There exist firewalls from Juniper and Cisco that cost more than a house. So I wonder: what does one get from a $10.000+ firewall compared to an 2U server with 4x 10Gbit network cards running e.g. ...
I have a Juniper EX3300 switch in a data center. And I have connected one of the uplink ports (ge-0/1/0) to my ISP's router. I want to configure it so that all the devices connected to ports in the ...
With OpenVPN there is a well-known option "push" which allows to push an IP static route from the server to a connected OpenVPN client. I would like to know if there is an equivalent of this option on:...
I'm using the Juniper client for OSX ('Network Connect') to access a client's VPN. It appears that the client is configured to not use split-routing. The client's VPN host is not willing to enable ...
Sorry if my explanation is confusing. I need to get all the ip addresses of a Juniper Switch and Router (different models). On Cisco IOS I can get that with show ip interface brief | exclude ...
This is a pretty n00b question. I am integrating a system with a TelCo. The TelCo's policy requires that all communication must be done over VPN using Juniper's SSG-5 firewall. My current host does ...