1
vote
2answers
24 views

Unsupported Storage Connection Detected on HP DL380 Gen8

I'm hoping this is the right place to ask. I recently received a new HL DL380 Gen8 server, on which I want to install Server 2012 R2 via Intelligent Provisioning. According to the specifications, ...
0
votes
1answer
68 views

HP ProLiant ML350e Gen8 v2 Not Detecting Hard Drives

I have tested several solutions but non of them cant detect my 2 hard drives (legacy mode , acpi and raid embended) I have a 2 Dell-Seagate SAS Cheetah 15k,7 hard drives (ST3300657SS) (they are not ...
3
votes
1answer
102 views

Steady red light on 2 HP SAS drives in RAID 1

I have a HP ProLiant web server with two HP 300GB SAS SFF 2.5 inch drives (Model: HP 507127-B21). Both drives have a solid red light, however there is no indication within the management software that ...
0
votes
1answer
64 views

Is it possible to use a HP P410 Controller in a ML150 Gen5 server? i.e. is there a cable that interfaces with a Gen5 cage?

Specifically I want to use a SAS card (a P410) and some drives that I have spare in a ML150 Gen5 server. If there is a cable that converts mini SAS to the Gen5 SAS cage connection can someone point ...
1
vote
1answer
303 views

HP DL380 G7 using P410 controller with a SAS Expander card

A sever is fitted with a HP SAS Expander card and 10x disks (2x mirrored Arrays). The server is not detecting any logical volumes or physical disks. So is it ok to bypass the expander card and ...
2
votes
1answer
376 views

HP ProLiant with SATA/SAS Drives

I Currently have a DL350 G5. I have 4 74GB SAS drives in RAID that work fine but I tried to add a 1TB WD RED SATA drive for some storage and the RAID controlling isn't giving me an option to create a ...
2
votes
2answers
320 views

HP DL380G6 + MSL2024 LTO6 SAS : Which HBA? [closed]

I'm going to upgrade our backup server and I'd like to confirm that the following specs won't choke after the purchase. It'd be great if you could tell me your opinion Our current setup is: HP ...
3
votes
1answer
322 views

Format SAS drives HP DL360G6

hoping you can point me in the right direction here. I scored an older HP DL 360G6 and have been having issues installing ESXi. After a bit of searching around a few people suggested completely ...
0
votes
1answer
114 views

Which controller for external SAS tape drive

We're about to buy an external LTO-4 tape drive for our HP DL380g6 server, and since SCSI is on the way out, we'll buy a SAS drive, probably the HP StoreEver LTO-4 Ultrium 1760 SAS External Tape Drive ...
2
votes
2answers
250 views

What cable do I require for SFF-8087 to SAS

I have a HP P410 and two 2.5" SAS Drives, i want to connect both those SAS drives to one port. I know the cable for the P410 is a SFF-8087 and ive seen plenty of adapters searching, but alot of them ...
2
votes
1answer
3k views

Installing Ubuntu 12.04 on HP Proliant DL380e with 1TB SAS Drive

I have an HP Proliant DL380e with a 1TB SAS Drive and I am trying to install ubuntu server 12.04 on it. I have created a RAID array using Array Controller Utility and had a RAID0 logical volume ...
1
vote
1answer
185 views

Using both expanders in HP D2700

I am considering purchasing an HP D2700 for use with SSDs (Samsung Pro 840's), for use in realtime playback of high resolution images. The D2700 has two I/O modules (which I assume are the actual SAS ...
-1
votes
2answers
108 views

Is it ok to run 15k.6 and 15k.5 SAS disks in a SAN together?

I have a SAN (HP MASA 2012) running seagate Cheetah 15k.6 drives. One has failed and I have a replacement drive that is the same except for it is a 15k.5 drive. Is this ok to run in the SAN? What are ...
0
votes
1answer
426 views

HP ProLiant DL360 G4p compatibility with external SAS enclosure

I have a ProLiant DL360 G4p and a StorageWorks MSA60. The SmartArray controller currently in the DL360 is a SmartArray 6400. I would like to upgrade it to a controller with external mini SAS so I ...
2
votes
1answer
756 views

Third-party SSD in Proliant g8?

Anyone having success with third-party SATA or SAS drives with Proliant G8's? I know the G7's were flaky and had BIOS issues. We're looking for real-world success stories with particular brands and ...
2
votes
3answers
2k views

Can I use a Smart Array P410 controller on a HP Proliant DL 180 G5 server?

This link says the HP Proliant DL 180 G5 server only supports Smart Array E200, E500, P400 and P800 controllers. Can I use a Smart Array P410 instead? Currently the server has only the default ...
0
votes
2answers
284 views

HP SAS HDD in an EMC VNX storage?

Would it be possible to use HP SAS 6G DP 300GB 10K SFF drives in an EMC VNX 5100 storage unit, which currently holds EMC 10K SFF drives (these are really Seagate Savvio 10K.5 SFF drives). Generally, ...
6
votes
1answer
2k views

replace controller, add second controller, or use expander?

I have a Proliant DL380 G6 that I am re-purposing as a Hyper-V host for a new, off-site data center that will host our DR services. The server currently has a P410i controller with the 512MB BBWC ...
7
votes
5answers
725 views

ML350 G5 - upgrade hot swap drives to 6 Gb/s?

I support a non profit. They got an ML350 G5 donated to them and I immediately put it to good use for them :) It came with four HP 300GB 15K SAS drives - and of course, they have all now failed. I ...
2
votes
3answers
2k views

PostgreSQL server: 10k RPM SAS or Intel 520 Series SSD drives?

We will be expanding the storage for a PostgreSQL server and one of the things we are considering is using SSDs (Intel 520 Series) instead of rotating discs (10k RPM). Price per GB is comparable and ...
2
votes
1answer
813 views

HP MDS 600 compatibility questions

I've bought a used HP MDS 600 to use as JBOD to a ZFS filesystem. Originally I just assumed that it was a pretty 'dumb' box and I'd be able to use a SAS card like the 16-port LSI one, and most any ...
4
votes
1answer
5k views

Mixing dual and single port SAS disks

I have a HP DL380 G5 with 8x146GB single port SAS SSF disks (DG146ABAB4). A couple of them have failed and I can't find any new single port disks anymore. They all seem to be dual port. I'm wondering ...
3
votes
4answers
4k views

HP D2700 enclosure and SSDs. Will any SSD work?

I've got an HP D2700 enclosure that I'm looking to shove some 2.5" SSD drives in. Looking at the prices of HP's SSD drives vs something like an Intel 710 and even something less 'enterprisey', there's ...
3
votes
3answers
251 views

HP SAS hdd in non-HP server

I wonder if I could re-use some HP SAS drive in a non-HP server. Description: 146GB 2.5" Serial Attached SCSI (SAS) SFF 3G Single Port Hot-Plug 10K HDD Option Part# 431958-B21 Spare Part# 432320-001 ...
1
vote
2answers
3k views

HP StorageWorks MSA60 SAS attached enclosure: how to manage online on Windows?

We have a HP StorageWorks MSA60 SAS attached enclosure, with 12x1Tb SATA disks, connected to a P800 controller. Until now, they were used with a Linux server under the control of an external company. ...
1
vote
3answers
1k views

SSDs or 15k sas for server OS / application drive?

I'm thinking about upgrading the OS / application drive for an HP DL 580 G5 running windows server 2003 64-bit. We currently use 3 75GB 10k rpm SAS drives in RAID 1. The server is mainly used for ...
4
votes
2answers
1k views

SAS enclosure doesn't restart - MSA60

I just inherited a HP StorageWorks MSA60 (this is a direct-attach SAS enclosure). I had to move it to another shelf so I turned off the computer which was using it. I also pulled the 2 power cords off ...
2
votes
3answers
771 views

What's the relation between “HP Diagnostics” the “Array Config Utility” and “Windows Disk Manager”

I have a failed drive that is reported in HP Diagnostics https://localhost:2381/hpdiags/frontend2/frontend.php? It tells me that Logical Drive 5 has a drive that is about to fail. The name of ...
0
votes
2answers
443 views

HP P411 Storage Controller not recognized during boot

it's me again :( I've asked a question here a few minutes ago ( HP B110i controller not seeing storage array. Any ideas? ) Turns out I was wrong, and there IS a P411 controller built in, I verified ...
0
votes
3answers
2k views

HP B110i controller not seeing storage array. Any ideas?

We got a new HP ProLiant DL160G6 with internal P410 SAS controller, and an additional B110i SAS controller with external ports that is supposed to connect to the HP Storageworks D2600 Drive Array we ...
1
vote
1answer
221 views

HP P410i as online spare

Is it possible to have dual P410i SAS controllers and use one for a online spare? I am fairly new to HP servers and I will be setting up a new G7 for production use. I have been reading about HP's ...
1
vote
2answers
564 views

Shrink an HP Smart Array on a P400

I just started consulting for a new client and one of 6 hard drives in their server's SAS array failed. Going over the options of replacing the drive, they didn't like the thought of spending about ...
1
vote
1answer
2k views

HP Autoloader mount, ESXi 4.1 through SAS - will it work?

I need to figure out if I can get this to work. I have a HP P2000 Storage system, connected to 2 x HP DL360 G7 through SAS. Then I got an HP Autoloader with connected through SAS too. Will I, in ...
1
vote
1answer
364 views

HP DL180 and External SAS Tape Backup Drive

Is is possible to use the following PCI-E card with a HP DL180 server (specifically the 487507-371 model) - HP 4x Internal/4x External SAS PCI-E Adapter (416096-B2). If not what are the options for ...