ...
2
votes
2answers
2k views

Moving a RAID-5 array from a dead HP ML350 G5 to an HP DL380

We have an HP ML350 G5 with a 3x72GB RAID5 array that we were in the process of decommissioning. After shutting down the server and moving it, but prior to moving the data elsewhere, the server ...
1
vote
1answer
1k views

HP DL380 RAID5 Mistake

I had drives fail in both logical drives on a server. When I replaced failed 146GB drive in Raid 5 array with four (4) 146GB drives. On reboot the Smart Array controller asked if I wanted to accept ...