0
votes
1answer
14 views

ASPEED AST2050 not responding to IPMI Get Channel Cipher Suites

I have a Quanta QSSC-890 in a remote location which supposedly supports IPMI version 2.0 but does not send a response when I issue unauthenticated Get Channel Cipher Suites command. The problem is ...
1
vote
1answer
83 views

ipmitool pef temperature soft shutdown

Recently I've had the technicians switch off the cooling system in the server room, without notifying me first. Since the compute nodes do have IPMI cards from different manufacturers installed, I'd ...
6
votes
3answers
233 views

Dedicated servers - how to protect ipmi

When providing dedicated services, what is your best practise to protect IPMI either from public network or through kernel module. Firstly, I want to be sure that if someone scans my networks and he ...
0
votes
1answer
43 views

Server management IPMI

I have a couple of server I would like to manage, and I will be using IPMI. My question is, what tool should I use? I know about IPMITool and such. But there are also some tools delivered with the ...
0
votes
2answers
169 views

How do I re-enable the IPMI temperature sensors?

I've never had a problem reading temperature sensors with ipmitool on my server, but recently the temperature readings started showing up as disabled: # ipmitool sdr list Temp | disabled ...
1
vote
0answers
290 views

Serial-Over-Lan with Dell R410. Invalid data field in request

It's a R410 with the latest BMC firmware. I can connect it from a MacBook. $ ipmitool -v -I lanplus -H 192.168.1.23 -U root user list Password: ID Name Callin Link Auth IPMI Msg ...
0
votes
2answers
1k views

IPMI: LAN Parameter Data does not match

I have a SupoerMicro board with ipmi, where I have some problems in communication using the LAN channel. The server is running PFsense (netbsd) and I can sendt commands to the local ipmi controller ...
1
vote
2answers
308 views

Unattended Linux installation from PXE using IPMI

This is what I have: Kickstart server with multiple Linux distros on it. Multiple Supermicro server machines I'm connecting using IPMI. What I need: I need some way to run unattended installation ...
2
votes
1answer
1k views

Can I use ipmitool to determine if an IPMI link is 'up'?

I am having a very frustrating time configuring the IPMI interface on a Supermicro box. Unfortunately with IPMI it is not always clear which interface is being used by the BMC. The Supermicro ...
1
vote
0answers
340 views

What do these IPMI System Event Logs mean?

I'm currently trying to troubleshoot what seem to be hardware issues with a x3650 m3 machine. Using IPMItools, I'm reading recurring assertion events from sensor type: 0F, sensor no: B5 that repeat ...
4
votes
3answers
5k views

ipmi - can't ping or remotely connect

I've tried configuring the IPMI controller to accept remote connections, but I can't even ping it. Here is its status: #/usr/local/bin/ipmitool lan print 2 Set in Progress : Set Complete ...
1
vote
3answers
350 views

IPMI sensor data retrieve from HP Superdome (sx2000) with IPMI tool

i'm trying to extract data sensor from a HP Superdome (sx2000) using the protocol IPMI over LAN. I enabled the IPMI protocol and i setup the password for IPMI protocol on the Superdome. I'm using ...
2
votes
0answers
373 views

OS Install Using IPMI Tool

I am working on a script which would allow me to reload the OS on my machine without having to use the IPMI, attach media, hit the DEL key, boot to media, etc. I know once I get media attached using ...
4
votes
1answer
856 views

Running ipmitool as a non-root user

I want to monitor some hardware-related data on a headless CentOS6 server. More specifically, things like voltages, fan speeds, thermal data... Since the server is headless, the best way I found to ...
2
votes
1answer
662 views

IPMI sdr entity 8 (memory module) only showing 3 records?

I've got two Dell PE R710's - A has a single socket and 3 DIMMs in one bank B has both sockets and 6 (2 banks @ 3 DIMMs) filled The output from "ipmitool sdr entity 8" confuses me - according to ...
3
votes
2answers
999 views

IPMI: What is “Planar” temperature?

I'm digging through the output of ipmitool sdr list on a Dell PE R710 - and I see there's a sensor reading named "Planar Temp" - which reads higher than the ambient temperature but lower than the CPU ...
2
votes
2answers
4k views

How can I find out if my server has IPMI of some sort?

I've never seen a Linux server I admin. How can I find out if it has IPMI of some sort installed? I tried answering my own question by installing ipmitool: Setting up ipmitool (1.8.9-2) ... Starting ...
2
votes
1answer
540 views

Getting LCD message through IPMI form Dell Server (Poweredge R710)

I'm exploring the IPMI interface (using ipmitool on ubuntu 11.10, remotely over LAN) and can perform various operations however, I can't view the status message displayed on the LCD. ipmitool ...
2
votes
1answer
786 views

Is it possible to restart a supermicro kvm with ipmitool? (the kvm not the server)

The KVM on my supermicro motherboard seems to have crashed or is otherwise not answering network requests on it's assigned IP address. I need to try to restart the KVM (not the server). Is this ...
0
votes
2answers
5k views

Power management over IPMI and HP iLO2

I tried to reboot server over IPMI and the integrated service processor/BMC. It worked for IBM server with an Integrated Management Module (IMM), but failed with HP iLO2 (FW v2.05). I used ...
4
votes
5answers
1k views

DHCPDISCOVER requests from an off-by-one MAC address

In a Linux DHCP server I'm getting a bunch of these log lines: dhcpd: DHCPDISCOVER from 00:30:48:fe:5c:9c via eth1: network 192.168.2.0/24: no free leases I don't have any machines with ...
0
votes
4answers
3k views

SuperMicro BMC on OpenSuSE Linux --cannot access from LAN

I have an (old) SMC-001 IPMI device on an (old) X6DVL-EG2 motherboard. My problem is that I cannot access the BMC from LAN. I'm also getting some interesting output from ipmitool. First, the setup. ...