I currently have an Airport Extreme as my home office firewall. In addition to handling IPv4 NAT, my ISP (Comcast) delegates an IPv6 prefix to the Airport, which in turn assigns the delegated prefix ...
I want to assign multiple IPv6 to a server with multiple NIC. As IPv6 RFC defines, each server has a unique DUID that can have one of the 3 formats (LL, LLT or enterprise). And each NIC has an IAID. ...
I'm using the ISC dhcp server version 4.1 for DHCPv6 prefix delegation on a network. When the server allocates a prefix to a client, the server does not create a route for that prefix to the client ...
I was using this option on ipv4 to send some information to the host. On my host lease I have something like: supersede vendor-encapsulated-options = "MY INFORMATION"; On the DHCP client host I can ...
Is it possible to run pre-Lion OS X in an IPv6-only environment without static configuration? From what I've been able to figure out, OS X 10.6.x will acquire an address via SLAAC, but it doesn't ...
I ask because the server is handling DHCPv6 for two VLANs and I can see some requests both via DHCPv6-relay from our ProCurve switch and via the ff02::0:2 anycast address and responds to both ...
How to configure radvd, dhcpd6, routing and /64 subnet based on delegated prefix by DHCPv6-PD server?
My ISP has just started IPv4/IPv6 dual stack service. In order to connect IPv4/IPv6 internet, almost all users usually use a CPE leased by the ISP. But I want to use my Linux router instead of such ...
I have set up a test ISC DHCP server that is not connected to an internet with DHCP and DHCPv6. I also have a Cisco 3750G with IPv6 enabled. I have firewalls off on both machines. My Windows 7 ...