HP (Hewlett-Packard) is a server and network equipment manufacturer. This is a generic tag to be used when discussing HP hardware or software with no more specific tag available - See the list in the main tag wiki.

learn more… | top users | synonyms

0
votes
1answer
132 views

HP Proliant DL360 G6 Wont Detect SSD

I have a hp Proliant DL360 G6 It has 4 hard drive slots and I have 2 Intel 80GB SSDs and 1 WD 160GB regular hard drive. I have tried the WD in all 4 slots and each time it detects it and boots right ...
1
vote
1answer
128 views

How to activate NUMA in HP Proliant DL580 G5 Server?

Currently I am working on a task regarding one server with NUMA. The OS running on the server is Ubuntu 14.04.1 LTS. The server has 4 nodes of 16 cpus: Intel(R) Xeon(R) CPU X7350 @ 2.93GHz, i.e. each ...
0
votes
0answers
17 views

BIOS ORCA Conflict

I have an HP raid controller that tries to run ORCA while the motherboard is running its BIOS startup sequence. When a drive is connected, the BIOS freezes and beeps sequentially. When F8 is pressed ...
0
votes
2answers
558 views

iLO 2 remote console NO VIDEO?

my HP ProLiant DL380 G6 server is running fine but iLO does not show any image "no video when" iLO firmware has been upgraded to latest version --> 2.25 04/14/2014 I am using internet explorer 11 to ...
-4
votes
2answers
87 views

How can NIC's remember the DHCP address past power off? [closed]

I have now seen an HP ProLiant DL385 G7 (573088-421) and HP ProLiant DL360p Gen8 both being able to remember the DHCP address for its NIC's even though I had powered off the server, and pulled the ...
1
vote
2answers
77 views

Install HP drive in Dell PowerEdge 2950?

First, I do agree that what I'm asking here is certainly unsupported by either HP or Dell. I'm just exploring some options here. The scenario: We have a server, a Dell PowerEdge 2950, running SQL ...
1
vote
1answer
141 views

What could be the reason of an HP Proliant ML110 G6 server to restart automatically?

We have a HP Proliant ML110 G6 server running (Windows 2012 Server R2) which is giving problem since last few days. The problem is that it restarts automatically and randomly. By restart I mean to ...
2
votes
0answers
58 views

HP MSA 2312 XML API “Unauthorized access requested”

I'm trying to write a custom Nagios Plugin to monitor a HP MSA2312fc via the HTTP XML API. I can successfully log into the system via /api/login/{login_hash} but always get the error "Unauthorized ...
1
vote
1answer
161 views

HP ProLiant DL380 G5 BIOS Settings Wont Stay

Due to a damaged PCI-E interface, the motherboard was replaced on this HP ProLiant DL380 G5. Every boot the POST reports: System currently defaulted to typical configuration settings Any ...
5
votes
1answer
315 views

Identifying what caused a server reboot

I have an HP ProLiant DL380p Gen8 that is running VMWare ESXi 5.5. It has been rebooting itself at seemingly random intervals for the past 24 hours. There is only a single VM running, and even if I ...
1
vote
1answer
167 views

Setting up multiple HDD's in HP ProLiant MicroServer G7

I have a HP ProLiant MicroServer G7 N54L which came with one 250Gb hdd which I installed Ubuntu on. It also has a 2Tb external USB hdd connected - all this, is working perfectly fine. When I loaded ...
1
vote
2answers
162 views

Unsupported Storage Connection Detected on HP DL380 Gen8

I'm hoping this is the right place to ask. I recently received a new HL DL380 Gen8 server, on which I want to install Server 2012 R2 via Intelligent Provisioning. According to the specifications, ...
2
votes
1answer
30 views

Using different tape drives with different servers

I am using HP MSL 2024 LTO 6 Fiber and backup exec 2012. My tape library has two magazines with one tape drive. I want to have two separate backup exec software but currently using only one drive. If ...
1
vote
0answers
57 views

HP 5120 vlan not working

So I have this odd issue with our HP 5120 switches. The VLANs will not pass traffic unless a interface with a IP is assigned to the VLAN. Problem is there is a limit of 8 VLAN interfaces that are ...
-2
votes
1answer
145 views

Server restarted while rebuilding array, what to do? [closed]

It's a HP ProLiant DL380 Generation 7, that has four hard drives, one is dead, I suppose that another one is dead too, but is there any way to force the array to rebuild again? The server has ...
0
votes
1answer
126 views

HP DL380 G7 Losing Drive Array

I have an HP Proliant DG380 G7 dropping one of it's arrays every hour, on the hour, for 2-5 minutes. The OS is SBS 2011 Standard, the servers runs Exchange, DC, files & Trend WFBS 8. I can watch ...
0
votes
1answer
3k views

Configuring RAID1 on HP Proliant Microserver N54L / Ubuntu 14.04.1 LTS [duplicate]

I've bought a N54L and fitted two 3GB drives. Keen to get set up with RAID1. BIOS: SATA controller mode set to "RAID" RAID Option ROM utility: both physical drives set up as one logical drive When ...
0
votes
1answer
782 views

HP ProLiant ML350e Gen8 v2 Not Detecting Hard Drives

I have tested several solutions but non of them cant detect my 2 hard drives (legacy mode , acpi and raid embended) I have a 2 Dell-Seagate SAS Cheetah 15k,7 hard drives (ST3300657SS) (they are not ...
0
votes
1answer
452 views

Kernel Panic - Not Syncing: Fatal exception

Server (HP Proliant D320e G8 v2) froze at this screen during boot today (running CentOS 6.5): I was able to get the server to boot after a 'press and hold'. I've been having many problems with the ...
1
vote
1answer
273 views

HP ProLiant DL380 G6 with 2 x Intel x5650 CPUs

I have an old HP DL380 G6 server, I am trying to upgrade the processor. I added 2x X5650. but each time I powered the server on, the fans stat working loudly and keep like that. the server never never ...
1
vote
1answer
182 views

CentOS 7 Install Error: Call to StartServiceByName Timeout

I'm trying to install CentOS 7 on my HP Proliant DL320e Gen8 v2 server. I'm attempting this through the iLO4 IRC and virtual media. I'm booting 'CentOS-7.0-1406-x86_64-Minimal'. I get to the first ...
1
vote
2answers
126 views

Can a Sun rack be converted to a normal rack?

The Sun rack with PN 595-5953-01 does not use the normal rails like HP and IBM uses. Does there exist Sun rails so standard servers can be put in it? Or perhaps those L-shelves, where you lay the ...
1
vote
2answers
497 views

HP 2510G Loop Protect doesn't work

I have a problem with Loop-Protect on a HP 2510G Switch. I configured Loop-Protect with loop-protect all receiver-action send-disable and set transmit-interval 1 and disable-timer 30. I tested my ...
1
vote
1answer
73 views

Wrong keyboard layout with HP RAC and KVM Viewer

I am currently working with a ProLiant N54L Microserver and a HP Remote Access Card. I access the server through my Mabook with a German keyboard layout. On installing Ubuntu, the installation cant ...
2
votes
1answer
526 views

Why isn't my RAID array rebuilding?

Got a notice last night that a drive failed on a server. Got in this morning to replace it, and we're getting the following. Controller config report for the array looks fine, with the unusual status ...
3
votes
2answers
367 views

HP ProCurve 5406zl does not accept direct attach cable with error “Not an HP Networking transceiver”

I have an HP 5406zl switch running the latest firmware in the non-early release branch (K.15.14.0007, ROM K.15.30) and it is not accepting direct attach SFP+ cables in its SFP+ module. The module is a ...
29
votes
1answer
1k views

Is it possible to influence the way CPUs are enumerated under Linux?

I have a HP DL380 G7 with 2 mismatched CPUs in it. One is a quad core CPU with faster cores, and one is a 6 core CPU with slower cores. On this box I run an application that due to licensing reasons ...
2
votes
1answer
57 views

Will I lose current disk contents if I re-enable onboard RAID on a ProLiant DL320 G5 server?

I have this HP ProLiant DL320 G5, acting as a domain controller, running Windows Server 2008 R2. The server has 2 SATA disks, which were configured in a RAID 1 volume using the system's onboard RAID ...
2
votes
2answers
256 views

Cannot disable mac restriction on port for HP Procurve 2626

I have a HP Procurve 2626 as the main trunk for several subnets in production. I am a UNIX systems administrator and not a networking guy, but I've worked with cisco switches and some of these HP ...
1
vote
1answer
61 views

NTP Server in Network Switch

Is it possible to set up a Switch to acts an NTP Server for the devices connected to its VLAN ? If so ,how can I implement it my HP Switch A3600 JG299A. I want to do this because I do not have ...
1
vote
1answer
43 views

Optimize unused space in RAID5 due to bigger HDD in spare parts change

I have started with 3x250 GB SATA array, but the old HDDs failed one by one and when the spare parts came they where bigger disk inside and I recently ended up with 3 HDDs of 500 GB. I see ...
0
votes
2answers
977 views

HP ProLiant Gen8 BIOS settings for VMware ESXi

What BIOS settings should be set on a HP BL460c Gen8 server so that ESXi 5.5 runs correctly?
0
votes
0answers
63 views

HP 5800 VLAN Translation

I have a network of HP 5800. We route customers on different CVLANS but have them all within the same SVLAN. I have a PPPoE server that runs on 1 switch on VLAN 1500. Example: Site1: 1000:2 Site2: ...
0
votes
1answer
103 views

RAID 10 Cluster Size for SQL Dynamics AX Database

Many article read and many websites visited yet still no closer to a firm or concrete answer. We have created all our Arrays for our SQL 2012 installation with the appropriate LUN's and understand ...
0
votes
1answer
74 views

How can I use an HP LaserJet M1536dn printer as a fax machine (outgoing) on Windows Server 2008

I'm running Windows Server 2008R2 and I'm trying to set up an HP M1526dn as a fax machine (this is a multi-function device). The printer is not directly connected to the server, but is on the network, ...
0
votes
2answers
143 views

How to replace SCSI with SATA or adapt SCSI to SATA drives

At first, I apologize for my question, but I am complete beginner. My friend gave me an old HP Proliant DL385 server which was replaced in bank, where he works, by newer stuff. Because of privacy, ...
0
votes
0answers
73 views

network trouble with hp bl465c g7 and rhel6.5

I have an HP BL465c g7 that worked fine with RHEL6.3. After upgrading to 6.5 the network stopped working. Can ping itself but no the gateway or anywhere else. IPtables are clear, eth-tool reports a ...
-4
votes
1answer
117 views

use HP Procurve switch 5400zl as router between 2 networks [closed]

I have a this network to explain : --------------------- ----------------------------- | HP Procurve Switch | (A25) <----------> (Fa0/0) | Cisco Router As ...
4
votes
1answer
2k views

Proliant DL380 G7 won't boot, solid amber power LED

I have a problem with an HP Proliant DL380 G7 that leaves me without much in the way of troubleshooting approaches. This server will not boot. It was stored in a datacenter, and I went to retrieve it ...
5
votes
1answer
622 views

Firmware update failures due to filesystem corruption on iLO3

I have a few dozen HP servers with iLO3 cards where the firmware update fails. When I try to update by uploading the .bin file via the web interface, I get a nondescript message saying "The last ...
0
votes
1answer
70 views

Is an HP Proliant 350e Gen8 server appropriate for Primevera and Sage applications? [duplicate]

I want to buy a server to accommodate both the Primevera and Sage applications? Would a HP Proliant 350e Gen8 do? Are there any concerns about this platform?
3
votes
1answer
5k views

CentOS 7 x64 and HP Proliant DL360 G5 SCSI Controller compatibility

I've an HP Proliant DL360 G5 server with two 72gb HDD in RAID and 2 150gb HDD in RAID. I've Windows Server installed on the 72gB HDD and I'm now trying to overwrite it with a fresh installation of ...
2
votes
3answers
629 views

Performance of HP SSDs in HP servers

I am trying to find performance data about the official SSDs offered by HP for their servers. I can hardly find any specifications on the HP website or somewhere else on the Web. The device I am ...
2
votes
1answer
838 views

HP Smart Array P410 Stuck in Ready for Recovery 00.0%

We are using smart array disk controller P410 by HP on our supermicro server. Sadly of the HDDs in a RAID10 Array was damaged and we were forced to change that specific hard disk. After 3 days and ...
2
votes
2answers
622 views

HP Proliant DL360 G7 All DIMM indicator lights amber

I am currently doing a RAM upgrade on an HP proliant DL360 G7 server. After installing the new RAM (18x 8GB KTH-PL316E/8G) the LED indicator lights for every single DIMM turned amber and the health ...
-2
votes
1answer
166 views

Data recovery from deleted raid array

Hello I deleted a raid 1 array on a hp b110i and I wanted to know if it is possible to recover the data. Also if Windows server was on the array that was deleted can it be recovered. Thanks
2
votes
1answer
681 views

HP Proliant Gen8 boot failure after bios upgrade and processor upgrade

We have a HP Proliant DL360P with one Intel Xeon e5-2650, and we was in need to use two Xeon e5-2670 V2, this server by default this G8 did not recognizes the v2 processor, so we found this procedure ...
4
votes
1answer
127 views

HP DL180 G6 amber light but drive is OK

We have an HP DL180 G6 with 25 SFF SATA drives, running 64-bit Debian Linux. A drive recently failed, so we replaced the failed drive with a new, identical part from HP. The disk controller rebuilt ...
3
votes
1answer
391 views

HP ADU report information. Where is it stored?

I'm working on something but I'm a bit stuck. If I could figure out where certain information that ADU looks at is stored on Windows Server (2003 & 2008), I'd be in great shape. I primarily want ...
3
votes
1answer
264 views

Steady red light on 2 HP SAS drives in RAID 1

I have a HP ProLiant web server with two HP 300GB SAS SFF 2.5 inch drives (Model: HP 507127-B21). Both drives have a solid red light, however there is no indication within the management software that ...