Tagged Questions

The tag has no wiki summary.

learn more… | top users | synonyms (1)

0
votes
1answer
19 views

How to activate updated drivers in Hyper-V

I am working on getting a host setup using Hyper-V Server 2008 R2 but am running into some issues with drivers. I have been able to add the drivers via pnputil. When I check to which which drivers ...
1
vote
2answers
26 views

Restarting my HyperV Host

A real quick question! I have a physical VHOST which hosts several VM's for different purposes - they are all set to automatically load when my VHOST first boots at staggered times. Now if I apply ...
0
votes
0answers
47 views

Can't ping or access Hyper-V Server R2

I have installed Hyper-V Server R2 on a brand new HP Proliant DL180 G6, From the server I can ping the others computers on my local network. When I try to ping the server from any computer on the ...
1
vote
2answers
110 views

Linux Integration Services no longer function after a kernel upgrade on Hyper-V

I've been running CentOS 6.2 as a VM under Hyper-V on my Windows Server 2008 R2 system. If I run "uname -r" it shows my current Linux version as "2.6.32-220.4.1.el6.x86_64" A while ago, I did a ...
0
votes
1answer
54 views

Hyper-V Export VM

I have Hyper-V VM that I exported off of a server a few days ago. Right now it's running on a temp server as I rebuilt the original host server. Now that I have the host server all ready to go I am ...
0
votes
1answer
143 views

Install Windows Server 2008 Core on a Dell Optiplex 790

Does anybody have experience installing Windows Server 2008 Core on a Dell Optiplex 790? When I connect to the machine with the Hyper-V Manager Administrator snap-in, and try to create and run a ...
1
vote
3answers
94 views

Does Hyper-V support GPT disks on the host?

Are there any issues with Hyper-V (on Server 2008 r2) if the host is formatted as GPT? Someone out there has tried this...
1
vote
2answers
76 views

Windows based development environment: HyperV, VMWare, or VirtualBox on development machine? [closed]

I am a software engineer with a little bit of an informal "support" functionality... I am trying to figure out what is the best possible approach to employing virtualization technologies into our ...
1
vote
1answer
73 views

Remotely Shut down Hyper V server from Bat file (UPS shutdown)

I have set up an APC UPS on our 2003 Small Business Server with an APC SmartUPS connected to it via the USB port. I have set up PowerChute on the server with the following settings: After 1 minute ...
7
votes
2answers
325 views

NIC Teaming with Broadcom on HyperV 2008 R2

I have a HyperV cluster made up of 3 hosts. Each host is connected to both of my Nexus 5548 switches running in an etherchannel. LACP on the switch and NIC teaming using Broadcom 802.3ad on the server ...
2
votes
1answer
64 views

Server 2008R2 cluster for hyper-v - start with a single server?

I'm planning a Hyper-V virtualization system what will include: 2 very nice dual 16 core servers Dell MD3600f fibre channel SAN It will be running about 10 virtual machines. The plan is to setup ...
1
vote
0answers
75 views

Automating first time login process in Windows Server 2008 R2 SP1 virtual machine

I have a set of Windows 2008 Server R2 SP1 Enterprise Edition virtual machines running in Hyper-V. The host server has 64GB of RAM and two SSD drives (one drive for the host OS, and the second one for ...
0
votes
1answer
96 views

Elastix 2.2 clock not keeping correct time

I'm configuring our Elastix 2.2 server and the clock was not in sync. When I check the machine in Linux this is what it says. I've tried to search for a resolution but came up empty. This is ...
0
votes
2answers
110 views

Hyper-V is there a webinterface to start/shutdown the VMs?

I´m using a Windows Server 2008 R2 with Hyper-V. Now I´m searching for a way for a normal user to control the VMs on this server. Is it possible to use a webinterface to start and shutdown the VMs? ...
1
vote
2answers
70 views

Windows Server 2008 Hyper-V Server: Guest Windows Server machine imported - only see blinking underscore

I exported 2 virtual PCs from Hyper-V. and then imported them. I can't start one virtual machine that has Windows Server 2008 R2 installed. The machine starts, but then I only see a blinking ...
1
vote
1answer
56 views

SCVMM 2008 R2 Powershell Commands

I am running SCVMM 2008 R2 with 3 hosts. Right now I am patching the hosts, so I am running the command disable-vmhost hostA -MoveWithinCluster Is there a command that I can run or switch I can ...
1
vote
1answer
137 views

What are the possible reasons why Hyper-V can't compact a VHD?

I am hosting several virtual machines on a host running Hyper-V Server 2008 R2. The disks were originally provisioned on a different server (2008, not R2) about 16 months ago, and were migrated onto ...
1
vote
3answers
54 views

Where to enter an IP address on a newly created Hyper-V machine after connected to a network adapter

Where to enter static IP address on a Hyper-V machine. I have created a new VM on a hyper-v host, connected to a network adapter, have an IP address available to assign to it, but don't know where to ...
-1
votes
1answer
85 views

Using bridge connection to get ip access from guest in Hyper V

I want to access the internet on a dedicated second public ip from the guest. I have created an internal only network in Hyper-V Manager. The virtual network is in a bridged connection to the ...
-1
votes
1answer
203 views

Assign public IP address to Hyper-V guest [closed]

Possible Duplicate: Using bridge connection to get ip access from guest in Hyper V I have now been trying for nearly 4 days to setup what i would think is the simplest hyperV env. I have a ...
0
votes
2answers
176 views

Can one make Hyper-V's virtual networking ignore VLAN tagging?

Is there any way to make Hyper-V's (Hyper-V Server 2008 R2 SP1) networking subsystem ignore VLAN tagging and just accept all packets that the physical NIC accepts? ...hopefully by actually ignoring ...
0
votes
1answer
228 views

Hyper-V guest suddenly extremely slow

I have a setup with a Windows 2008 R2 Hyper-V Server and a couple of guests. Yesterday I noticed that one of the guests had become very slow (e.g. noticable lag when browsing through folders). I ...
0
votes
1answer
70 views

Hyper-V Guest Connectivity Problems

I have one particular Hyper-V guest, one of 5 on this particular Hyper-V host, that can't seem to make any outgoing network connections. The guest is running Windows Server 2008 R2 SP1 and uses IIS ...
0
votes
1answer
48 views

Raid group on a p2000g3 iscsi

I have to set up an hypervR2 cluster (2nodes) and a san storage (hp p2000g3 iscsi) with 12 disks (300 GO, 10k SAS) The p2000 has 2 controllers. What is the best ? ONe big raid group (raid10) with the ...
0
votes
1answer
300 views

Hyper-V virtual machine unable to get IP address from DHCP server running on same physical box

We have a Windows server 2008 R2 with two network cards running AD, DHCP, DNS and Hyper-V The first nic is setup with a static IP address and DHCP, WDS, and DNS are bound to it. The second nic is ...
3
votes
1answer
39 views

Can I temporarily leave other roles active when converting a 2008 R2 server to a hyper-v host?

I currently have a Windows 2008 R2 box that I want to convert to a hyper-v host. Currently I have the following running on it: File Services, Web Server (IIS), and Sql Server 2008 R2 with a few ...
1
vote
1answer
373 views

How does “Hyper-V won't boot off SCSI Disks” affect me? (all HDDs in server are SCSI)

A few months ago we purchased a Dell server with the intent to eventually start rolling out VMWare. Now we are exploring Hyper-V as an option instead, however I've seen a requirement for an IDE drive ...
2
votes
1answer
139 views

iSCSI volume for hyper-v

I am moving several hyper-v VMs from an under-powered host to a newer host with an iSCSI array for storage. What is the best configuration for the iSCSI volume to get the best performance for hyper-v? ...
3
votes
3answers
856 views

Hour-long shutdown duration “shutting down hyper-v virtual machine management service”

I have a Windows 2008 R2 server that is a Hyper-V host (Dell PowerEdge T300). Today for the first time I encountered an odd situation; i lost connection with one of the guest machines but logging on ...
1
vote
2answers
217 views

Disk Latency High on Hyper V (20ms to 100ms for avg. disk write)

I am running Hyper V on a 12 GB, i7 Sever with 5 VMs running. I had the impression that the VMs operate quite slowly but the memory consumption and cpu utilization are not worth mentioning so I ...
1
vote
1answer
82 views

Managing Hyper-V in a domain with RPC errors

I've got an awkward setup here. I've got a domain controller (2008 R2 STD) in the United States, and a Hyper-V 2008 R2 server (Raw Hyper-V server) and a Windows 7 workstation, all connected to a ...
-4
votes
1answer
201 views

Dell PowerEdge t710 raid configuration for newbie

My company bought a Dell PowerEdge t710 server with: 48 GB ram 4x4 GB ethernet ports. RAID 5 for PERC H700 4 x 1TB, SATA, 3.5-in, 7.2K RPM Hard Drive (Hot Plug) My job is to configure Hyper-V ...
1
vote
2answers
114 views

Hyper-V machines refusing to start after BIOS upgrade

I have a Windows 2008 Server with Hyper-V installed, and a couple of VMs. All was working properly until I tried upgrading BIOS. All of a sudden I get permission denied when attempting to start any ...
2
votes
1answer
117 views

Is there a way to capture a Hyper-V VHD image of a running Linux (Centos) server?

I have a linux server running Centos (actually its a PBX running Trixbox) that I want to migrate to a Hyper-V based VM so that the physical server can be repurposed. Is it possible to capture a VHD ...
2
votes
2answers
72 views

Manage Hyper-V Server 2008 R2 from same machine

Is there a way to manage Windows Hyper-V Server 2008 R2 from within itself? E.g. not remotely. I'd like to be able to manage VMs as well as connect to and work with a a VM in full screen mode. This ...
0
votes
0answers
132 views

VPN in MS Hyper-V Server 2008 R2?

I am trying to connect a MS Hyper-V Server 2008 R2 machine (the OS with just a command prompt and settings panel) to a VPN Network and I can't get round to it. I have tried using Rasdial but the ...
2
votes
1answer
495 views

Hyper-V Live Migration Fails

I have a failover cluster consisting of two nodes: VS1 and VS2. Each node is running Windows Server 2008 Datacenter R2 SP1. They have slightly different processors (E5335 and E5420), so I'm running ...
3
votes
1answer
224 views

How to export a virtual machine in Hyper-V?

i am trying to export a virtual machine in Hyper-V. i click Export, i select a location: and click Export, and nothing happens: How do you export a virtual machine in Windows Server 2008 R2 ...
1
vote
1answer
99 views

What is causing the huge network traffic?

I have a virtual machine hosted by Hyper-V, in a physical server provided by Hetzner. The physical server has Windows 2008 R2 Server, and the virual machine has Windows 7 Pro 32-bit. The virtual ...
2
votes
1answer
798 views

Why is RPC connectivity broken for the Hyper-V Manager?

I have a Hyper-V Server 2008R2 (Core) with numerous VMs running. This Hyper-V server is a member of a domain. Since the server has nothing running on it apart from the Hyper-V service, the only way ...
0
votes
2answers
348 views

Hyper-V Core: Dedicate SSD for pagefiles

I want to move pagefile.sys from C: -HDD- to S: -SSD- on Hyper-V Core. I just upgraded RAM from 8GB to 16GB. 8GB was pretty enough. I also want to move guest OSes' pagefiles to SSD as .VHD format. ...
1
vote
3answers
197 views

How do I ensure that a member server DNS client (dnscache) is not initialized until its hyper-v domain controller has started?

I have a laptop configured in the following manner: Laptop is Server 2008 R2 member server running Hyper-V connected to the internet via a Wireless adapter One virtual machine is a Server Core 2008 ...
5
votes
1answer
175 views

Hyper-V spontaneously pauses all VMs

I just had an odd thing happen with a Hyper-V server that has 4 guest VMS running on it. The host server and all guests are Server 2008 R2 SP1. I logged into one of the guest VMs using Remote Desktop ...
0
votes
2answers
308 views

Dropped network connections to hyper-v server and guests on local network

I have recently installed at home a new Windows Server 2008 R2 SP1 to be used primarily as a hyper-v host for several home servers. I'm having some interesting networking issues that I suspect are ...
1
vote
1answer
203 views

Hyper-V Guest RDP keeps asking wrong credentials

I have 3 W2008 R2 Guests running inside a w2008 R2 Hyper-V Host. All three VMs are part of a domain, All with RDP enabled, the machines have the following names and ports HOST1 3389 VM1 3401 VM2 ...
1
vote
2answers
138 views

Hyper-V network considerations (hosted server)

I have a hosted dedicated server, that I would like to run Hyper-V on including TMG as an edge to secure the environment. But because this is a hosted server, I have a few questions that I hope you ...
1
vote
4answers
142 views

Win Server 2008 + Virtualization, A Beginners question

I want to start my first virtualized work environment and i don't know what is better to do. I have windows 2008 R2 Std edition. i want to setup 2 HyperV machines Do i first setup the windows ...
0
votes
1answer
444 views

How to boot a Hyper-V Virtual Machine with a PXE server

I am trying to boot a virtual machine created in Hyper-V Manager. I want to boot from the NIC so that the VM can connect to the PXE server (by pressing F12 numerous times). The thing is, I cannot get ...
2
votes
2answers
302 views

Time Synchronization for Domain Controllers Virtualized Via Hyper-V

I would like to know if someone can recommend a better way to configure domain time synchronization for a group of Windows Server 2008 R2 servers than what I currently have configured. I have three ...
4
votes
1answer
83 views

Restoring individual Hyper-V machine backed up with Windows Server Backup?

Is it possible to restore Hyper-V virtual machine (just one of 4) using Windows Server Backup (if it was backed up first)? Or is there no way to do individual and every time one machines goes bad full ...

1 2 3 4