IBM is a computer hardware and software vendor operating in a variety of market spaces, including Unix systems, "midrange" (AS/400) systems, Mainframes, and consumer workstations/laptops. This is a generic tag designed to be used if no more specific tag exists for your IBM product. See the partial ...

learn more… | top users | synonyms

-2
votes
1answer
103 views

My IBM server X 3400 stops suddenly and it does not power up? [closed]

My IBM server X 3400 shut down suddenly one fine day. When I use the power switch to power it on, it starts and then shuts down without any sign of flaws. When I took off the power cords and then I ...
-1
votes
1answer
186 views

How IBM Implement WebSphere Application Server SDK for Sun Solaris OS

I deploy the same application in IBM-WAS on different OS ( Windows , AIX and SUN-Solaris ) , SDK errors appeared on SDK for just Solaris OS , I refer some sites and it talk that the SDK on Solaris OS ...
1
vote
1answer
127 views

IBM Bladecenter S: Disk Storage Module with 'non-supported' IBM SAS disk

We have IBM Bladecenter S with 6-Disk Storage Module (43W3581), and we need to add more disks to the system. We currently bought 4x 49Y1861 (IBM 450GB 3.5" 15K 6Gb SAS HDD), but they didn't fit the ...
1
vote
1answer
481 views

Compatibility IBM DS3400 with 3TB sata disk

I've a IBM DS3400 with 4 disks sata 500GB and 5 disks 146GB SAS I want enlarge my sata storage with 3TB disks.. what i've to do? first question: Does IBM DS3400 recognize 3TB sata disks ? second ...
1
vote
1answer
120 views

IBM serveraid problems

When I start my server serveraid gives me this error: not responding properly Error 00D0 any help would be appreciated. I can't find any information on this. Where can I go to get more information on ...
3
votes
1answer
81 views

Is it possible to connect a FC HBA 8 Gb through 10 Gb Ethernet SFP+?

I have to connect an IBM Server with a QLogic EP2532 to an IBM DS3512 with a PMC PM8032. I need two 8 Gb FC LX 1310 nm SFP+ modules and since they seem to be hard to get, I thought would it be ...
1
vote
1answer
45 views

IBM Tivoli Reclaim vs Update

What is the difference between TSM reclaim vs update? I have accidentally run the reclaim command on my offsite pool? Is it fine to run the reclaim command on offsite pool or is there a bad impact by ...
2
votes
0answers
359 views

Configuring LACP across a IBM B50G switch stack

Is it possible to configure LACP (Link aggregation control protocol) that spans across two IBM B50G stacked switches. Below is an illustration of what I am trying to accomplish. I have currently ...
1
vote
2answers
103 views

What other tape manufacturers can I use in IBM LTO Gen 3 SAS Tape Drives

I have recently just got my hands on an IBM 3580S3V. I was just wondering if there are any other brands that I can use in this IBM gear? LTO media are usually manufactured only by EMTEC, Imation, ...
0
votes
1answer
59 views

How I can Monitor other application and resources from IBM WebSphere Application Server 7.0

I have IBM WebSphere Application Server+ 7.0 , and I deploy many java application on this server , from other hand I have stand alone java application ( this application is financial application and ...
0
votes
1answer
1k views

IBM Domino 8.5.3 and mitigating the BEAST attack on TLS (SSLTest)

Having run https://www.ssllabs.com/ssltest/index.html on a newly built Domino 8.5.3 server, is it possible to configure for ...
0
votes
2answers
663 views

IBM DS3512 Connection to IBM HS22 BladeCenter

I have a BladeCenter HS22 with 14 bladeservers. Attached to the BladeCenter I have a DS3512 storage array. I'm trying to access the DS3512 to configure it but can't manage to do it. I have connected ...
0
votes
2answers
1k views

No match for a database image file was found based on the source database alias “URCDB”

I used IBM Data Studio to backup a test database named URCTEST. Now, I want to restore it to the actual (empty) database, URCDB. I've got little experience with IBM DB2, so I assumed this was ...
1
vote
3answers
3k views

Clear the fault LED on an IBM x3650 M4 after accidental disk insertion and removal?

The server had a disk added, and then the operator realized they put the disk in the wrong server, so they pulled it out again. No harm done, the server is running and the disk was never actually ...
4
votes
1answer
1k views

iis 7 application pools not starting after installing ibm client access

I have a windows 2008 dev/testing server setup for testing web apps. I just installed ibm client access (v6r1m0) and after my reboot my sites now get a 503 service unavailable error. My application ...
0
votes
1answer
86 views

How can I migrate from IBM BladeCenter chassis E to chassis H?

I'm planning to migrate blade server HS22 and all modules (2 ESMs, 2Brocade SAN Switch modules) from chassis E to chassis H. Do I need to reconfigure all modules? And how about servers? Please share ...
1
vote
2answers
1k views

IBM System x3400 M2 alert display

My server, IBM System x3400 M2, is alarming in displaying an amber "!" exclamation. I have not have configured the management port. Is there any software to identify this alert?
0
votes
1answer
823 views

IBM IMM2: Which level to control power and have remote terminal access

We're looking to purchase an entry level System X server, specifically the x3100 M4. What I've been unable to figure out is what the lowest level of IMM2 we need is in order to remote the system ...
0
votes
1answer
239 views

IBM Blade HS21 Processor Compatibility

Can anyone tell me of a resource where I can find out specifically which IBM HS21 blades support which processors. In particular I have Intel 2X E5420 and Intel 2X E5450 which will work in some of my ...
1
vote
1answer
887 views

Diskette animation booting IBM x3550 7978CBG

I have to manage / reinstall an ibm x3550 model 7978CBG server but it can't boot from cd. I have put in the cd some bootable cd's such Centos 6 ( some flavors ) and Proxmox ve but the server does not ...
0
votes
2answers
1k views

install third party ssd in ibm xseries x3650 M4

i am in the process of purchasing a new network server, it's going to host SQL Server and Exchange so i would like to have the best possible IO, the ibm SSD i could afford it's the micron P400e, i ...
1
vote
2answers
1k views

Monitoring disks from ServeRAID array

I am looking for a way to monitor individually the disks an array on a ServeRAID device using smartctl. The RAID is seen as a single disk /dev/sda by Ubuntu 12.04 LTS. The ServeRAID is a ServeRAID - ...
0
votes
1answer
766 views

How does one reboot an IBM ds3300?

We have an IBM System Storage DS3300 Express SCSI Dual Enclosure Controller Mfr P/N 172632E that needs to be rebooted. How does one accomplish this?
2
votes
4answers
2k views

IBM Xseries 3400 only working while power button holding pressed

I have an IBM xSeries x3400 Intel Xeon server which only works while someone holds in the power button. My server stopped working and I sent it to IBM Service. After a few hours they told me I could ...
0
votes
1answer
187 views

What are the ports that should be open between Deployment Manager and Application Servers?

I install Deployment Manager and Application Server on different servers each one exist on different zone as following : 1- Deployment Manager : Web Zone . 2- Application Server : App Zone . What ...
0
votes
0answers
288 views

IBM Bladecenter Nortel switch issue

We have a IBM Bladecenter with integrated Nortel switch. The problem is I am not able to change anything on the switch because I am getting the following errors: >> azimov-in - Main# diff Diff ...
0
votes
1answer
629 views

How I can configure IBM Websphere application Server to send notification emails on out of sync?

I need to activate notification email on IBM WebSphere Network Deployment when the application servers are out of sync.
0
votes
2answers
7k views

How to switch off storage IBM DS 3512?

It is a very simple question... How to switch off the storage (ex for maintance)? I really don't know if there is a standard procedure to switch off a SAS storage. I did not find any switch to push ...
0
votes
1answer
4k views

What is “Data Protection” option in WebBIOS 6.1-45-Rel of ServeRAID M5110e controller?

What is "Data Protection"`option in WebBIOS 6.1-45-Rel during creation of new Drive Group? Server is IBM x3650 M4 with ServeRAID M5110e controller. User's Guide (here ...
1
vote
1answer
3k views

How to get multipath working for Ubuntu Server 12.04

I'm working on a project which aims to make use of Ubuntu servers running on enterprise class hardware. In our case that means IBM HS23E blade servers, QLogic 4GB fibre channel extension cards and ...
4
votes
2answers
716 views

Using SFTP on AS400 Non Linux Based OS

I am trying to establish an SFTP connection on an AS400, which is on an OS that is not running a Linux based kernel. Any idea where I can start with this?
-2
votes
1answer
223 views

Bladecenter-E Power Module fault [closed]

We have problem on IBM Bladecenter-E Critical Events Power module 2 is off. DC fault. Power module 4 is off. DC fault. Warnings and System Events Insufficient chassis power to ...
0
votes
1answer
610 views

How to disable the RAID in x3400 M2

Hi I just wanna disable the default RAID in my server IBM System X3400 M2 Server(7837-24X),i have 3 disk drives SAS. I want to make them a JBOD "Just a Bunch Of Disks", because I want to install in ...
0
votes
1answer
72 views

How I can generate patch from RAD ready to deploy in WAS?

To use update option directly from IBM WAS-ND , I need to generate patch file from RAD ready to deploy ( already packaged ) . Example : After Deploy HelloWord.ear on WAS-ND 7.0.11 , an exception ...
3
votes
1answer
137 views

IBM Server searching for secondary server

I just bought the following server IBM System x3950 Server, 4 x 3.0GHz Dual Core, 32GB, 6 x 73.4GB 10K SAS RAID, 256MB BBWC, 2x Power, CD-RW/DVD When i boot it up, it says "Searching for secondary ...
0
votes
1answer
3k views

Megaraid Firmware fault

After building a new server (IBM X3550). Getting error Firmware is in Fault state: MFI register state 0xF0FF2102. -- For this one could not get any help in google. And on the BIOS system setting ...
1
vote
2answers
68 views

Why do a lot of IBM webpages have something like “www-01”? [closed]

I was looking at this page http://www-01.ibm.com/software/integration/webphere-business-modeler/advanced/features/ and I noticed that a lot of IBM pages have "www-01." prefix, why is that? I thought ...
-2
votes
1answer
691 views

Windows server 2012 guest + centos host + IBM server x3650

I was told by IBM sales that x3650 doesn't support windows server 2012. I feel it's ridiculous as x3650 is their enterprise model, just one level below its highest class x3850 in their system x ...
2
votes
1answer
886 views

HyperV Cluster using IBM X3650 M3 and DS3400 SAN

I am posting here, because reading a lot of documents on MS site and technical forums have caused only more confusion. The equipment i have: 2 IBM X3650 M3 servers; both have 2 72GB SAS disks ...
2
votes
2answers
2k views

IBM x3400 upgrading to 2 x CPU Quad-Core Intel Xeon E5430

I'm trying to install two Quad-Core Intel Xeon E5430 CPUs in an IBM x3400 with an IBM M97IP motherboard. When I turn the power on, it takes approx. 3 sec. then the fan stops and nothing happens. ...
0
votes
1answer
211 views

Unable to connect to IBM G8000R via serial

I have just received a new IBM switch, a G8000R. It's written on the guide it is necessary to establish a connection between switch and hyperterminal console. So I have connected the switch via a ...
1
vote
1answer
362 views

How to change IBM WebSphere Network deployment passwords?

How i can change the following for IBM WebSphere Network Deployment : 1- Deployment Manager Administrative console password 2- Application Server Password Note : OS is UNIX-AIX
3
votes
0answers
156 views

UID/username lookup on IBM z/os USS

How can I associate a UID to a specific username on IBM z/OS Unix System Services? Within USS, I see content created in my user space which I do not own. File ownership lists a three digit ...
0
votes
1answer
582 views

ServeRAID M5015 Controller upgrading hard disks without downtime or data loss?

The configuration is as follows: 13 x 450G disks on RAID5 with 1 hot spare. There 2 more disks but configured as RAID1. Is it possible to upgrade the hard disks without downtime or data loss?
0
votes
1answer
237 views

IBM WebSphere Application Server Fix Pack Installation

I'm trying to install a fix pack for IBM WebSphere Application 6.0.2.15 in Windows 2003. This was installed without the IBM Installation Manager (don't know how). Now I have to install the Fix pack ...
5
votes
1answer
624 views

“runas” or “sudo” equivalent on AS400 IBM iSeries

I'm trying to invoke a program to run as another user (by getting input user/pwd) in AS400 OS using Java. Like runas in Windows or sudo in Unix — what can we do in AS400 OS? I am able to invoke basic ...
0
votes
1answer
701 views

IBM ServeRAID 8k level 1 critical

This is my setup: Lenovo ThinkServer RD140 IBM ServeRAID 8k controller Four Seagate Barracuda 1TB hard discs, organised in two RAID-1 arrays Now the third disk is defunct (orange light flashing). ...
1
vote
1answer
3k views

Accessing IBM IMM settings from Windows?

I have an IBM System x3400 M3 Server -[7379KKG], with Win2008R2 installed in a different country. Somehow the consult who helped me installing it missed the IMM settings, or for some reason I can not ...
1
vote
2answers
145 views

IBM ToolsCenter Bootable Media Creator equivlent for HP Proliant server

Is there any IBM ToolsCenter Bootable Media Creator equivlent for HP Proliant server? With IBM TC BMC I can choose which server i'm using, and it will create a bootable cd for these servers, ...
1
vote
1answer
79 views

how to access LPD data from the OS

We have several IBM System x servers, each of which has a "Light Path Diagnostic" (LPD) panel of LEDs. I want to be able to monitor the status of the LPD alerts from Nagios, but can't find where they ...