I'm part time sysadmin for a small hosting company with currently 20 different public servers. We have a 27 subnet block that gives us a maximum of 30 usable IP addresses. That much I know, but how do ...
I'm looking at setting up a DMZ behind a Cisco ASA that will contain a large number of HTTP front-end load balancers and SSL offload services - over 100 IPs, concentrated on a smaller number of hosts. ...
Should I ever configure a host with a public IP address to accept traffic from a private IP address?
I connect the 'net with a public static IP (my router's IP address for NAT) and a /29 subnet (for machines behind the router). On my router, I have: #sh ip route | inc x.x x.x.0.0/16 is ...
My ever evolving and expanding local area network is currently using a class-C address. My network consists of multiple subnets depending on site/location. 192.168.1.x is site HQ 192.168.5.x is ...
We're in the process of designing a new iteration of our network where we improve resilliency by adding a second datacentre. We'll be adding a second datacentre, with an identical configuration of ...