0
votes
0answers
24 views

Cannot connect to IPSEC/L2TP VPN Arch Linux/Windows 8

I have check a lot of other L2TP/IPsec VPN post and none of them seem to quite match the issues I am having so here is what going on. I am trying to set up a VPN on my Arch Linux server that I can ...
0
votes
1answer
53 views

Openswan and OpenVPN

I have installed Openswan and have configured IPSec tunnels and they work perfect until i install OpenVPN. Now i can't find out way the ping wont work. When i execute the "service ipsec status" it ...
3
votes
1answer
82 views
+150

TCP connection through IPSec (Linux/Strongswan) stalls after exceeding PMTU

The backups (via Bacula) of one of my servers (“A”) connected via IPSec (Strongswan on Debian testing) to a storage daemon (“B”) don't finish 95% of the times they run. What apparently happens, is: ...
1
vote
0answers
48 views

Windows 7/8 Strongswan IKEv2 Wrong Gateway

I have setup Strongswan on Ubuntu 14.04 from the official package. I use IKEv2 with PKI authentication and a custom authorization plugin. This works great for Android and Ubuntu clients using ...
1
vote
0answers
26 views

Route between two branch offices via IPsec VPN to head office?

I have TMG 2010 running on Server 2008 R2 in our head office with 2 branch offices connecting in using Dray Tek 2930 routers with IPsec site to site VPNS. The remote sites can route between the head ...
0
votes
0answers
191 views

Vpn tunnel to Amazon VPC with pfsense

I'm trying to create an ipsec tunnel between my office and our Amazon VPC. However I have never used ipsec before so I'm at lost. The gateway/firewall is running pfsense 2.1.3-RELEASE (i386) on ...
0
votes
1answer
42 views

xl2tpd doesn't connect and no logs with Openswan

I'm using Openswan and xl2tpd to set up a VPN connection for a Windows computer, everything looks perfectly configured and the IPSec connection is successful : STATE_QUICK_R2: IPsec SA established ...
1
vote
2answers
339 views

Strongswan (IKEv2) connection established, but no traffic routing

I've seen this sort of question posted a few times before, but so far, none of them have solved my issue. I'm trying to set up an IKEv2 VPN on my Ubuntu Server to use with my Windows Phone using ...
0
votes
0answers
103 views

Openswan sessions hanging with multi user VPN configuration (ipsec/l2tpd)

I've got a linux box running openswan and xl2tpd. It's a simple configuration with multiple users connecting using a sharedKey, and then establishing an L2TP connection with PPPD providing the ...
1
vote
0answers
95 views

Is it possible to do IPSec Site to Site VPN without static & public IP on one end?

I am working on a project for my engineering degree that requires me to interface with some pre-existing equipment, so I am rather limited on my options. I'm rather new to VPN and ipsec for that ...
0
votes
0answers
40 views

Openswan is not restaring

I am configuring new ip-address in configuration file /etc/ipsec.conf & restarting Openswan. But, It struck & not started. Here is my logs: Apr 26 18:02:16 (none) authpriv.warn pluto[11631]: ...
0
votes
0answers
560 views

IPsec Xauth RSA - Debian 7 and Android 4.4 VPN (Always-ON) and Mac OS X 10.9.2 VPN (On Demand)

I successfully installed IPSec Xauth RSA using this instruction: http://jsharkey.org/blog/2012/09/22/deploying-a-pure-ipsec-pki-vpn-server-for-android-devices/ In brief: apt-get install ipsec-tools ...
0
votes
1answer
45 views

User can access Windows based Apache sites but not linux Apache server over site-to-site VPN

I have a user (Win 7 Pro 64-bit) in a satellite office (10.1.0.0/24) that is trying to access web services in our main office (10.0.0.0/16) over a site-to-site VPN between a a Meraki MX60W and a ...
0
votes
1answer
216 views

Openswan is not sending packets on new ip after DPD

I have configured tunnel with DDNS. After appliance get rebooted the other side is not sending packets on new ip-address (even i have set dpdaction=restart). I am using openswan 2.6.38. Here is my ...
0
votes
1answer
141 views

Strongswan with X.509 authentication and LDAP authorization

I would like to setup Strongswan/Libreswan with PKI authentication. Now I have searched and found only how to configure specific accepted client certificates like here: ...
1
vote
1answer
53 views

VPN Tunnel set up Issues - Cisco WRVS 4400N to Server 2008 R2behind ASA5505

I was wondering if someone could help with a scenario i have that i am not sure how to set up regarding a VPN tunnel set up. I have a Cisco WRVS4400N business router , and on this device , i need to ...
0
votes
1answer
184 views

Cannot connect to VPN on Server 2012

We run a small business and have a server that runs our VPN on Windows Server 2012. Our VPN was working fine until we restarted our router and it seems that restart procedure broke the VPN. We are ...
1
vote
1answer
46 views

Is using EAP-MD5 in strongSwan a security risk?

Quoting Wikipedia: It offers minimal security; the MD5 hash function is vulnerable to dictionary attacks, and does not support key generation, which makes it unsuitable for use with dynamic WEP, ...
0
votes
0answers
187 views

OpenSwan VPN Connected but can't ping or connect to anything on right side

On my end is an Ubuntu AWS EC2 VM and on the other end is a Cisco ASA 5500 router. Phase 1 and Phase 2 come up but I cannot access anything on the other end. It would seem there's a routing problem, ...
2
votes
1answer
42 views

Should we accomodate a customer asking us to NAT servers behind new PUBLIC IPs within a VPN?

We're a SaaS provider, setting up a IPSec VPN between our data center and a customer's site so they can directly access their hosted database server from their LAN. Instead of exposing our internal ...
0
votes
0answers
63 views

Site-to-Site VPN not connecting with Cisco 877

I can't seem to get the VPN connection going with my 877. I have an old IOS (12.4) but it looks to me like all the pieces are there. I have compared this config against the Azure-provided (albeit ...
0
votes
1answer
586 views

strongSwan setup where both sides are behind NAT

I'm trying to setup a strongSwan server in my home and connect to it from another network. Let's say sun is the VPN server and venus is the client. Both sun and venus are behind NAT networks. sun is ...
0
votes
1answer
78 views

EAP password prompt in strongSwan

I'm trying to setup a host-host configuration using strongSwan. I did manage to set it up using certificates and now I wish to set it up using certificates + EAP authentication. I mixed this ...
3
votes
2answers
737 views

Is it possible for L2TP VPN to do auto route configuration for client during connected?

We've setup a L2TP VPN server with this tutorial, everything works like a charm. The only issue is We don't want client to route all traffic using this VPN, only a particular subnet, e.g. ...
0
votes
0answers
171 views

Site to site IPSec VPN between Server 2012 and USG 50

I am looking to setup an IPSec VPN server in our organisation using a Windows server 2012 machine with remote access and routing installed. I would then like to perform a site to site IPSec VPN ...
-1
votes
1answer
40 views

Is secure pptp not possible on Ubuntu?

From [1], it was said that 1) All users and providers of PPTP VPN solutions should immediately start migrating to a different VPN protocol. PPTP traffic should be considered ...
0
votes
0answers
223 views

Fortigate VPN can't reach site

I've two Fortigate's here and I use one of them for each site. Site A Site B 192.168.2.0/24 <---------- VPN ...
0
votes
0answers
55 views

Need help troubleshooting QuickVPN hang

have QuickVPN 1.4.0.5 on XP Pro SP3 and am trying to connect to a RVS4000 using its public IP address. QuickVPN gets to "Connecting..." and hangs. The context menu on the systray icon won't come ...
1
vote
1answer
329 views

Cisco IPSEC VPN Slow Speeds

We have a site to site IPSEC VPN, both endpoints are Cisco PIX 515e's. The links at both end are 100mb, however speeds over the VPN (logged using jperf) are at most 4mb. Obviously this represents a ...
2
votes
3answers
459 views

VLAN over VPN (ASA 5520)? if not any other options available?

Is it possible to extend the local VLANs to a Remote site connected by IPSEC VPN using ASA 5520 / Cisco 1841 DSL router. can we have many VPN tunnels between the ASAs? (from every VLAN one vpn ...
0
votes
0answers
189 views

Site-to-Site VPN from Windows Azure to Cyberoam CR25iNG

I'm trying to configure Site-to-Site VPN between Windows Azure and on Premise network using Cyberoam CR25iNG UTM Firewall The Local Network Subnet is 192.168.0.1/20 (192.168.0.0 - 192.168.15.255) ...
0
votes
0answers
297 views

l2tp vpn is disconnected after few minutes

I installed IPSec/L2TP on my vps server. I tried to connect from my mac to this VPN server. First time, connection is succeeded. But after a few minutes, connection was broken by itself. After ...
2
votes
1answer
276 views

L2TP/IPsec through HTTP Port 80

i got an VPN (L2TP/IPsec) Tunnel running on my synology nas. my router is configured for vpn passthrough. so everything is fine. furthermore i got an webservice running on port 80. now i got the ...
1
vote
0answers
473 views

Cannot access L2L VPN from RA VPN connected client on Cisco ASA 5510

We have a Cisco 1921 router running IOS 15.1 at one of our branches which is connected via a L2L IPsec VPN to a ASA5510 running ASA 7.2 at our headquarters. The ASA also provides IPSec Remote Access ...
0
votes
0answers
36 views

simple subnetting, regarding vpn

i am using 2 cisco rv180 to build up a ipsec tunnel. thats working. but i cant get any packets trough the tunnel. first i was using: local: 10.0.0.X 255.0.0.0 remote 10.0.1.x 255.0.0.0 but 0 ...
2
votes
2answers
140 views

VPNs and NetBIOS

I have a Cisco RV180 VPN Firewall Router and I have QuickVPN and PPTP working. However, I am not able to get NetBIOS working so that I can access everything via NAMES or get the systems to show up ...
4
votes
1answer
273 views

Cisco QuickVPN Can't view local computers

I am connected to my QuickVPN connection to my RV180 VPN Router and I can access the router via IP but I can't find or see any of the computers. How can I fix that? Do I need to do some more advanced ...
0
votes
0answers
75 views

Examples of running VPN clients in Amazon EC2

There are a thousand examples of VPN server setups on EC2 - but what are the limitations for running VPN clients on ec2? (to an existing VPN concentrator outside of EC2, for example). OpenVPN is known ...
2
votes
1answer
1k views

Fortigate VPN Routing issue

I have 200B Fortigate unit with 2 internet WAN connections. I also have a remote site which I'm connected to via IPSEC VPN through WAN1. This site has only one GW IP address. I'd also like to setup a ...
0
votes
0answers
358 views

Strongswan ipsec <--> iPhone, can't access LAN

I'm trying to connect to my LAN with iPhone, using Cisco IPsec VPN connection. I can connect to VPN, but I can't access any LAN devices. Hardware/Software: Strongswan 5.0.4, running on router - ...
0
votes
1answer
480 views

VPN Between Checkpoint R75.20 and AWS VPC

I have been trying for a long time now to configure a site-to-site VPN connection between Amazon and a Checkpoint R75.20 (previously i tried with Azure) unsuccessfully. I have tried everything and ...
0
votes
1answer
311 views

StrongSwan + xl2tpd client timeout between 2-5 minutes

I run CentOS 6.4 on Amazon EC2, using xl2tpd-1.3.1 from EPEL repository together with StrongSwan 5.0.4. I setup a simple IPSec connection: conn l2tp type=transport keyexchange=ikev1 ...
0
votes
1answer
80 views

VPN ipsec tunnel from router to single windows server computer (gateway-to-host)

Firstly, is this possible? I haven't seen any posts that talk about this. The situation: 2 different ISP's. One has several servers and a firewall running. The other is limited to only one virtual ...
0
votes
0answers
22 views

Side2Side VPN avoid subnet configuration

I have a side2side VPN created with strongSwan. It is working so far. But I have a basic problem regarding the configuration effort. The VPN Gateway (cloud) should handle a lot of connections from ...
1
vote
1answer
1k views

How do I configure routing for an IPSEC tunnel between Openswan and RouterOS

I am trying to create a site-to-site VPN between a Linux router that runs openswan and shorewall (host A, serving subnet 10.10.0.0/16) and a MikroTek RouterBoard running RouterOS 6.3 (host B, serving ...
0
votes
0answers
80 views

HTTP and SMB over Cisco LAN-to-LAN IPSec-VPN

we are connecting Cisco 887VA router with various other Non-Cisco routers. VPN tunnels are up and we can ping devices on the remote network through the VPN. However, we have a few devices (on the ...
0
votes
1answer
486 views

xauth with ipsec-tools on openwrt: authentication failing?

I'am trying to set up xauth with ipsec-tools on openwrt, my settings show below: cat /etc/racoon.conf: path include "/etc/racoon"; path pre_shared_key "/etc/racoon/psk.txt"; path certificate ...
0
votes
1answer
2k views

strongSwan IKEv2 + Windows 7 Agile VPN: What is causing Error 13801

I have an AWS instance that I want to be a VPN server. It will connect Windows 7 clients to a private network in the Amazon cloud. I have installed Ubuntu 12.04 and the strongswan-ikev2 package. ...
1
vote
0answers
25 views

Multiple IPsec tunnels implented with raccon - need tunnel specific debug output

I have a network appliance box serving as an end point for several site to site IPsec VPN tunnels. raccon's docs specify that a log file can be written to with the -l option. My clunky approach to ...
1
vote
0answers
360 views

How Windows establishes L2TP/IPSEC VPN connection without “IPSec ID” (group id)?

I have a third-party VPN server configured with only 4 credentials given to me: server ip, preshared key, user name and user password. Under Windows 7, i can easily connect to this VPN via standard ...