HP (Hewlett-Packard) is a server and network equipment manufacturer. This is a generic tag to be used when discussing HP hardware or software with no more specific tag available - See the list in the main tag wiki.

learn more… | top users | synonyms

3
votes
2answers
1k views

CPU/RAM upgrade for HP Proliant ML350 G5

I have an HP ML350 G5 server with a single Intel 5130 dual core Xeon installed. Is it possible to upgrade it to a dual processor system? I've looked at the quickspecs and spent a couple of hours ...
0
votes
0answers
24 views

HP 7102DL Router Invalid Command

We've bought a HP 7102DL Router, and are having some issues with it, this is not new, so has no warranty or returns. Basically, The Device was dead, guessing from previous configs or something like ...
3
votes
2answers
1k views

Install Oracle Linux 6.4 on HP ProLiant DL380e Gen8 server

installation does not detect the raid 1 logical drive created from ACU. the installation shows the two 2T disks, and after the installation is complete, I can not boot up to the system. I have been ...
1
vote
2answers
2k views

Cannot install Windows 2012 R2 on HP Blades

I have several HP ProLiant BL460c G1 blade servers where I am trying to install Windows 2012 R2. I was able to get it installed on one but can't get it installed on the rest. They all fail with the ...
5
votes
1answer
619 views

Proliant ML310e Gen8 Smart Array Predicted Failure Issue with SSD

This is a question related to this one: Third-party SSD solutions in ProLiant Gen8 servers but not covered by the question or the answers. I have an OCZ 120 gig SSD as system drive on a Proliant ...
1
vote
2answers
315 views

Check if an iLO board installed on a Windows machine

How can I check if a iLO-Board is installed on a Windowsmachine? I would like to do it via a script (python prefered). I thought about checking the connectionport. E.g.: If the iLO is connected via ...
3
votes
1answer
61 views

LFF in HP DL360p, how and is it a good idea?

I need a new server with 10 Tb storage and was looking at a DL360p with a D2600. It would do the trick, but it´s quite expensive and I´m looking for alernatives. 4 x 4 Tb would be enough, both for ...
3
votes
2answers
50 views

Determining Correct Memory For ProLiant ML115

I'm upgrading the memory on a HP ProLiant ML115 server for a client so I went out onsite today to figure out what kind of memory he needed. I figured I would make note of the model number and look up ...
1
vote
2answers
161 views

What “PAL Shim AllocRequest returning NULL” meens?

On a HP DL380e Gen8 with Dynamics Smart Array and SAS RAID installed I try to install Centos, after load the RAID Driver from HP Support Site I can access the RAID and do the installation. The ...
3
votes
1answer
299 views

Format SAS drives HP DL360G6

hoping you can point me in the right direction here. I scored an older HP DL 360G6 and have been having issues installing ESXi. After a bit of searching around a few people suggested completely ...
2
votes
4answers
456 views

Suitability of DL380p-Gen8 + D2700 for SQL 2012 Standard Edition

A question for those who know about HP server performance and SQL... I am trying to spec a suitable server that has the following requirements: Run SQL 2012 Standard Edition (I cannot get approval ...
2
votes
2answers
312 views

Detect HP ML370 G5 Bad disk in RAID0

I have one HP ML370 G5 server. Which has four 146GB SAS disks and two 300GB SAS disks that are configured as RAID 0. I have encountered a problem with one of my disks. The windows server event viewer ...
2
votes
1answer
1k views

HP ProLiant DL380 G7 servers will not POST

We have just received 2 HP DL380 G7's from our DR site. They have been running fine at the site for some time but we have tried to power them up in our DC and they will not post. We get a very brief ...
9
votes
2answers
2k views

SSD (Intel 530) read/write speed very slow with RAID 10

Explanation: We have a Server: Model: HP ProLiant DL160 G6 4 x 240GB SSD (RAID-10) 72GB DDR3 RAM 2 x L5639 HP P410 RAID Controller (256MB, V6.40, Rom version: 8.40.41.00) SSD drives are 4 brand ...
0
votes
1answer
542 views

How to connect two HP 1910-48G switches

My company have two HP 1910-48G Switches. One of them is on my flat and the other one is two flat above. I'm not a network guy but my manager wants me to connect these switches and he doesn't want to ...
1
vote
2answers
2k views

Is there a better workaround or solution to boot a Proliant DL380 Gen8 from USB DVD drive than “Restore Default System Settings”?

An HP Proliant DL380e Gen8 BIOS P73 (03/01/2013) using iLO4 suffers from USB CD/DVD drive boot issues after a reboot, as described in HP Advisory c02707749. External USB DVD drive details are: ...
0
votes
0answers
31 views

HP X1600 G2: Convert a Shared folder to a VHD?

I have an HP x1600 G2 and I seem to have made a mistake. I partitioned more than half the space available as a Shared Folder. I have now mostly filled that volume with data, approximately 2TB. I need ...
2
votes
0answers
329 views

How to increase CPU core speed of a guest to maximum of Citrix Xenserver Host

There is a Citrix XenServer 5.5 (HP ML370 G5, Xeon 2GHz) on this Server there is a Windows Guest (Windows 2008 R2 x64) under Properties I set 4 CPU Cores with max prio. But if I check with CPU-Z the ...
10
votes
3answers
1k views

Force renegotiation of PCI Express link speed? x2 card reverts to x1 width

In an effort to circumvent compatibility and cost barriers to using SSD drives with newer HP ProLiant Gen8 servers, I'm working to validate PCIe-based SSDs on the platform. I've been experimenting ...
1
vote
0answers
60 views

HP Blade based georedundant configuration / IRF

I'm planning to deploy 2 georedundant server farms. We chose HP Blade system. Every site would consist of: 1 x C3000 enclosure 4 x BL460c servers equiped additionally with 554M mezzanine (to have 4 ...
3
votes
1answer
1k views

HP ProLiant DL360 G7 Server reconfigure iLO using ipmitool

I am struggling with an HP machine that has an iLO card that for some reason has gone off the radar. I can ping the card, but that's pretty much everything I can do with it. The host is running a ...
0
votes
1answer
34 views

Server 2008 R2 TS brokering

I am using Server 2008 R2 as a terminal services broker for 5 Server 2008 R2 terminal servers. I am using the HP 5325 thin client to connect to the TS's. I have the thin-clients set to auto-login, ...
1
vote
1answer
486 views

Add two disks to existing mirrored logical drive using hpacucli

I have an ESX-server with an existing disk array which consists of 6 disks that are mirrored: Array: A Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data Logical Drive: 1 ...
0
votes
1answer
112 views

Which controller for external SAS tape drive

We're about to buy an external LTO-4 tape drive for our HP DL380g6 server, and since SCSI is on the way out, we'll buy a SAS drive, probably the HP StoreEver LTO-4 Ultrium 1760 SAS External Tape Drive ...
1
vote
0answers
226 views

HP ProLiant DL120 G7 boot stuck due to disabled raid controller

After I have enabled RAID I disabled the B110i raid controller in the BIOS. Now it is stuck on a POST message and I can't do anything. Pressing F9 to re-enter the BIOS settings does nothing. It ...
1
vote
1answer
848 views

HP ProLiant DL380 G6 server error code: 347 of array controller

I have got a brand new hp ProLiant DL380 G6 server with embedded smart array P410i controller, I got 146 GB SAS drives and wanted to change them with 300 GB SAS drives before installation. Now, we ...
2
votes
0answers
106 views

MICR check printing through Linux (EBS)

We are currently working to get a new MICR check printer (Troy Micr - HP Laserjet 600 M601) printing correctly with Oracle EBS. Our EBS installation runs on Oracle Enterprise Linux (Redhat Based). The ...
0
votes
1answer
282 views

Hard drives indication with controller MegaRAID SAS 9261-8i on HP Proliant DL320e Gen8. Is it possible?

Give me advice, please. My situation: There're the server HP ProLiant DL320e Gen8 and MegaRAID SAS 9261-8i RAID Controller. I installed Controller into server and I reconnected Mini-SAS cord from ...
1
vote
1answer
260 views

HP Procurve 2610 vlan routing

Can anyone tell me why inter vlan routing is working for all vlans except my newly created vlan 4/ I have an hp procurve 2610. Any help would be appreciated. I have basically this 1 switch with all ...
0
votes
1answer
30 views

Identify differences between HBA SR and 10GB SR card by visual inspection

I would know if exists visual differences between "8Gb FC SR HBA" and "10GbE-SR 2p PCIe Adapter" cards in order to identify them watching the cards installed in the server rear without access to the ...
0
votes
1answer
494 views

HP Procurve 2610 intervlan routing

Can anyone tell me why inter vlan routing is working for all vlans except my newly created vlan 4/ I have an hp procurve 2610. Any help would be appreciated. I have basically this 1 switch with all ...
0
votes
1answer
78 views

CPQLOFG XML “Syntax error”

HP Lights-Out Configuration Utility- CPQLOCFG v. 4.00 dated 04/04/2012 Whatever input I use, whether a sample file from the HP Web site, whether an empty file or whether a file just containing ...
13
votes
3answers
4k views

What happens when the USB key or SD card I've installed VMware ESXi on fails?

An SD (SDHC) card installed in an HP ProLiant DL380p Gen8 server running VMware ESXi just failed :( I encountered some ominous looking messages on the vCenter console and in the HP ProLiant ILO event ...
1
vote
1answer
339 views

Red Hat 5.10 fail to boot on HP DL380 G7

I'm trying to install Red Hat 5.10 x86_64 on an HP DL380 G7 server, everything goes fine and I get the successful installation message but don't know why the server fails to boot! I've done the ...
3
votes
1answer
240 views

DDR3 10600 memory running at 533mhz

I bought a second-hand HP ProLiant DL160 G6 a year ago with 48GB configured in it. I discovered checking with cpu-z and doublechecked with speccy the memory runs at only 533Mhz. I checked the ...
0
votes
0answers
117 views

HP network discovery service flooding network with SLP / SRVLOC requests

I am having trouble with "HP Network discovery service" which I think is responsible for flooding my network with SLP/SRVLOC requests. This has happened on multiple occasions on different devices ...
0
votes
1answer
193 views

HP MSR 30-10a Router - Route Traffic over Default Route

We have a brand new HP MSR 30-10a Router. We have a fairly simple routing situation - we have two IP blocks, one which has a route out. We need things on the first block to go through the router, and ...
0
votes
0answers
77 views

kernel: The lpfcdfc driver detected that no HBA ports are available

Got the following error in syslog on a hp server running redhat 6.2: kernel: The lpfcdfc driver detected that no HBA ports are available. I found nothing in the redhat knowledge base/ Customer portal ...
1
vote
3answers
478 views

How to identify faulty drive on a HP DL160 G6 - P410 Smart Array

I have a HP DL160 G6 Server with 4 HP SAS drive, firmware have been updated to the latest on the HD and the Smart Array... The issue im having is that one of the disk have a steady amber light turned ...
0
votes
2answers
418 views

HP Proliant DL320 G5 Memory Registered or Unregistered?

I have an old HP Proliant DL320 G5 with 2x 1GB of RAM. I would like to swap out the old ram and install 4x 2GB of RAM to bring it to the max capacity. The manual calls for PC2-5300 unbuffered modules. ...
1
vote
2answers
549 views

How to move RAID 1 to RAID 1+0

I have two HP disks in RAID 1 (300 Gb), and would like to at 2 additional disks in RAID 1+0 having in total of 600 Gb on C:. I would like to know is it possible to do it using Array Configuration ...
1
vote
1answer
310 views

HP ProLiant DL180 G6 SSD upgrade (sata 3)?

We've currently got a HP ProLiant DL180 G6 server with a Smart Array P410i raid card, and 8 HDDs running off it. We also just bought a new SATA Intel SSD drive to expand the server, that we're ...
1
vote
0answers
39 views

HP SUM for mezzanine cards

I'm using SUM 5.3.5, and in the HTML report I see Mezz#1, Mezz#2, Mezz#3 in the header. Further down in the "BLADE SERVERS (Quick Glance)" section I see values for the type of mezzanine card, when ...
0
votes
2answers
191 views

“Insufficient Resources” general system error when starting ESXi VM through Vsphere client

I'm trying to set up a CentOS installation on my ESXi host using VMware VSphere client, and despite my efforts, I continually receive an error. After creating the VM and attempting to start it for the ...
3
votes
1answer
123 views

RAID 5 drive upgrade

We have an HP ProLiant ML350 G5 server with an 8-bay RAID 5 array configured on a Smart Array E200i controller. The system volume and data are on the same logical drive. The drives are 72GB each and ...
0
votes
1answer
172 views

Deleting the default vlan on HP Procurve 5406 switch

I´ve tried to delete the default vlan on the switch multiple times, via CLI and using the menu options by Telnet, but it keep showing the message= "The default VLAN cannot be deleted". There are no ...
2
votes
2answers
580 views

How to find a compatible disk for HP server?

How to find a compatible disk for HP server? I own HP ML350 G6 server. I have found a spare parts list, but since there is no disk of size 300 GB 2.5 10K 6G (originally installed on server) I am ...
3
votes
2answers
341 views

How to determine HP Smart Array model?

How to determine HP Smart Array model on HP server? I own HP 350 G6 server. Really do not know where to look, is there a utility tool that can help me find this information, or is there a sign on the ...
0
votes
1answer
88 views

HP MSR20 Router VPN Questions

I have limited experience with routers, I was wondering if some offer some insight. I am considering deploying a series of HP MSR20 (or similar routers) at a number of satellite offices which have ...
2
votes
2answers
613 views

Remote discovery/inventory of attached disk enclosures

I have a handful of HP DL3xx G7 servers, that I know have HP D2600 disk units attached via P411 SmartArray controllers. I can see info about the array controllers and the disks (via the Array ...