HP (Hewlett-Packard) is a server and network equipment manufacturer. This is a generic tag to be used when discussing HP hardware or software with no more specific tag available - See the list in the main tag wiki.

learn more… | top users | synonyms

-5
votes
1answer
686 views

ESXi 5.0 - Software RAID 1 [closed]

Environment: Storage: HP P2000 MSA G3 SAS Array with 24 300GB 10k SAS Disks Two Storage Controllers with redundant SAS connections to each host Hosts: Three HP DL380 G7s with a 10GB SD Card, ...
2
votes
1answer
110 views

HP DL380 G7 - Voodoo Technology

I have a HP DL380 G7 which on boot gives the following message: HP Proliant Voodoo Technology: NDA Required - Error: Processor does not support Proliant Voodoo Technology I've searched the web high ...
0
votes
1answer
3k views

HP ProLiant ML310e Gen8 install Windows Server 2008 R2

I purchased recent an HP ProLiant ML310e Gen8 and a Windows Server 2008 designed for HP Servers and when I want to install the OS (Windows Server 2008) on My Server I receive following error: A ...
1
vote
1answer
99 views

HP Proliant BL460c Gen1 , Redhat 6.5 installation

I have been trying to install redhat 6.5 on HP Proliant BL460c Gen1, and when installation completes, it fails to boot from harddrive. It just gets stuck on "Trying to boot from harddrive (C:). Does ...
1
vote
3answers
3k views

Fibre (Fiber) Optic - Mixing SFP's and Switches

My generic question is: Can you mix switches on the opposite sides of a fibre link, or more accurately different manufactuors tranceivers. We just bought several new HP ProCurve v1810 series switches ...
3
votes
1answer
341 views

HP MSA70 / P800 Array Failure - Shows 2 drives in each slot, 13/25 drives “missing”

We have an HP MSA70 with 25 x 600GB HP SAS 10k DP drives, connected to an HP P800 controller. The drives are configured in RAID 6. Yesterday, some kind of unknown "event" occurred and the array ...
3
votes
1answer
109 views

Is there an automated way to report and open cases with HP for drive failure?

I want to take failed drives, send a diagnostic report to HP so I can automatically have the drives shipped to the right location. I'm considering writing C# code to automatically log in, post a case ...
0
votes
1answer
491 views

How to configure Array on DL360 GEN 8 Server Running Ubuntu

Hi all I have an DL360 GEN 8 Machine. And I need to install ubuntu server on it. However. Accourding to HP, THE Dyanamic Smart Array System is not support. Since I would love to make use of array.. ...
5
votes
3answers
2k views

Extend RAID 1 (HP SmartArray P410i) running Linux

I took over a fairly simple server setup with the following RAID 1 config running Ubuntu 11.10 (Kernel 3.0.0-12-server x86_64): => ctrl all show config Smart Array P410i in Slot 0 (Embedded) (...
0
votes
1answer
73 views

HP Blade G6 - Replace original disks with bigger ones

The 2 x 150GB harddrives in RAID1 in the actual HP Blade G6 460c are running out of space. I run MS2008R2 and RDP Sessio Host. I have nought 2 x 450GB drives to use instead. Instead of reinstalling ...
1
vote
1answer
184 views

Hp Proliant ml310 gen8 v2 server is not recognizing western digital disks [closed]

just adquired a Hp server Proliant ML310 gen8 v2 where I work, also we adquired two brand new Westerrn Digital Discs (P/N WD500AVVS-63ZWB0) and I tried all sata configurations, and when I try to ...
1
vote
4answers
3k views

HP Smart Array P400/256MB SAS Controller BATTERY

This is probably a dumb question. I recently purchased a couple of refurbished HP SB40C storage blade for our HP Bladesystem c3000 enclosure. Each comes with an HP Smart Array P400/256MB SAS ...
5
votes
1answer
300 views

Possible to use Powershell to detect if an HP server has a bad drive?

I'm trying to use Powershell to detect certain hardware failures. Can Powershell hook into normal HP events/logs/alerts to detect if a drive failed?
1
vote
0answers
892 views

HP ProCurve 4208vl - Show PSU information?

I'm working with a few older HP ProCurve 4200-series chassis switches (4204vl and 4208vl). Some of these units have single power supplies, while others have dual power supplies. I'm trying to ...
1
vote
1answer
1k views

Debian Wheezy drivers for HP ProLiant DL360 Gen9 RAID controller

good morning everyone! I bought 2 HP DL360 Gen9 Servers and wanted install Debian Wheezy on those with PXE Boot network install. But it seems that Wheezy does not include a driver for the Smart Array ...
0
votes
0answers
85 views

Create a vNIC w/o VLAN ID using HP NCU

On a physical server hardware System x3550 M3 with NIC teaming configured, is that possible to create a vNIC without VLAN ID assigning to it in HP Network Configuration Utility? Perhaps, this can be ...
0
votes
1answer
125 views

IRF HP 6125G Blade Switch : determine MAC address of each member

I have a little problem with my HP 6125G Blade Switch. Just to precise, I don't understand much IRF configuration. So i have a hp C7000 blade systems, with embeded blade switches (4). The switches ...
2
votes
2answers
5k views

Why isn't my RAID array rebuilding?

Got a notice last night that a drive failed on a server. Got in this morning to replace it, and we're getting the following. Controller config report for the array looks fine, with the unusual status ...
1
vote
1answer
421 views

Configure more than two logical drives in an HP ProLiant Gen8 server?

I've a server HP Proliant dl380 gen 8. I've got 2 RAID 1 drives (each having 2 HDDs (300gb) in a mirror). I've now come to put 4 extra physical disks into the server and it won't let me create the ...
2
votes
2answers
4k views

How to find which HD controller module a running Linux system is using?

I have a problem with an HP ProLiant Microserver that won't boot with a Slackware 12 system using Linux 2.6.21.5 If I boot a recent version of System Rescue CD, the disk is recognized. So my ...
-2
votes
1answer
122 views

non-enterprise SSDs on HP servers [duplicate]

I'm a beginner with configuration of server computers. my company wants to upgrade one of the servers with SSD storage. the server is HP DL380 G8. the hardware seller company which my company works ...
0
votes
1answer
614 views

HP ProLiant Shared ILO port do not answer to host

I have a HP-proliant dl160 gen 9 with an iLO 4 configured with a Shared Network Port - LOM on port 1, the port is see as eth0 by Red Hat Enterprise linux 6.5 and used as a bridged port. The port is ...
2
votes
0answers
248 views

MICR check printing through Linux (EBS)

We are currently working to get a new MICR check printer (Troy Micr - HP Laserjet 600 M601) printing correctly with Oracle EBS. Our EBS installation runs on Oracle Enterprise Linux (Redhat Based). The ...
19
votes
9answers
96k views

What printer driver should I use? [closed]

I am nstalling drivers for a printer, and I have a choice of either PCL (5 or 6), or PostScript drivers? Which one would you recommend and why? The printer is HP LaserJet 2605dn, the OS is Windows 7 (...
1
vote
1answer
116 views

How to connect HP MSA2324sa to server?

I'm having issues with an HP MSA2324sa array. I connected it to the server and the server does see it however, I am not getting a /dev/s* device even though I have properly mapped the host from the ...
2
votes
2answers
4k views

CentOS 6.5 not booting after installation on Hp ML310e Gen8

I have experience with Installation and configuration of Windows Server system. I am trying to install CentOS 6.5 on the above mentioned HP box and the installation process goes on without a hitch. ...
0
votes
0answers
22 views

HP Compaq 8200 Elite SFF won't boot from USB drive. Solution [duplicate]

Can't get an HP 8200 Elite Small Form Factor to boot from USB. (MP8200 Elite SFF PC) BIOS version: J01 v02.15 ME Firmware version 7.1.3.1053 Tried on two different computers, with same BIOS version ...
1
vote
0answers
87 views

HP MSL2024 not auto changing tapes using Ultrabac 9.2.2

I am using Ultrabac 9.2.2 to run backup sets to a one drive HP MSL2024 tape library. It's currently connected via SAS 3Gbs to a HP Proliant DL380G6 running Server 2008 R2. I have the drivers from HP ...
1
vote
1answer
267 views

ALL drives on MSA60 have blue UID LED lit

We have a pair of MSA60's connected to two different servers. Today I ran a diagnostic report via the HP Array Configuration utility in order to obtain the serial numbers of the devices. Now that ...
1
vote
0answers
53 views

HP Microserver AMD Raid controller

I have a HP N54L Microserver which i have been using successfully with Windows Server 2012. I only have the one hard drive in but want to add another in RAID 1 and then another two much larger drives ...
0
votes
2answers
156 views

What is the maximum ProLiant DL580 G3 SCSI or SAS drive capacity, and are only HP drives permitted?

I was recently given a free HP ProLiant DL580 G3 configured for SCSI drives from out of a datacenter. I understand that this is an older unit, and reliability may be questionable at best, but in my ...
0
votes
1answer
262 views

HDD LEDs stopped working after exchanged raid controller in HP DL380 G5

I recently went ahead and exchanged the p400 RAID controller in my HP DL380 G5 server with an LSI HBA card (SAS 9207-8i). I did this to get better disk compatibility, and I didn't need RAID ...
0
votes
0answers
78 views

Install SLES11 sp3 on HP BL460c Gen9 server with 650 FLB controller

I am trying to install SLES11 sp3 on HP BL460c Gen9 server with 650 FLB controller connected to a SAN over iSCSI, I need to install SLES on the remote SAN On the Disk Activation page while ...
0
votes
2answers
1k views

1611- Fan x missing, Fan Solution Not Sufficient in HP ProLiant DL380 G6

I have HP ProLiant DL380 G6 server. It is showing following errors. 1611- Fan 1 missing, 1611- Fan 2 missing, 1611- Fan 3 missing, 1611- Fan 4 missing, Fan Solution Not Sufficient, 1615- Power ...
4
votes
2answers
206 views

Identify which drives belong to a specific HP RAID 5 Group

A total of 32 drives were removed from x4 decommissioned HP DL380 G6 servers (eight per server). The setup of the eight drives per host was into two RAID Groups: RAID 1 = SLOT 1, 2 = ESXi OS RAID 5 = ...
0
votes
1answer
203 views

Does Erase Utility for HP Intelligent Provisioning delete also itself

After using Erase Utility (HDD and AHS chosen, not RBSU) from HP Intelligent Provisioning in a HP Gen8 blade, I couldn't start the Intelligent Provisioning itself pressing F10 after POST. Does the ...
0
votes
2answers
254 views

HP EliteDesk workstations Intel AMT event log “Operating system lockup or power interrupt.” errors

We have a number of HP EliteDesk workstations of varying models (8300, 800 G1) in our organization, some of which started exhibiting strange behavior over the past few months. Checking the Intel AMT ...
-4
votes
1answer
70 views

what is the plug-in for Firefox in order to access the HP blade center [closed]

I work with HP_blade center machine , Type - C7000 Enclosure G3 In the HP blade center I have couple of HW machines with Linux red-hat OS I have successfully access to the HP integrated management ...
3
votes
2answers
3k views

installing non-hp RAM in hp proliant ml310e G8

i bought the hp proliant ml310e G8 with 8GB of crucial RAM. but when i plug it in the system initialization hangs on 90%. i read in another post (HP ProLiant ML310e Gen8 early system initialization ...
-1
votes
2answers
4k views

How to replace SCSI with SATA or adapt SCSI to SATA drives

At first, I apologize for my question, but I am complete beginner. My friend gave me an old HP Proliant DL385 server which was replaced in bank, where he works, by newer stuff. Because of privacy, ...
2
votes
1answer
155 views

A large number of JetDirect firmware updates - what issues do they address?

HP recently released a large number of firmware updates for JetDirect devices. There is no changelog provided. Curiously, many obsolete (e.g., 802.11b) devices are in the list, and the last time a ...
0
votes
1answer
204 views

HP Data Protector restore destination not honored?

I have HP Data Protector 5.5 installation backing up a single server. Now we have experienced RAID troubles on the server and I would like to restore the backup to antoher server before commencing any ...
0
votes
1answer
87 views

What is the proper way to create a vlan?

My goal is to create a separate VLAN, that will be isolated from the rest of the office, I just want them to have internet. Normal pc stations x1 HP Procurve switch V1910 x1 cisco asa 5512-x What I'...
2
votes
1answer
844 views

HP Proliant DL380 G3 not booting. Error “1611 fan 7 not present” after changing power supply

I inherited an HP proliant DL380 G3 some years back and it's been working faithfully as a games/web/build server. At some point during the past year where I haven't been using it the power supply ...
0
votes
2answers
207 views

Detection of consumer SSDs by enterprise disk controller in non-RAID configuration [closed]

We (a client) are considering [insisting on] using consumer grade SSDs (to keep the cost down) in some Dell R710 and HP Proliant D380 G5 servers. I've looked about and people report the P400 cards ...
2
votes
2answers
387 views

How to find an HP desktop/workstation with PCIe power and room for double-high card

I am searching for an HP desktop or workstation with an Intel i5 or i7 processor that would support a "large" graphics card like an ATI Radeon 6850, which has two PCIe power inlets and which takes up ...
1
vote
1answer
227 views

What authentication protocols are negotiated by HP Printers to Windows Server Shares?

I am trying to find information specifying the protocol negotiation process for newer HP printers that can perform direct scans to Windows-style shared folders - in particular, the HP 8600-series is ...
3
votes
2answers
2k views

HP microserver gen8 - Win server 2012 r2 does not see the internal HD - asks for a driver

I have just taken delivery of the base spec Microserver gen8. I have installed a WD 1Tb drive in slot 1, and the BIOS/RAID controller finds it. However when I come to install Win server 2012 r2 it ...
1
vote
0answers
109 views

Spanning Tree Protocol on HP5406zl and Netgear edge switches

I have a simple star network setup, a core HP switch with servers and storage, and WAN uplinks on it, and then trunked 2 x 1GB uplinks to some crappy old Netgear switches (I know, but moving on). We ...
18
votes
4answers
21k views

What happens when the USB key or SD card I've installed VMware ESXi on fails?

An SD (SDHC) card installed in an HP ProLiant DL380p Gen8 server running VMware ESXi just failed :( I encountered some ominous looking messages on the vCenter console and in the HP ProLiant ILO event ...