HP (Hewlett-Packard) is a server and network equipment manufacturer. This is a generic tag to be used when discussing HP hardware or software with no more specific tag available - See the list in the main tag wiki.

learn more… | top users | synonyms

0
votes
0answers
20 views

Low TCP down speed on network interface

We have HP Proliant ML370 G6 server with 4 gigabit ports on it. 3 ports work well, but 1 (LAN1) cuts TCP Down traffic. TCP Up and UDP is ok. Here is the speed test result. Here is the windows monitor ...
2
votes
2answers
1k views

Get port vlan tag via snmp on HP Procurve

I'm trying to write a nagios check that will check if a port is a member of (tagged in) a perticular VLAN. I've discovered the following SNMP location SNMPv2-SMI::mib-2.17.7.1.4.5.1.1.40 for checking ...
1
vote
2answers
549 views

Governing fan speed in Linux

We bought an HP ProLiant DL320e Gen8 v2 server at office, to be used to run internal applications under Linux. Our OS choice runs between CentOS 6.5 and openSUSE 13.1, though the server is certified ...
0
votes
1answer
12 views

Private VLAN on single port

I am trying to separate a group of computers (5 to be exact) from an entire network, but they still need to login from ad dc. Those computers are on a different floor, they have static IPs, and they ...
2
votes
2answers
3k views

HP ProLiant Shared ILO port disadvantages?

The last few generations of HP ProLiant systems have featured an option to share the ILO functionality with the first network interface. I'm in a situation where per-port costs on the switch I'm using ...
-2
votes
1answer
30 views

Hp Proliant DL380 G4 Power on without Backplane [on hold]

I got an HP ProLiant DL380 G4 for free and want to use it with SATA HDDs as described here: http://serverfault.com/a/516949/290693 But how can i power up the server without the SCSI backplane, because ...
6
votes
2answers
3k views

HP ProLiant DL380 G4 SATA support?

I'm planning to get a second hand HP Proliant DL380 G4 and setup it as storage server, probably using NexentaStor and setup a ZFS system. But now I wonder does DL380 G4 can be convert or support SATA ...
2
votes
2answers
5k views

HP Dynamic Smart Array B120i ESXi performance issue

One of our small offices was in need of a small server to perform certain tasks. Because the noise and size an of a regular server i went with the HP ProLiant Microserver Gen8 G1610T. Witch i expected ...
2
votes
1answer
74 views

HP microserver gen8 - Win server 2012 r2 does not see the internal HD - asks for a driver

I have just taken delivery of the base spec Microserver gen8. I have installed a WD 1Tb drive in slot 1, and the BIOS/RAID controller finds it. However when I come to install Win server 2012 r2 it ...
0
votes
2answers
36 views

What are the procedures for upgrading a ProLiant ML370 G5 firmware REMOTELY? I'm thinking via its iLO, and if so, where do I access to do the upgrade

What are the procedures for upgrading a ProLiant ML370 G5 firmware REMOTELY? I'm thinking via its iLO, and if so, where do I access to do the upgrade. Firmware files are already on the server's C: ...
1
vote
2answers
57 views

X5690 compatibility + HP DL360 G6

Does anybody know if the X5690 is compatible with the HP Proliant DL 360 G6? I got a pair of X5690s and a DL 360 G6 but i am unable to get any video signal. The fans spin up like crazy and that is ...
0
votes
2answers
1k views

Problems with DL380 Gen9 Smart Array

I recently bought a ProLiant DL380 Gen9, i've had some trouble getting it up and running...I ran the ProLiant SPP ISO to uprade firmwares but felt the system became less stable as a result, at one ...
0
votes
1answer
55 views

Multiple DSLs connected to single HP server

networking noob here! Got a pretty specific question. Is it possible to plug 10 cat5 (network) cables that come from 10 different DSL modems to an HP server so I have 10 different broadband lines ...
6
votes
1answer
565 views

Identifying what caused a server reboot

I have an HP ProLiant DL380p Gen8 that is running VMWare ESXi 5.5. It has been rebooting itself at seemingly random intervals for the past 24 hours. There is only a single VM running, and even if I ...
0
votes
2answers
1k views

ESXi local storage recommendation

We are going to buy HP Proliant Server DL380p Gen8, and we want to run vmware esxi 5.1. but I have problem with choosing the correct storage with the lack of budget. we have choice to buy 4x2TB SATA ...
0
votes
1answer
59 views

HP ProLiant DL360 G6 won't boot

I have an hp proliant DL360 G6 server that was 1 year stopped.. I turned it on last week and it was working just fine. So i left it working during the weekend. On Monday when i returned i notice ...
1
vote
2answers
1k views

Uncorrectable Machine Check Exception on HP DL360 G7

i have about every hour in IML (hplog) from HP DL360 G7 record: CRITICAL: CPU - Uncorrectable Machine Check Exception (Board 0, Processor 1, APIC ID 0x00000003, Bank 0x00000005, Status ...
1
vote
2answers
1k views

Unable to connect to iLO2 Remote-Console be it either IE ActiveX or JVM

I have HP Proliant G5 series with license for iLO2. The server is running CentOS. Telnet ports are opened and I can successfully connect via certain port, that i've set up in iLO2 setting to use for ...
11
votes
3answers
961 views

Copy Linux host to new hardware

I need to do host to host migrations from old hardware to new hardware. Specifically, from HP BL460G7 to HP BL460G8. Both the old and new servers have 2 x 600GB 2.5" drives and are configured for ...
2
votes
1answer
27 views

HP DL180 G6 - Are 6G/s speeds obtainable?

I have a DL180 G6 server with 12x 2Tb 6G/s SAS drives. I was only getting 3G/s reported. I then went and purchased a P410 controller with 512 Meg cache and battery. I loaded up the drives with Server ...
1
vote
1answer
740 views

HP ProLiant DL180 G6 SSD upgrade (sata 3)?

We've currently got a HP ProLiant DL180 G6 server with a Smart Array P410i raid card, and 8 HDDs running off it. We also just bought a new SATA Intel SSD drive to expand the server, that we're ...
8
votes
2answers
14k views

Controlling HP ProLiant DL380 G6/G7 fan speed

I'm having fan speeds and noise level issues from my most recent batch of HP ProLiant DL380 G7 servers. Most of the systems are nearly silent with low fan speeds (as reported by hplog -f). The ...
0
votes
2answers
977 views

HP Proliant DL320 G5 Memory Registered or Unregistered?

I have an old HP Proliant DL320 G5 with 2x 1GB of RAM. I would like to swap out the old ram and install 4x 2GB of RAM to bring it to the max capacity. The manual calls for PC2-5300 unbuffered modules. ...
2
votes
1answer
60 views

HP Proliant DL380 G5 won't power on

I am trying to repurpose one of our DL 380 G5 servers. Originally we had two of these, put into production the same day and purchased from the same PO, that had their VGA ports go bad on their system ...
5
votes
3answers
1k views

Extend RAID 1 (HP SmartArray P410i) running Linux

I took over a fairly simple server setup with the following RAID 1 config running Ubuntu 11.10 (Kernel 3.0.0-12-server x86_64): => ctrl all show config Smart Array P410i in Slot 0 (Embedded) ...
3
votes
2answers
1k views

VMWare ESXi error upon boot “Relocating modules and starting up the kernel”

Coming back from a 4-day weekend, I noticed the A/C had been turned off for the duration of the long weekend and the heat was around 80-82 degrees. The HP ProLiant DL185G5 was running but the system ...
2
votes
1answer
42 views

Unbalanced server memory configuration concern [closed]

A request for a server (HP DL 160 Gen9) with 2 processors came through with a weird RAM configuration request today. They requested 2 8GB DIMMs and 1 16GB DIMM. Are there any numbers out there which ...
7
votes
3answers
6k views

VMware - persistent “Host memory status” alarm in vSphere

I have a particular VMWare ESX 4.1 host that has a very persistent "Host memory status" alarm. This is running on an HP ProLiant DL360 G7 server. The HP ILO and System Management agents don't know ...
0
votes
2answers
35 views

Raid 6 with HP P421?

I cant figure out if I need to buy a licens key to enable Raid 6 for this raid controller? I can't find where to buy one and I find pages where it says that its now free. sudo hpssacli ctrl slot=1 ...
2
votes
1answer
69 views

ESXi very slow with WD reds

I have a small company and we offer tech support to small companies. I've been using the HP Gen8 MicroServer in most of them as a replacement of homebuilt computers for some time. Sometimes customers ...
4
votes
2answers
217 views

Extended raid 5 is not expanding

I have a D2700 with 25 1Tb disks with a P421 raid card in a dl360p gen8 HP server. It was raided as two raid 5 with 2 spare each. I decided to make one raid 5 out of them, deleted one raid and added ...
13
votes
2answers
12k views

Third-party SSD solutions in ProLiant Gen8 servers

I was wondering if anyone had any specific experience using Intel DC3700 SSDs (or similar) in the HP (DL380p) Gen8 servers? I'm upgrading a set of database servers that use direct-attached storage. ...
2
votes
7answers
14k views

automatic get server temperature via HP iLO

I have a couple of HP servers in 2 offices. They have iLO interfaces and i can read the temperature from there. How can i read this temperature automaticaly over the network ? does iLO have any sort ...
0
votes
0answers
19 views

Intel Rapid Storage Technology install failure [migrated]

When I try to install IRST, it runs for a bit and then a popup appears saying that setup.exe had a problem. Expanding the details produces this: Problem signature: Problem Event Name: ...
0
votes
2answers
228 views

Replacing HP P410 with P420 and keeping the data

Would it be possible to replace HP P410 raid card with a HP P420 raid card while keeping the data? I've replaced P410 with P410 without any issues obviously. I believe they use the same software, so ...
0
votes
0answers
12 views

HP P4014n will only print letter size

Had a user using HP P4014n locally, device suddenly stopped printing, I removed the printer, and uninstalled and reinstalled the printer drivers. Then readded printer. Now it will not auto-detect ...
0
votes
1answer
63 views

Can I Use a Normal SSD disk in HP DL380 G6

We have a bunch of DL-380 G6 servers in our company, I want to know whether it is possible to use 2.5" SSD hard drives (with SATA III interface) on these servers or not?
0
votes
1answer
212 views

Default gateway config in FlexFabric 5700

We've taken delivery of a brand new set of shiny FlexFabric 5700 10GbE switches. I've read through the config and setup guides provided by HP and they're great, except that they outright lie about ...
1
vote
1answer
1k views

Add two disks to existing mirrored logical drive using hpacucli

I have an ESX-server with an existing disk array which consists of 6 disks that are mirrored: Array: A Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data Logical Drive: 1 ...
1
vote
0answers
13 views

Switching to HP microserver [duplicate]

I wonder if anybody have experience with migrating to the latest Gen8 HP microserver from existing architectures. http://www.storagereview.com/hp_proliant_microserver_gen8_review In my case the ...
0
votes
1answer
945 views

Getting invalid input error on procurve 2510 when setting up ip helper-address

I have 3 HP Procurve 2510G-48 and I want to setup a VLAN for public wifi (VLAN100). Originally I just had the default vlan1. I have computers communicating across switches on VLAN100 with static IP ...
3
votes
1answer
250 views

Consumer HDDs in a HP ProLiant DL180 G6?

Model: HP ProLiant DL180 507168-B21 Will a ProLiant DL180 G6 work with a single 1TB consumer hard drive in a caddy? Yes, I know I should use enterprise HDDs but we have a limited budget, and this ...
1
vote
2answers
52 views

HP c3000 chassis to HP c7000 chassis swap

All, we currently have an HP c3000 chassis with 8 blade servers, two GbE2c Layer2/3 Ethernet Interconnects and two 3gb SAS Switch Interconnects. The Ethernet interconnects are our uplinks/trunks to ...
1
vote
3answers
62 views

Need the “msacli.exe” file for monitoring P2000 SAN. IOPS values needed

Hi i need some performance stats from our MSA p2000 SAN. The Problem is that i want to have the values i get when i connect via SSH and use the command "show vdisk-statistics". This command shows me ...
4
votes
2answers
138 views

Wrong firmware on Ultrium LTO4 1840

A client has an old MSL6030 Tape Library with a pair of LTO4 Ultrium 1840 tape drives in the back. Both have failed. We have procured identical replacements (same part # anyway) and have been unable ...
3
votes
3answers
2k views

What to do with a HP Itanium box?

One of my customers has a HP Itanium (Integrity Rx6600 I think) box. They want to use it for a running our apps (Linux based). I was initially hoping to put a ESXi on it and load Ubu 10.10 but I was ...
1
vote
2answers
46 views

Which print driver do I deploy? What is a print driver capable of?

My organization recently purchased a HP DesignJet T3500 printer with the HP Designjet PostScript/PDF Upgrade Kit. HP offers 3 specific drivers in 2 packages. Which driver do I use? When I run the Add ...
1
vote
1answer
606 views

HP P410 “Parity Initialization Status: Initialization Failed” How to fix?

I'm using HP P410 raid card with BBU with 12 x 3TB drives on RAID50 After a power outage at the datacenter, the hpacucli shows this: Parity Initialization Status: Initialization Failed However, all ...
1
vote
1answer
384 views

MSA30 Linux CLI Configuration?

Can some one help me shed some light on this please? I have a MSA30 hooked up to a HP Proliant DL380 G4 running SuSE SLES Linux. My question is how do I configure the hard drives connected to be in a ...
0
votes
1answer
318 views

DL360 G2 SNMP drive failure location

I've got this service call with the snmp information provided below, about the drive failing in HP DL360 G2 server: Error log Event Type: Error Event Source: Storage Agents Event Category: Events ...