IBM is a computer hardware and software vendor operating in a variety of market spaces, including Unix systems, "midrange" (AS/400) systems, Mainframes, and consumer workstations/laptops. This is a generic tag designed to be used if no more specific tag exists for your IBM product. See the partial ...

learn more… | top users | synonyms

1
vote
1answer
367 views

IBM ServerRaid lost Raid-5 configuration

I have an IBM server x3400 with 8 drives divided into two arrays. After reboot, ServerRaid lost the configuration of the Raid-5 array. The 6 drives that used to be part of this array are there, but it ...
1
vote
1answer
99 views

Ctrl + Alt + F1 blank screen in IBM server model x3650

I have 3 IBM sever, model x3650. I have installed the Debian squeeze OS. After successful OS installation , if I press Ctrl + Alt + F1 I am getting blank screen only. But If I gives username and ...
1
vote
1answer
121 views

Cannot establish IP communication with IBM Server Connectivity Module

I have attached an IBM Server Connectivity Module in Bay2 of our BladeCenter E and tried to setup some networking between an external unmanaged switch and the internal blade servers. I plugged a ...
1
vote
1answer
106 views

What is a Server Connectivity Module for IBM BladeCenter?

Here in the IT dept we've recently got a (not new) IBM BladeCenter and I found two Server Connectivity Module unused. From the MM web UI, I tried to configure a IP address to find out what features ...
1
vote
1answer
90 views

IBM serveraid problems

When I start my server serveraid gives me this error: not responding properly Error 00D0 any help would be appreciated. I can't find any information on this. Where can I go to get more information on ...
1
vote
1answer
37 views

IBM Tivoli Reclaim vs Update

What is the difference between TSM reclaim vs update? I have accidentally run the reclaim command on my offsite pool? Is it fine to run the reclaim command on offsite pool or is there a bad impact by ...
1
vote
1answer
75 views

how to access LPD data from the OS

We have several IBM System x servers, each of which has a "Light Path Diagnostic" (LPD) panel of LEDs. I want to be able to monitor the status of the LPD alerts from Nagios, but can't find where they ...
1
vote
1answer
64 views

Sending multiple emails and not marked as spam using Domino

I would like to send mass emails to about 2,000 addresses. However, if I send them at once, then antivirus engines mark them as spam suspects Is there a functionality or feature that we can provide ...
1
vote
1answer
356 views

IBM bladecenter blade IMM logs

We have an IBM bladenter H with heterogeneous blades running RHEL 6. Is it possible to download and clear the on-blade IMM logs via IBM supplied command line tools such as ipmitool, asu, dsa or other ...
1
vote
1answer
113 views

Query IBM domino server linux package

I have used rpm -qa to export the list of package installed on the linux machine. After which, I didn't see any IBM domino server related packages in the exported file. May I know what is the ...
0
votes
1answer
233 views

How to boot to BIOS - IBM System X3400 M3

I need help to boot to BIOS for my IBM System X3400 M3. What I know is pressing F12 to boot to BIOS. But every time I presses F12 it never go to BIOS. Instead it boots to my ESXi. UEFI is very slow. ...
0
votes
1answer
110 views

IBM SAS RAID Controller: POST results not complete

I have two IBM SAS RAID Controllers (17P9277/43W3630). One of them will not POST and fails with the error: POST results not complete: FF What can I do to fix this?
0
votes
1answer
85 views

IBM TS 3310 upgrade firmware

Am I allowed to upgrade firmware (by self) for tape library IBM TS 3310 which service support contract has been finished?
3
votes
0answers
107 views

UID/username lookup on IBM z/os USS

How can I associate a UID to a specific username on IBM z/OS Unix System Services? Within USS, I see content created in my user space which I do not own. File ownership lists a three digit ...
2
votes
0answers
49 views

IBM M1115 and LSI 9211-8i IT mode

I have an IBM M1115 RAID Controller. It has 8 Seagate SATA drives connected to it using what I assume is a forward breakout cable (SFF-8087 to 4x SATA). When I power it up without flashing to LSI ...
2
votes
0answers
20 views

IBM Blade Center - Power Consumption with SNMP & IPMI

We have the need to follow and manage the power consumption of each blade, one by one, from our IBM Blade Center system. Is there a way to do this ? Anyhow it’s a licensing upgrade or ...
2
votes
0answers
66 views

IBM xSeries 306 CPU Speed

I have an IBM xSeries 306. The system has been flawless until a week ago. It's a Pentium 4 Dual Core CPU. The CPU speed is 3.20 gHz. Now, it shows 4.26 gHz or 2.16 gHz when the POST screen comes ...
2
votes
0answers
222 views

Configuring LACP across a IBM B50G switch stack

Is it possible to configure LACP (Link aggregation control protocol) that spans across two IBM B50G stacked switches. Below is an illustration of what I am trying to accomplish. I have currently ...
2
votes
0answers
51 views

Cognos Contributor 8.3 — importing rights fails without error

Under Development -> Rights we are trying to import a rights file and it will not take. The result is that the file loads, the table on the screen blinks and then whatever rights were there persist. ...
1
vote
0answers
26 views

Regarding 10GB ISCSI using flex system

Currently we want to implement the 10gb ISCSI SAN. So we are planning to buy the below hardware: 1) IBM flex system enterprise chassis 2) Two X240 nodes with CN4054R 10gb Virtual Fabric Adapter ...
1
vote
0answers
22 views

WebSphere - Jython command to view an Application's memory usage

Using IBM WebSphere Application Server version 8.0.0.1, is there a way to view the memory usage of a running application on the server? Something with Jython or Jacl? I can view the memory usage of a ...
1
vote
0answers
40 views

IBM BladeCenter H networking

I'm new to the IBM BladeCenter H, and I'm trying to figure out the networking side of it. I've installed a windows server OS on one of the blades, and am trying to fiddle with it's network setup ...
1
vote
0answers
55 views

“Firmware progress error” reported by blade in IBM BladeCenter S

I have a BladeCenter S with three blades installed. Two of my LS21 blades are reporting the following error in the web-based Advanced Management Module: (12/20/13 10:49:19) (LS21 2 Core 2K8) ...
1
vote
0answers
48 views

What technical issues should I be aware of when re-mapping a LUN from one host to another?

I inherited an IBM System Storage DS4000 SAN with an AIX environment running Oracle RAC (3 nodes). One of the nodes crashed, so I got the system up and running with 2 nodes; however, the node that ...
1
vote
0answers
147 views

Error in AIX : 0516-040 : Unable to read the specified physical volume

Please provide me your valuable suggestions on the error beow in AIX. When I'm running the following command on the AIX server lsvg -l rootvg I'm getting this error: 0516-040 : Unable to read the ...
1
vote
0answers
53 views

Time Estimate for Backup Recovery with IBM System x3650 M3

I've been doing a little business continuity planning research for myself and I have come to the question of: What is the estimated time for the recovery of about 4 TB worth of data with the use of ...
1
vote
0answers
82 views

File I/O Throughput

I have an IBM x3650 M4 server (64-bit) running Ubuntu 13.04 Desktop (32-bit). I realize that this is a non-standard setup by it's being driven by other requirements. I am seeing slow file writes ...
1
vote
0answers
32 views

Is it possible to enable WLM for Stored Procedures through DB2 on z/OS

If core WLM is not available for all built-in Stored Procedures in a DB2 on z/OS, would it be at all possible for a DB2 user with all privileges to setup the core WLM environments through a CLPPlus ...
1
vote
0answers
169 views

How to change IBM WebSphere Network deployment passwords?

How i can change the following for IBM WebSphere Network Deployment : 1- Deployment Manager Administrative console password 2- Application Server Password Note : OS is UNIX-AIX
1
vote
0answers
357 views

Errors installing iSeries Access for Windows on Win 2008 server

I am desperately in need of help here. I am trying to install the iSeries Access for Windows software on our development server and can't get past the install. Here were my installation ...
1
vote
0answers
81 views

Websphere Application Server CE V7 server not starting

I just installed the Websphere Application Server - Community edition V7 and everthing was fine during installation. Just after the installation First Step screen appeared and every functioning was ...
0
votes
0answers
10 views

Howto configure Raid on IBM x3500 m3

I have recently acquired an old IBM x3500 m3 and I'm struggling to find the raid configuration. I've checked out everything in the uefi and post doesn't show any key combinations to access ServeRaid. ...
0
votes
0answers
11 views

How to call a program on AS400 via SNA using Host Integration Server

I have configured an SNA Service on Host Integration 2013 to communicate with a Mainframe (AS400). We have confirmation that the link is working and we are able to connect via 5250 Terminal emulator. ...
0
votes
0answers
10 views

IBM x 3650 M4 - enable disk slots 4-7

I have a x3650 with a ServeRaid 5110 controller. I have six disks installed - first 3 as one RAID5 array, and I want to set the second 3 up as another RAID5 array. However, only slots 0-3 seem to be ...
0
votes
0answers
14 views

Xenserver doesn't see both cpu

Our company bought an IBM X3550 M4 server (Intel Genuine CPU). The problem is, when we set up dom0, the system only sees one CPU insted of two. "xm top" command also shows only one.
0
votes
0answers
67 views

DS3300 Out-of-Band Managment through IBM Storage Manager

I started using an IBM Ds3300. At first we used 3TB SATA disks, then switched to 2TB SAS. Before, I could see the managment ports with scan and ping, also I was able to connect to them using the IBM ...
0
votes
0answers
81 views

Windows DB2 9.7 FP8 - The request failed because private virtual memory could not be allocated. SQLSTATE=57011

I have a Windows DB2 9.7 FP8 server running on Windows 2003 x86 that for some reason every time I launch Center Administrator or the CLI and try to connect to a database, I get the error "[IBM][CLI ...
0
votes
0answers
48 views

IBM IPMI power supply

I need to work on a customer cluster setup. I'll go with corosync/pacemaker. I need to setup fencing but all "I" (read: the customer) can offer is IPMI. I am worried about not being able to fence ...
0
votes
0answers
46 views

How to manual config hot spare coverage for diskarray IBM DS and Dell MD series?

I have disk array with many expansion enclosure with mixed disk type (SAS 7.2k and SAS 15k for example). I want to have one hot spare per one enclosure. -Enclosure 0 with SAS 15k will have one ...
0
votes
0answers
20 views

Consistency check process

I have a question we having some issues with IBM Read Patrol and consistency check running at the same time. My question is if I dsiable consistency check how can i see that this process is running or ...
0
votes
0answers
121 views

IBM Storage DS3400 flashed firmware from 6.x to 7.x, now storage is unresponsive

I actually missed to flash the ESM firmware prior to the controller and NVSRAM firmwares. Current stage is, SMClient GUI cannot detect the storage. I can ping and telnet in one of the controller ...
0
votes
0answers
94 views

IBM chassis management module LDAP setup

Looking at the CMM running the August 2013 firmware (just updated firmware to latest release), it looks like the LDAP setup fields are the same (though in a different order) as the system X IMM2. I've ...
0
votes
0answers
94 views

Failed to allocate an SSH connection Error on DataPower When Transferring Files Between SFTP Servers

When I am trying to automatically move files from one SFTP server to another using IBM Data Power, I am receiving "Failed to allocate an SSH connection Error on DataPower (no connection)" errors. ...
0
votes
0answers
41 views

IBM rack server memory configuration for mixing 1R and 2R RAM

I am currently documenting the specifications to purchase IBM x3650 M4 server. I am going for two Quad core Intel Xeon E5-2609, 2.4 GHz, 10 MB cache and 16GB PC3L-10600 CL9 ECC DDR3 1333MHz LP RDIMM. ...
0
votes
0answers
99 views

Blocked Threads server.startup :2

I have an issue on IBM-WAS 7.0.23 , to solve it I analysed the core dump files , when I do that i found 18% blocked threads and the reason of this blocked threads other thread called " server.startup ...
0
votes
0answers
212 views

IBM Bladecenter Nortel switch issue

We have a IBM Bladecenter with integrated Nortel switch. The problem is I am not able to change anything on the switch because I am getting the following errors: >> azimov-in - Main# diff Diff ...
0
votes
0answers
146 views

boot IBM p series 650 from 3580-L23 LTO-2 tape

We have a p series 650 that has a dds4 tape drive built-in. In the past, recover has been as simple as putting a mksysb tape into the drive and booting the machine. During boot, the machine detects ...
0
votes
0answers
564 views

IBM System x-3550 m2 won't start

I have a system x-3550 that won't start. It is in the process of being rebuilt as an Exchange server, so it wasn't in production yet, and while I was on leave it got turned off (properly I might add, ...
0
votes
0answers
404 views

Ubuntu Server 11.04 on IBM Ultra320 SCSI 15K RPM

I'm trying to install Ubuntu Server 11.04 on an IBM HDD (namely Ultra320 SCSI 15KRPM). The problem is the installer won't detect any drives until I load the correct drivers. However, I'm not able to ...
0
votes
0answers
240 views

IBM eServer 326m hard disk(s)

pretty new one on this website (for asking questions at least :) ) I have a problem with an IBM eServer 326m series, regarding the hard-disks. In the datasheet it says that it supports up to 600GB ...